Tuotenumero: 3482216
myFirst Make 3D pen
3D-kynän aloituspaketti antaa 3–12-vuotiaille lapsille mahdollisuuden herättää piirustukset eloon 0.9 mm matalalämpöisellä PCL-filamentilla, langattomalla USB-latauksella ja kosketusturvallisella rakenteella.
myFirst Make 3D pen on tehty nuorille tekijöille helppokäyttöisillä säätimillä ja nopealla jähmettymisellä hauskaa, vuorovaikutteista 3D-taidetta ja oppimista varten. Lämpö pysyy laitteen sisällä, ja tarttumaton filamentti on helppo puhdistaa pois vaivattomaan luovuuteen.
- Langaton käyttö sisäänrakennetulla akulla ja USB-latauksella
- Matalalämpöinen filamentti jähmettyy nopeasti
- Tarttumaton materiaali helpompaan puhdistukseen
- Turvallinen ulkopinta, joka pysyy viileänä kosketettaessa
- Lapsiystävällinen, vaaraton PCL-filamenttimateriaali
Suunniteltu sytyttämään mielikuvitus ja auttamaan nuoria mieliä tutkimaan käytännönläheistä 3D-luomista itsevarmasti.
38,52 €
30,69 € Ilman arvonlisäveroa
Edullisin toimitus (yksityisasiakkaat) 6,99 €
Tukkurilla, 3-6 arkipäivää toimitukseen
3D Art for Young Creators
Our 3D Pen starter kit lets kids aged 3 to 12 bring their drawings to life, exploring the magic of 3D creation.
Imagination Unleashed
Specially designed for young creators, this 3D Pen allows them to turn their ideas into three-dimensional masterpieces.
User-Friendly and Safe
With easy-to-use controls and a safe design, this 3D pen offers a creative outlet that's perfect for young minds, sparking their creativity and artistic skills.
Fun and Interactive
Watch as they craft and construct with ease, all while having a blast and learning in an interactive way.
Wireless Convenience
Features an inbuilt battery with USB charging, eliminating the need for wires, ensuring easy usage and movement.
Rapid Solidification
Utilizes low-heat filament for fast solidification, with non-adhesive material that is easy to clean off.
Safe to Touch
The device's heat doesn't transfer to the exterior, ensuring the child's safety. The filament is made from non-harmful PCL materials.
Bring Your Kid's Drawings to Life!
myFirst 3dPen Make is designed to add joy to your child’s learning process. After all, drawing is the building block for learning new complex concepts. Journey with us as we build big minds together!
Safe to Touch
Safety first, folks! With the awesome myFirst 3dPen Make, you don't have to worry about little hands getting burnt because the heat stays on the inside.
Plus, the filaments are made from kid-friendly PCL materials, so they're totally safe to touch. Fun and worry-free creativity all the way!
Operate Wirelessly
myFirst 3dPen Make has a built-in battery and charges via USB, so no pesky wires to deal with while you kids are getting creative. Super convenient, right?
Rapid Solidification
Get this: myFirst 3dPen Make uses specially made low-heat filament that solidifies super fast! And the best part? The material is non-adhesive, so cleaning up is a breeze. Say goodbye to sticky messes and hello to hassle-free creativity!
More About PCL Filaments
Get ready to dive into a rainbow of creativity! You can easily find multi-colored filaments to bring your ideas to life. And guess what? The filaments are made of Polycaprolactone (PCL), a biodegradable polyester that's super easy to work with.
With a melting point of around 60°C, it's soft at room temperature, giving you endless possibilities for your projects!
Our 3D Pen starter kit lets kids aged 3 to 12 bring their drawings to life, exploring the magic of 3D creation.
Imagination Unleashed
Specially designed for young creators, this 3D Pen allows them to turn their ideas into three-dimensional masterpieces.
User-Friendly and Safe
With easy-to-use controls and a safe design, this 3D pen offers a creative outlet that's perfect for young minds, sparking their creativity and artistic skills.
Fun and Interactive
Watch as they craft and construct with ease, all while having a blast and learning in an interactive way.
Wireless Convenience
Features an inbuilt battery with USB charging, eliminating the need for wires, ensuring easy usage and movement.
