Alupex-järjestelmät - sivu 7

Henco 32 x 20 x 26 mm PVDF puristusliitin vesijohto-, lämmitys- ja jäähdytysasennuksiin. Enintään 16 baaria.

Henco 26 x 26 x 26 mm PVDF-painetee vesi-, lämmitys- ja jäähdytysasennuksiin. Max. 16 bar.

Taipuisa jousi HENCO, ulkohalkaisija 16X2 mm, pituus L = 500 mm

Geberit Mepla T-liitin, pienennetty: d=26mm, d1=16mm, d2=26mm

Geberit Mepla T-piece, equal: d=50mm

Geberit Mepla bend adapter 90° with female thread: d=16mm, Rp=1/2

Geberit Mepla kyynärpää: 45°, d=32mm

Raxofix T-piece with SC-Contur- silicium bronze- press connectors, Rp-threadd1: 25, Rp: 34, d2: 25

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 40, d2: 32, d3: 40

Used with Roth alu-laserplus pipe and Roth tools

Used with Roth alu-laserplus pipe and Roth tools

Uponor 1046908 putkiliitin Kyynärpää

Putkien tukijalka Uponor yksittäinen 16-20 mm.

Geberit Mepla T-piece, reduced: d=63mm, d1=26mm, d2=63mm

Geberit Mepla T-liitin, pienennetty: d=32mm, d1=16mm, d2=32mm

Uponor 1089674 käsikäyttöinen putkenleikkuutyökalu Putkileikkuri

Henco 40 x 40 mm PVDF puristuskyynärpää 90° vesi-, lämmitys- ja jäähdytysasennuksiin. Max. 16 bar.

Brass Press Coupling with a corrosion-resistant surface with stainless steel press cap for DHW and radiator systems, stop ring, pressure indicator, color code, guaranteed leaking if not pressed. Calibration-free. Cylindrical external thread according to EN 10226-1 for packing.Only to be used with Uponor MLC, Uni Pipe Plus and Metallic Pipe Plus pipes and with Uponor approved press tool.

Uponor 1070539 putkiliitin Kyynärpää

Geberit Mepla adapter union with female thread: d=26mm, Rp=3/4, G=1

Geberit Mepla adapter with female thread: d=40mm, Rp=1 1/4

Geberit Mepla bend adapter 90° with male thread: d=20mm, R=1/2

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 25, d2: 16, d3: 25

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

HENCO 26X1 VISION työntösuora naarasadapteri vesi-, lämmitys- ja jäähdytysasennuksiin, enintään 16 baaria.