Tuotenumero: 2453734
StarTech.com USB 3.0/eSATA 2,5/3,5 tuuman SATA
Cloner, Tallennuslaitteen ohjain kanssa tehon osoitin, 2.5", 3.5", SATA 6Gb/s, 6 Gt/s, USB 3.0, musta
118,64 €
94,53 € Ilman arvonlisäveroa
Ilmainen toimitus noutopisteeseen
Tukkurilla, 6-9 arkipäivää toimitukseen
Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB 3.0 or eSATA for easy access. The SDOCK2U33RE Dual 2.5/3.5" SATA HDD/SSD duplicator dock lets you duplicate/clone an existing hard drive without the use of a host computer system - or dock and swap drives from your desktop or laptop computer simultaneously, using a single USB or eSATA port.
The SDOCK2U33RE offers convenient dual-function performance. As a hard drive duplicator, the SDOCK2U33RE lets you create an exact sector-by-sector clone from one hard drive to another, including partitions and boot sector information - ensuring data integrity and consistency for sensitive operations, such as data recovery. As an external hard drive dock the SDOCK2U33RE lets you connect your drives through either eSATA or USB, with each drive slot individually supporting high capacity 2.5/3.5" hard drives or solid state drives, tested up to 4 TB.
With support for SATA III (6 Gbps) you can maximize efficiency with duplication speeds up to 22 GB per minute, and eSATA docking speeds up to 6 Gbps. The Dock can also be connected through USB 3.0 with UASP for transfer speeds up 5 Gbps (70% faster than conventional USB 3.0).
With push button operation and plug-and play installation, the duplicator dock has been specially designed for hassle-free operation. The SDOCK2U33RE lets you quickly dock your hard drives or start duplicating hard drives with the push of a button. Plus, the built-in LED progress bar saves you time by letting you easily monitor the entire duplication process, so you'll know exactly when it's time to start your next operation.
For added compatibility with different drive types in duplication and docking applications, the SDOCK2U33RE supports the use of various drive adapters. The below list of StarTech.com adapters have been specifically tested, to ensure compatibility with this drive duplicator: 2.5/3.5in IDE drives - SAT2IDEADP; mSATA drives - SAT2MSAT25; M.2 (NGFF) drives - SAT32M225.
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.
The SDOCK2U33RE offers convenient dual-function performance. As a hard drive duplicator, the SDOCK2U33RE lets you create an exact sector-by-sector clone from one hard drive to another, including partitions and boot sector information - ensuring data integrity and consistency for sensitive operations, such as data recovery. As an external hard drive dock the SDOCK2U33RE lets you connect your drives through either eSATA or USB, with each drive slot individually supporting high capacity 2.5/3.5" hard drives or solid state drives, tested up to 4 TB.
With support for SATA III (6 Gbps) you can maximize efficiency with duplication speeds up to 22 GB per minute, and eSATA docking speeds up to 6 Gbps. The Dock can also be connected through USB 3.0 with UASP for transfer speeds up 5 Gbps (70% faster than conventional USB 3.0).
With push button operation and plug-and play installation, the duplicator dock has been specially designed for hassle-free operation. The SDOCK2U33RE lets you quickly dock your hard drives or start duplicating hard drives with the push of a button. Plus, the built-in LED progress bar saves you time by letting you easily monitor the entire duplication process, so you'll know exactly when it's time to start your next operation.
For added compatibility with different drive types in duplication and docking applications, the SDOCK2U33RE supports the use of various drive adapters. The below list of StarTech.com adapters have been specifically tested, to ensure compatibility with this drive duplicator: 2.5/3.5in IDE drives - SAT2IDEADP; mSATA drives - SAT2MSAT25; M.2 (NGFF) drives - SAT32M225.
UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing UASP also shows an 80% reduction in required processor resources.
Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.
