D-LINE Kaapelihyllyt, Kaapelisukat & Kaapelisiteet - sivu 2

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Couplings for D-Line cable ducts in semi-circular design, with a fine White Finish

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

1x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Cable In/Outlet: Takes cables in or out of a trunking. Use between lengths on straight runs.
1x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

13pcs

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

Square-circular joints and ends for 22x22 mm cable duct

D-LINE Accessory Kit 22x22 Oak

Couplings for D-Line cable ducts in semi-circular design, with a fine Oak Finish

2x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Equal Tee: Use to join 3 lengths of same profile
3x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

Supports up to 9 kg

2x Flat Bend: Change direction by 90 degrees on flat surfaces
2x Internal Bend: Join lengths around 90 degree inside corners
2x External Bend: Join lengths around 90 degree outside corners
2x Equal Tee: Use to join 3 lengths of same profile
3x Coupler: Join 2 lengths of same profile on flat surface
2x End Cap: Neatly finish open ends

D-Line Cable Tidy Units provide the most popular solution to contain extension sockets and cable spaghetti. The smart tech design blends with modern surroundings. 3x rear cable entry/exit slots enable cables to be routed to left-side, right-side or vertical.

Fully safety tested, and produced from electrically-safe robust ABS material with an effective click-lock lid, these Socket Enclosures sort unsightly cables and contribute to a positive Health & Safety culture.

Couplings for D-Line cable shells in semi-circular design in a nice black finish.

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts.

1x Flat Bend Clip Over - Change direction by 90º on flat surfaces
2x Internal Bend Clip Over - Join lengths around 90º inside corners
2x External Bend Clip Over - Join lengths around 90º outside corners
1x Equal Tee Clip Over - Use to join 3 lengths of same profile.
2x Coupler Smooth Fit - Join 2 lengths of same profile on flat surface.
2x End Cap Smooth Fit - Neatly finish open ends.

Cable Tidy Clips have a low-profile design, being only 15mm width x 8mm depth – giving a smart appearance which can be ideal for tight spaces (and door frames for example).

The self-adhesive cable clips are produced in UK, using a flexible PVC that makes it easy to add or remove cables.

Users can simply pull back the top cover to insert cables up to 7mm outer diameter, then release the cover to hold the cables.

Angled joint connectors for D-Line semi-circular cable ducts, set of four parts