ESBE draught regulator ATA212 35-95°C G3/4The series ATA200 is a control device for regulating the temperature of solid fuel boilers. The thermostatic control head senses the temperature and through a lever and chain adjusts the position of the air vent, thereby regulating the combustion air supply to the boiler. The draught regulator is fully adjustable within the ranges of 35-95°C and 60-95°C. The draught regulator is connected directly to the boiler waterway through a threaded immersion pocket.

ESBE load valve VTC511 25-9 RP1 60°CThe series VTC500 is a thermic valve used for solid fuel boilers up to 150 kW. The load valve makes sure that the boiler gets up to a high combustion temperature so as to ensure the lowest possible emissions. Above all, the valves make sure that the return temperature to the boiler is kept high and guaranteed over the entire combustion cycle which enables a higher level of boiler efficiency, reduced tarring and increased life span of the boiler

• Maximum working pressure: 3.0 bar.• Vessels in accordance with EN13831.• Suitable for systems with a maximum flow temperature of 120 °C.• Maximum temperature diaphragm: 70 °C.• Suitable for addition of glycol-based anti-freeze up to 50%.• In accordance with Pressure Equipment Directive 2014/68/EU.

• Type RM 8 (8 l/min).• With filter, non-return valve, 6 bar manometer, 1/2 hose fitting and worm drive hose clip with 3/4 locking nut.• Suitable for primary pressure up to 10 bar.• Regulates between 0.4 - 3.0 bar (1.5 bar factory set).• Maximum working temperature: 70 °C.• Maximum glycol content: 50%.

Metalbestos elbow 30°

ESBE rotary mixing valve VRG131 20-6.3 RP 3/4Series VRG130 are 3-way valves suitable for mixing or diverting operation. The valves are made of high-performing brass allowing use in heating and cooling installations. The VRG series is available in DN15-50 and comes with different types of connections to suit most pipe dimensions. The valve is perfectly combined with ESBE actuators and controllers.

Type MB2, 94 x 113 x 26 mm.Tank capacity: 8 - 25 liter

• Suitable for addition of glycol-based anti-freeze up to 50%.• With two safety valves

• Material: DD12., zinc plated.• Cubex R expansion vessels have to be installed with the system connector facing downwards.• Connection to the clench ring of the vessel.• Connection of the vessel to the mounting bracket by one M 8 x 45 bolt.

ESBE rotary mixing valve VRG131 25-10 RP 1Series VRG130 are 3-way valves suitable for mixing or diverting operation. The valves are made of high-performing brass allowing use in heating and cooling installations. The VRG series is available in DN15-50 and comes with different types of connections to suit most pipe dimensions. The valve is perfectly combined with ESBE actuators and controllers.

Insulation for puffer tank PS300EPS insulating mantle: fire category B1 according to DIN 4102.Thermal conductivity = 0.032 W/(m.K) according to DIN EN 12667.

Insulation for puffer tank PS500EPS insulating mantle: fire category B1 according to DIN 4102.Thermal conductivity = 0.032 W/(m.K) according to DIN EN 12667.

• Maximum working pressure: 3.0 bar.• Vessels in accordance with EN13831.• Suitable for systems with a maximum flow temperature of 120 °C.• Maximum temperature diaphragm: 70 °C.• Suitable for addition of glycol-based anti-freeze up to 50%.• In accordance with Pressure Equipment Directive 2014/68/EU.

Metalbestos raincap

Insulation for puffer tank PS750EPS insulating mantle: fire category B1 according to DIN 4102.Thermal conductivity = 0.032 W/(m.K) according to DIN EN 12667.

Laddomat thermostat cartridge 63°C

Maximum working pressure: 10 bar.Maximum working temperature (design): 130 °C.Suitable for addition of glycol-based anti-freeze up to 50%.

Made in black SBR rubber.

Insulation for puffer tank PS500EPS insulating mantle: fire category B1 according to DIN 4102.Thermal conductivity = 0.032 W/(m.K) according to DIN EN 12667.