Geberit - sivu 12

For building drainage, For site drainage

Geberit Mepla kyynärpää: 90°, d=50mm

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Geberit 33308 viemäri-, jäte- & ilmaputken sovite

For heating systems, cooling and industry
For climate technical areas
For sprinkler systems (wet)
Not suitable for drinking water pipes

Reducer w/ plend cst d35-28 zn-pl

For sanitary facilities and industry, for heating systems, cooling and industry.

Accessories for PEH drain pipe for welding: With 2 positions. too common. and fixed point suspension

Geberit 367.055.16.1 viemäri-, jäte- & ilmaputken sovite

Geberit 21224 vesiputkien osa Letkun välikappale Hiili, Terästä 1 kpl

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Geberit 32608 viemäri-, jäte- & ilmaputken sovite

For sanitary facilities and industry, for heating systems, cooling and industry.

Geberit Pluvia roof outlet: Maximum discharge rate=9l/s

For concealed installation, For covered installation. For connection of washing machine and condensing tumble dryer

Remontteihin, muutostöihin ja uudisrakennuksiinKorkeammilla sisääntulokorkeuksilla varustetuille seinäliittimille (> 23 cm)Seinään kiinnitettävien WC-istuinten korvaamiseen avoimella säiliöllä varustetuilla lattiamalleillaGeberit AquaClean Selan liittämiseenGeberit AquaClean Meran liittämiseenAsennus valmiiksi pinnoitetulle lattialleAsennus massiivisten seinien eteen

PEH-osia hitsattavaksi käytetään jätevesiasennuksissa. Niissä on TPE-äänenvaimennus.

Geberit Mepla adapter with male thread: d=26mm, R=3/4

Geberit Mepla bend adapter 90° with male thread: d=26mm, R=3/4

For heating systems, cooling and industry.
For climate technical areas.
For sprinkler systems (wet).
Not suitable for drinking water pipes.

Huuhtelutoiminto Geberit Sigma -piilohuuhteluastioille. Piilohuuhteluastioille UP320. Etupaneelin käyttöön tarkoitettu. Piilohuuhteluastioille UP300. Käytettäväksi yhdessä Geberit Sigma -piilohuuhteluastioiden 8 cm kanssa (UP720 ja UP700).

Geberit valve body for filling valve type 333.

[617500210]