Alupex-järjestelmät - sivu 20

Raxofix Adapter with SC-Contur- silicium bronze- press connection, R-threadd: 25, R: 34

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Henco 32 x 1 x 32 mm PVDF puristushaara vesi-, lämmitys- ja jäähdytysasennuksiin. Max. 16 bar.

Henco 63 x 50 x 63 mm PVDF puristushaara vesi-, lämmitys- ja jäähdytysasennuksiin. Max. 16 bar.

Geberit Mepla adapter union with female thread: d=16mm, Rp=1/2, G=3/4

Henco 50 mm x 112 PVDF puristus suora naarasadapteri vesi-, lämmitys- ja jäähdytysasennuksiin. Max. 16 bar.

Henco 16 mm x 12 PVDF puristus suora naarasadapteri vesi-, lämmitys- ja jäähdytysasennuksiin. Max. 16 bar.

Henco 50 x 32 mm PVDF puristusliitin pienennetty veden-, lämmityksen- ja jäähdytyksen asennuksille. Max. 16 bar.

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Press coupling for DHW and radiator systems. PPSU plastic with stainless steel/aluminum press cap, guaranteed leaking if not pressed. Calibration-free. Only to be used with Uponor MLC tubes and with Uponor approved pressing tools.

Geberit Mepla supistin: d=26mm, d1=16mm

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 16, R: 34

Geberit Mepla bend adapter 90° with female thread: d=16mm, Rp=1/2

Geberit Mepla T-liitin, pienennetty: d=26mm, d1=16mm, d2=26mm

Geberit Mepla adapter union with female thread: d=26mm, Rp=3/4, G=1

Used with Roth alu-laserplus pipe and Roth tools

Brass Press Coupling with a corrosion-resistant surface with stainless steel press cap for DHW and radiator systems, stop ring, pressure indicator, color code, guaranteed leaking if not pressed. Calibration-free. Cylindrical external thread according to EN 10226-1 for packing.Only to be used with Uponor MLC, Uni Pipe Plus and Metallic Pipe Plus pipes and with Uponor approved press tool.

Prestee PPSU Uponor 20 mm.

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 20, R: 34

Uponor 1070510 putkiliitin Hanasovitin

Press coupling Uponor with gasket sleeve/sleeve 16X3/4

Raxofix Adapter with SC-Contur- silicium bronze- press connection, Rp-threadd: 25, Rp: 34

Raxofix Adapter with SC-Contur- silicium bronze- press connection, R-threadd: 20, R: 34

Henco putkisuoristin 16 mm alu-pexille