HDMI-audiosignaalin lähetys, musta

DisplayPort,kaapeli, DisplayPort (uros) to DisplayPort (uros), 2 m, antrasiitti

HDMI-audiosignaalin lähetys

DEVIreg TM 532 is a simple electronic thermostat with 2-pole switch, for installation. The thermostats are used to control indoor floor heating systems.The thermostats have an LED indicator that shows standby periods (green light) and heating periods (red light). In addition, they have fault detection on the wiring sensor - flashing, green light - that turns off the heating if the sensor is switched off or shorted.DEVIreg TM 532 is a 15A thermostat with a built-in room sensor for controlling the desired room temperature, as well as a wiring sensorto limit the maximum floor temperature. The thermostat is used, among other things, to control direct heat via floor systems with limitation of the maximum temperature in wood floors and other heat sensitive floors. It has a dial for adjusting the room temperature with a degree scale of from 35 ° C, which refers to 5 ° C to 35 ° C. It is possible to adjust the maximum floor temperature with the potentiometer located below the front panel (default is 35 ° C).

DEVIflex TM 10T (10W / m) heating cable is typically used for underfloor heating as well as total and comfort underfloor heating for both wood floors and thin-floor structures, as well as frost protection of both metal and plastic pipes in homes, agriculture, offices, warehouses and the like.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensure a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.

DEVIreg TM Smart is a user-friendly, programmable timer thermostat, with built-in WI-FI, and through the DEVIsmart TM App, it can be controlled from anywhere and at any time. The thermostat is used for the control of electric floor heating, electric electric radiators, but also other heating elements and heat sources. The thermostat is designed for fixed installation and thanks to the specially developed 2-part construction it fits a wide range of frames, and it is also compatible with many sensors with different characteristics. DEVIreg TM Smart setup is intuitive and fast using the APP. It has open window function and energy-saving program with optimized start / end control, which ensures the desired temperature at the right time, thereby reducing heating costs.

Cable sensor NTC 15kOhm @ 25 ° C,for outdoor installation 10mDim: Ø8mm 2 x 0.75mm2Sheath: White PVC sheath,IP67, DIN 44574Temp zone:-25 ° C to 70 ° C

Liitäntäsarja cans 19-805753 suunniteltu itserajoittuville lämmityskaapeleille DEVIpipeguard / Iceguard ja hotwatt

DEVIflex TM 10T (10W / m) heating cable is typically used for underfloor heating as well as total and comfort underfloor heating for both wood floors and thin-floor structures, as well as frost protection of both metal and plastic pipes in homes, agriculture, offices, warehouses and the like.DEVIflex TM is a 360 ° fully shielded double-conductor cable of extremely high quality with a robust outer sheath (non-UV resistant). The round profile and robust construction ensure a fast, light and secure installation in many indoor floor structures and pipe protection applications.The cold lead is an installation cable with solid conductors that ensures quick installation, and the clear and visible assembly prevents accidental installation of the heating cable in the wall.

DisplayPort,kaapeli, Mini DisplayPort (uros) to HD-15 (VGA) (uros), 2 m malleihin Apple MacBook; MacBook Air; MacBook Pro

Roof Sensor - Electronic moisture and temperature sensor for DEVIreg TM 850 designed for ice and snowmelting of roofs, roof trusses, shutter gutters and the like. Roof sensor with 15m cableDEVIreg TM 850

DEVIpipeheat TM 10 is a self-limiting heating cable used primarilyantifreeze of pipes.The self-limiting function of the cable means that the power of the cable increases or decreases in relation to the ambient temperature.The heating cables can be installed inside or outside on pipes - but not in drinking water pipes.Do not use in contact with drinking water

DEVIreg TM 130 is a simple electronic 16A thermostat that can be mounted directly on the wall. The thermostats have only one button for adjusting the temperature and for switching off. In addition, it has an LED indicator that shows standby periods (green light) and heating periods (red light). The thermostats do not have cable sensor monitoring. The cable sensor is inclusive.The DEVIreg TM 130 is equipped with a cable sensor for controlling the floor temperature. The thermostat has a dial for adjusting the temperature with scale steps from 5 to 5 (which refers to switching off, 5 ° C to 45 ° C - each scale stage corresponds to about 9 ° C).

DEVIcrimp TM toDEVImat rep.- andassembly line 2 conductorheating mat• 1 piece. 0.5m DSWB 10 black2x1.0mm2 m. Screen• 6 pieces. Db. 0.51,0mm2• 4 pieces. 2.5cm shrink tubing4 / 1.6 Cows 4• 2 pcs. 7.5cm shrink tubing6 / 1.4 thin wall black• 2 pcs. 13cm shrink tubing 9/3IAKT black

New model with ball joint

DEVI TM outdoor sensor,box IP44, NTC 15 kOhm @25 ° C, box for mounting onwall 80 x 50 x 35 mm, IP44

DEVIcrimp TM toDEVIheat rep. setfor 1-conductor heating mat• 1 piece. CU cable BLW0.248ohm / m, 0.30mm K-2• 1 piece. 4cm shrink tube 6 / 1.4thin wall black• 1 piece. 10cm shrink tube 12/3MC225KT black• 1 piece. tube rupture 0.5-1.0mm2• 1 piece. 6cm Copper screen

DEVIreg TM Smart is a user-friendly, programmable timer thermostat, with built-in WI-FI, and through the DEVIsmart TM App, it can be controlled from anywhere and at any time. The thermostat is used for the control of electric floor heating, electric electric radiators, but also other heating elements and heat sources. The thermostat is designed for fixed installation and thanks to the specially developed 2-part construction it fits a wide range of frames, and it is also compatible with many sensors with different characteristics. DEVIreg TM Smart setup is intuitive and fast using the APP. It has open window function and energy-saving program with optimized start / end control, which ensures the desired temperature at the right time, thereby reducing heating costs.

DEVIreg TM 132 is a simple electronic 16A thermostat that can be mounted directly on the wall. The thermostat has only one button for adjusting the temperature and for switching off. In addition, it has an LED indicator that shows standby periods (green light) and heating periods (red light). The thermostats do not have cable sensor monitoring. The cable sensor is inclusive.The DEVIreg TM 132 is equipped with a built-in air sensor for controlling room temperature as well as a cable sensor to limit the maximum floor temperature. The primary application is control of heating via floor systems. The thermostat has a knob for adjusting the room temperature with a degree scale of up to 35 ° C (which refers from the off, 5 ° C to 35 ° C). It is possible to adjust the maximum floor temperature with the potentiometer located below the front panel (default is 35 ° C).

10M prof. Cable set 3G1,5 H07RN-F. For outdoor use.

25M prof. Cable set 3G1,5 H07RN-F. For outdoor use.

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

DEVImat TM 100T (100W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.