ANYCUBIC Water-Wash Resin 2.0 - Transparent
ANYCUBIC Water-Wash Resin 2.0 is a photopolymer resin for LCD and DLP 3D printers using 405 nm UV curing. Its hydrophilic formula allows resin residue to be removed with water instead of IPA alcohol, simplifying post-processing. With a viscosity of 190–230 mPa·s, volumetric shrinkage of 2.2–5.5% and a stated printing precision of 0.15 mm, it produces detailed models with smooth surfaces. The resin also offers 16–22% elongation at break, increased crack resistance, reduced odor and improved resistance to yellowing.
Lue lisää Anycubicista täältä
The resin combines a viscosity of 190–230 mPa·s with volumetric shrinkage of 2.2–5.5%, supporting smooth material flow and detailed prints. A stated printing precision of 0.15 mm enables accurate reproduction of fine model features, while 16–22% elongation at break provides increased resistance to cracking and deformation after curing. Improved build plate adhesion also helps reduce the risk of failed prints.
Finished models have a smooth surface and transparent appearance. The improved formulation helps limit yellowing, while the reduced-odor composition is suited to longer printing sessions. The resin maintains low viscosity at temperatures between 15°C and 20°C and is compatible with LCD and DLP printers using 405 nm UV curing.
Edellä mainitut tiedot/tekniset tiedot ovat suuntaa-antavia ja valmistaja voi ilman varoitusta muuttaa niitä. Pidätämme oikeuden painovirheisiin ja ohjeellisiin kuviin. Jotkin tekstit voivat olla automaattisesti luotuja tai konekäännettyjä, mikä voi johtaa harhaanjohtavaan tekstiin.