Rapid Solidification
Utilizes low-heat filament for fast solidification, with non-adhesive material that is easy to clean off.
Safe to Touch
The device's heat doesn't transfer to the exterior, ensuring the child's safety. The filament is made from non-harmful PCL materials.
Bring Your Kid's Drawings to Life!
myFirst 3dPen Make is designed to add joy to your child’s learning process. After all, drawing is the building block for learning new complex concepts. Journey with us as we build big minds together!
Safe to Touch
Safety first, folks! With the awesome myFirst 3dPen Make, you don't have to worry about little hands getting burnt because the heat stays on the inside.
Plus, the filaments are made from kid-friendly PCL materials, so they're totally safe to touch. Fun and worry-free creativity all the way!
Operate Wirelessly
myFirst 3dPen Make has a built-in battery and charges via USB, so no pesky wires to deal with while you kids are getting creative. Super convenient, right?
Rapid Solidification
Get this: myFirst 3dPen Make uses specially made low-heat filament that solidifies super fast! And the best part? The material is non-adhesive, so cleaning up is a breeze. Say goodbye to sticky messes and hello to hassle-free creativity!
More About PCL Filaments
Get ready to dive into a rainbow of creativity! You can easily find multi-colored filaments to bring your ideas to life. And guess what? The filaments are made of Polycaprolactone (PCL), a biodegradable polyester that's super easy to work with.
With a melting point of around 60°C, it's soft at room temperature, giving you endless possibilities for your projects!
Valmistaja
Tuotenumero
3482216
Malli
FP3304SA-BE01
Ean
850031616257
Valmistajan kotisivuille
Tuotekuvaus
myFirst 3dPen Make - 3D-tulostinkynä
Tulostimen tyyppi
3D-tulostinkynä - FDM/FFF
Koko tai muoto
Kannettava
Paino
46 g
Tuetut rakennusmateriaalit
Polycaprolactone (PCL)
Tulostimen ominaisuudet
Adjustable temperature, adjustable molding speed, built-in rechargeable battery
Kotelon väri
Sininen
Ulkomitat (PxSxK)
14.2 cm x 2.9 cm x 2.6 cm
Yleistä
Tulostimen tyyppi
3D-tulostinkynä
Tekniikka
Fused Deposition Modeling (FDM)/Fused Filament Fabrication (FFF)
Kotelon väri
Sininen
Tulostin
Tulostimen ominaisuudet
Adjustable temperature, adjustable molding speed, built-in rechargeable battery
Mediakäsittely
Tuetut rakennusmateriaalit
Polycaprolactone (PCL)
Suulakkeen halkaisija
0.9 mm
Säikeen halkaisija
1.75 mm
Muuta
Sisältyvät lisävarusteet
Templates, 2 stickers, thermoplastic sheet
Sisältyvät kaapelit
1 x micro-USB-latauskaapeli
Sisältyvät tarvikkeet
1 x PCL filament (light pink)
1 x PCL filament (musta)
1 x PCL filament (sininen)
1 x PCL filament (light blue)
1 x PCL filament (keltainen)
1 x PCL filament (punainen)
1 x PCL filament (light green)
1 x PCL filament (vihreä)
1 x PCL filament (purppuranpunainen)
1 x PCL filament (musta)
1 x PCL filament (sininen)
1 x PCL filament (light blue)
1 x PCL filament (keltainen)
1 x PCL filament (punainen)
1 x PCL filament (light green)
1 x PCL filament (vihreä)
1 x PCL filament (purppuranpunainen)
Virransyöttö
Virtalähde
Virtalähde (ei mukana)
Mitat & paino
Leveys
14.2 cm
Syvyys
2.9 cm
Korkeus
2.6 cm
Paino
46 g
Edellä mainitut tiedot/tekniset tiedot ovat suuntaa-antavia ja valmistaja voi ilman varoitusta muuttaa niitä. Pidätämme oikeuden painovirheisiin ja ohjeellisiin kuviin. Jotkin tekstit voivat olla automaattisesti luotuja tai konekäännettyjä, mikä voi johtaa harhaanjohtavaan tekstiin.