Apua

Paineputket ja liittimet - Viega profipress g elbow 90° 18 345471 - 345471
Tuotenumero: 2902721

Viega profipress g elbow 90° 18 345471

Press connector system with press connectors and pipes made of copper in acc. with EN 1057 and DVGW worksheet GW 392 suitable for:•Gases in acc. with DVGW G 260 in gas installations in acc. with DVGW-TRGI 2008 (DVGW worksheet G 600) / DVFG-TRF 2012•Liquid gas in the gas phase for domestic and commercial applications, tested in acc. with DVGW worksheet G 5614•Heating oil pipelines for heating oil in acc. with DIN 51603-1•Diesel fuel pipelines for diesel fuel, as suction and pressure pipelines in acc. with EN 590 in consideration of the general technical approval Z-38.4-71Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet G 5614, point 4.4.1, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test

16,66 € 13,44 € Ilman arvonlisäveroa
Edullisin toimitus (yksityisasiakkaat) 6,99 €
Tukkurilla, 3-6 arkipäivää toimitukseen

Viega Profipress G bend 90° 18 Copper/blank, 345471 Product description: Press fitting system with press fittings and copper pipes according to DIN EN 1057 and DVGW work sheet GW 392, suitable for:•Gases according to DVGW work sheet G 260 in gas installations according to DVGW-TRGI 2008 (DVGW work sheet G 600) / DVFG-TRF2012•Bottled gas in the gas phase for household and industrial use, tested according to DVGW work sheet G5614•Fuel oil pipelines for fuel oil according to DIN51603-1•Diesel oil pipelines for diesel oil as suction and pressure linesaccordingtoDINEN590takingintoaccountthe general building authority approval Z-38.4-71Press fittingsAll sizes are equipped with SC-contour - fittings that have not been pressed during installation become clearly visible when the system is filled. SC-contour is certified and meets the requirements of DVGW worksheet G5614, section4.4.1,fittingsguaranteedtobeleaktifnotpressed.During leak tests with water,Viega can detect unpressed fittings in the pressure range from0.1 MPa -0.65 MPa,and during dry leak tests with compressed air or inert gases from22 hPa -0.3 MPa.MarkingsYellow dot,yellow square,and inscription Gas MOP5/GT1SealsHNBR,yellowDimensions/materialStandard sizes:d12,15,18,22 ,28 ,35 ,42 ,54 of copperXL sizes:d64 .0ofcopperPress fittingwiththreadedconnectiond12-54ofredbrassXLpressfittingwiththreadedconnectiond64 .0ofcopperApplicationsNaturalgas/bottledgasFueloil/dieseloil(d12–54)NoteFor use in gas, fuel oil and diesel oil installations, only Viega copper and red brass press fittings marked with a yellow square and Gas MOP 5/GT1 are permitted!In case of use for other than the described applications, contact Viega Service Center to coordinate materials.Operating conditionsGasandbottledgasinstallations•OperatingandambienttemperatureT=-20°Cto+70°C•Maximumoperatingpressurepmax=0.5MPa•Operating pressure at HTB

Valmistaja
Tuotenumero
2902721
Malli
345471
Ean
4015211345471
Valmistajan kotisivuille

Edellä mainitut tiedot/tekniset tiedot ovat suuntaa-antavia ja valmistaja voi ilman varoitusta muuttaa niitä. Pidätämme oikeuden painovirheisiin ja ohjeellisiin kuviin. Jotkin tekstit voivat olla automaattisesti luotuja tai konekäännettyjä, mikä voi johtaa harhaanjohtavaan tekstiin.