Valmistaja
Tuotenumero
2453734
Malli
SDOCK2U33RE
Ean
0065030855884
Valmistajan kotisivuille
Tuotekuvaus
Startech Dual Bay Hard Drive Duplicator, Standalone USB 3.0 (5 Gbps) eSATA to 2.53.5 SATA III HDDSSD ClonerCopier, Hard Drive Docking Station - Hard Disk Cloner - tallennuslaitteen ohjain - SATA 6Gb/s - USB 3.0
Laitteen tyyppi
Tallennuslaitteen ohjain - ulkoinen
Bus-tyyppi
USB 3.0
Väri
Musta
Laajennusmuistit
2 x pikavaihto - 2,5" / 3,5" jaettu
Hard Drive Form Factor -yhteensopivuus
2.5", 3.5"
Ominaisuudet
Tehon osoitin
Liitäntä
SATA 6Gb/s
Tiedonsiirtonopeus
6 Gbit/s
Tuetut laitteet
Kiintolevyasema
Virransyöttö
AC 120/230 V
Järjestelmävaatimukset
Linux, Microsoft Windows 2000, Apple MacOS X 10.6 tai uudempi, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2008 (32/64-bits), Microsoft Windows Server 2003 (32/64-bits), Google Chrome OS, Windows 8 (32/64 bits), Windows 8.1 (32/64 bits)
Ulkomitat (PxSxK)
13.2 cm x 14.8 cm x 7 cm
Paino
1 kg
Suunniteltu malleihin
P/N: SVA12M5NA
Yleistä
Laitteen tyyppi
Tallennuslaitteen ohjain - ulkoinen
Hard Drive Form Factor -yhteensopivuus
2.5", 3.5"
Host Bus
USB 3.0
Väri
Musta
Ominaisuudet
Tehon osoitin
Tallennusohjain
Liitäntä
SATA 6Gb/s
Tiedonsiirtonopeus
6 Gbit/s
Tuetut laitteet
Kiintolevyasema
Laajennus / Kytkeytyvyys
Paikkaa
2 x pikavaihto - 2,5" / 3,5" jaettu
Liitännät
1 x SATA 6Gb/s - eSATA
2 x SATA 6Gb/s - SATA combo
2 x SATA 6Gb/s - SATA combo
Yhteydet
1 x USB 3.0 - 9 pin USB Type B
Muuta
Ominaisuudet
Testattu enintään 4 Tt 7200 RPM 3,5" kiintolevyillä, testattu enintään 2 Tt 5900 RPM 2,5" kiintolevyillä
Yhteensopivuusstandardit
Plug and Play, FCC, RoHS
Virransyöttö
Tyyppi
Virtasovitin
Vaadittava jännite
AC 120/230 V
Ohjelmisto / Järjestelmävaatimukset
Vaadittu käyttöjärjestelmä
Linux, Microsoft Windows 2000, Apple MacOS X 10.6 tai uudempi, Microsoft Windows Vista (32/64 bits), Microsoft Windows 7 (32/64 bits), Microsoft Windows XP (32/64 bits), Microsoft Windows Server 2008 (32/64-bits), Microsoft Windows Server 2003 (32/64-bits), Google Chrome OS, Windows 8 (32/64 bits), Windows 8.1 (32/64 bits)
Mitat & paino
Leveys
13.2 cm
Syvyys
14.8 cm
Korkeus
7 cm
Paino
1 kg
Ympäristötiedot
Vähimmäiskäyttölämpötila
5 °C
Enimmäiskäyttölämpötila
35 °C
Toimintakosteus
20 - 80%
Yhteensopivuustiedot
Suunniteltu malleihin
P/N: SVA12M5NA
Edellä mainitut tiedot/tekniset tiedot ovat suuntaa-antavia ja valmistaja voi ilman varoitusta muuttaa niitä. Pidätämme oikeuden painovirheisiin ja ohjeellisiin kuviin. Jotkin tekstit voivat olla automaattisesti luotuja tai konekäännettyjä, mikä voi johtaa harhaanjohtavaan tekstiin.