D-LINE - sivu 2

8 pcs D-Line connections for cable ducts in oak colour. Lets you hide your cables in an elegant way. Custom size 22 x 22 mm.

Couplings for D-Line cable ducts in quartz circle design in a nice white finish.

Kaapelin hallintaputki, 1.1 m, valkoinen

Cable Tidy Wrap
Users simply wrap the Spiral around cables to give effective protection to cables. This versatile solution allows cables to enter or exit along the length, so making a popular option for us in tight spaces. Expands around bundles of cables up to 40mm diameter. Length 2m.

Cable Tidy Clips
Cable Tidy Clips have a low-profile design, being only 15mm width x 8mm depth – giving a smart appearance which can be ideal for tight spaces (and door frames for example). Self-adhesive PVC clips. Users can simply pull back the top cover to insert cables up to 7mm outer diameter, then release the cover to hold the cables. 20 pieces in polythene bag. Dimensions- (W) 27mm x (H) 15mm x(D) 8mm.

Cable Tidy Band
While commonly used as a reusable cable tie to secure cables to supports, this versatile hook & loop Band is.ideal for multi-purpose applications. Tested to hold up to 10kg with a 50mm overlap. Being 1.2m long enables users to cut strips to required lengths.

Cable Tidy Bases
Use Cable Tidy Bases to keep cables handy and in-reach, saving any need to pick-up fallen cables! Simply peel and stick to adhere Bases to smooth surfaces.They can hold in place cable(s), or other essentials up to 8mm diameter. Multi-purpose - use with cables, headphones, pens & pencils etc. Dimensions - 27mm diameter, 14mm high.

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Couplings for D-Line cable ducts in semi-circular design, with a fine White Finish

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

13pcs

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

Square-circular joints and ends for 22x22 mm cable duct

D-LINE Accessory Kit 22x22 Oak

Couplings for D-Line cable ducts in semi-circular design, with a fine Oak Finish

Kaapelikiinnikkeet, vihreä, keltainen, vaaleanpunainen (pakkaus sisältää 6)

2x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Equal Tee: Use to join 3 lengths of same profile
3x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Supports up to 9 kg

2x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Equal Tee: Use to join 3 lengths of same profile
3x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

Couplings for D-Line cable shells in semi-circular design in a nice black finish.

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

1x Flat Bend Clip Over - Change direction by 90º on flat surfaces
2x Internal Bend Clip Over - Join lengths around 90º inside corners
2x External Bend Clip Over - Join lengths around 90º outside corners
1x Equal Tee Clip Over - Use to join 3 lengths of same profile.
2x Coupler Smooth Fit - Join 2 lengths of same profile on flat surface.
2x End Cap Smooth Fit - Neatly finish open ends.

Cable Tidy Clips have a low-profile design, being only 15mm width x 8mm depth – giving a smart appearance which can be ideal for tight spaces (and door frames for example).

The self-adhesive cable clips are produced in UK, using a flexible PVC that makes it easy to add or remove cables.

Users can simply pull back the top cover to insert cables up to 7mm outer diameter, then release the cover to hold the cables.

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts