Lämpöpumput - sivu 2

A smart solution specially designed for the harsh Nordic climate to keep your home more clean, comfortable and inviting. The smart Flagship now features nanoe™ X technology that takes advantage of hydroxyl radicals. With advanced control options, top-level performance, a stylish design and intelligent features, the Flagship is designed to make your home comfortable, cleaner and a nice place to be, even in extreme conditions.

SCOP of 5.69. A third-party test at the Danish Technological Institute (DTI) showed that the HZ35XKE has an impressively high SCOP of 5.3. This means great energy efficiency.

Please be aware that the heat pump must be installed by a KMO authorized installer, otherwise the warranty will be void.

Wall-mounted module with Smart. Design. in WHITE for the construction of individual facilities.

Compress 7000i AWE17 includes:

• HPC400 regulation
• electric heater
• expansion tank
• circulation pump for the heat pump
  vents
• IP/TCP module to connect the module to the free app Bosch ProControl.

CS AWE17 backup module can be combined with CS 7000i AW 13 and 17 kW air/water outdoor unit.

The new super compact CZ, with built-in Wi-Fi control, is perfect for smaller spaces such as garages, summer houses or sheds. It measures just 779mm in width - perfect for limited installation spaces or over the door.

Please note that the heat pump must be installed by a KMO authorized installer, otherwise the warranty will be void.

MAT PRO 12 – Efficient heat pump with stylish matte black design

The MAT PRO series are wall-mounted air-to-air heat pumps from Andersen Electric that combine high performance with an elegant, modern design. The indoor unit is like new with a matte white surface that fits discreetly into any home decor.

The MAT PRO series is developed for the Nordic climate and works down to -25°C, making the heat pumps ideal for use in Scandinavia – all year round.

With a low sound level of down to 19 dB, energy class A+++, and the option of Wi-Fi control via app, the MAT PRO 12 is both comfortable, user-friendly and energy-saving.

Perfect for homes, summer houses or office environments where both efficient heating and cooling are desired – with style.

Please be aware that the heat pump must be installed by a KMO authorized installer, otherwise the warranty will be void.

MAT PRO 12 – Efficient heat pump with stylish matte design

The MAT PRO series are wall-mounted air-to-air heat pumps from Andersen Electric that combine high performance with an elegant, modern design. The indoor unit is like new with a matte white surface that fits discreetly into any home decor.

The MAT PRO series is developed for the Nordic climate and works down to -25°C, making the heat pumps ideal for use in Scandinavia – all year round.

With a low sound level of down to 19 dB, energy class A+++, and the option of Wi-Fi control via app, the MAT PRO 12 is both comfortable, user-friendly and energy-saving.

Perfect for homes, summer houses or office environments where both efficient heating and cooling are desired – with style.

Please be aware that the heat pump must be installed by a KMO authorized installer, otherwise the warranty will be void.

MAT PRO 9 – Efficient heat pump with stylish matte black design

The MAT PRO series are wall-mounted air-to-air heat pumps from Andersen Electric that combine high performance with an elegant, modern design. The indoor unit is like new with a matte white surface that fits discreetly into any home decor.

The MAT PRO series is developed for the Nordic climate and works down to -25°C, making the heat pumps ideal for use in Scandinavia, year-round.

With an impressively low sound level of down to 19 dB, energy class A+++, and the option of Wi-Fi control via app, the MAT PRO 9 is both comfortable, user-friendly and energy-saving.

Perfect for homes, summer houses or office environments where both efficient heating and cooling are desired – with style.

Please be aware that the heat pump must be installed by a KMO authorized installer, otherwise the warranty will be void.

A smart solution specially designed for the harsh Nordic climate to keep your home more clean, comfortable and inviting. The smart Flagship now features nanoe™ X technology that takes advantage of hydroxyl radicals. With advanced control options, top-level performance, a stylish design and intelligent features, the Flagship is designed to make your home comfortable, cleaner and a nice place to be, even in extreme conditions.

SCOP of 5.69. A third-party test at the Danish Technological Institute (DTI) showed that the HZ25XKE has an impressively high SCOP of 5.69. This means great energy efficiency.

Please be aware that the heat pump must be installed by a KMO authorized installer, otherwise the warranty will be void.

Thanks to 5 world patents and new technology, you are guaranteed a heat pump that reaches completely new heights in terms of energy efficiency. The air/water heat pump is tested by the Danish Technological Institute - this is your assurance of quality. At the same time, you get a heat pump that automatically adapts to the weather conditions, which provides optimal comfort and low energy consumption.

• 5 world patents
• Lower heating bill due to a high SCOP value
• Save electricity with inverter technology, which ensures a heating solution that adapts to your needs
• Tested at the Technological Institute
• Suitable for new and older houses
• Suitable as a free-standing solution or combined with another heating system (hybrid solution)
• Saves space due to compact dimensions
• With accessories, also for heating the pool
• Attractive design

METRO Delta is the future's quiet alternative to an air-water heat pump. The small, wall-mounted heat pump utilizes heat energy from liquid, e.g. brine from the thermonet or PVT panels, to produce hot water, space heating and passive cooling for the home. The heat pump has a capacity of 4.7 kW* and is therefore perfectly suited for smaller homes – terraced houses, homes for the elderly, etc. However, its small size also makes it ideal for converting from gas in small households, as it is not much larger than the stripped-down gas boiler.

The heat pump is powered by R290 (propane), a natural refrigerant with a very low climate impact. R290 has a very small GWP (Global Warming Potential) of 3, which means that each kg of refrigerant only corresponds to 3 kg of CO₂ – in comparison with e.g. R32, which has a GWP of 675. With an impressive SCOP value of 6.2*, it produces far more energy than it consumes. It has a refrigerant charge of only 150 g, and can thus be installed in existing buildings without special safety measures.

METRO Delta is designed for use with thermonet (common ground heating), traditional ground heating or roof-mounted PVT panels. METRO Delta can handle temperatures as low as -15 °C and as high as 50 °C, and can deliver up to 70 °C in flow temperature.

METRO Delta is designed and produced in Denmark. This helps to ensure high product quality and gives you access to our skilled, Danish-speaking service team.

*At Brine 5 °C, heat 35 °C.

Vibration-damping rubber feet for heat pumps. Str. 400 x 95 x 130 mm (LxHxW). Set of 2 pcs. With mounting rail and fastening bolts.

The Midea all-season window seal is a custom-made accessory for the Midea PortaSplit.

ELL Cover – Replaceable cover that fits ELL Front.

ELL Cover is designed for easy replacement, so you can quickly adapt your product to your needs. Small magnets on the back of the cover ensure quick and trouble-free installation. The magnets ensure that the cover clicks into place easily and can be removed just as easily when you want to change it.

Vibration-damping rubber feet for heat pumps. Str. 600 X 95 X 130 mm (LxHxW). Set of 2 pcs. With mounting rail and fastening bolts.

Vibration-damping riser for rubber feet. Fits rubber feet from Andersen Electric in size 600 X 95 X 180 mm. Str. 600 X 130 X 190 mm (LxHxW). Set of 2 pcs. Simple installation.

ELL Cover – Replaceable cover that fits ELL Front.

ELL Cover is designed for easy replacement, so you can quickly adapt your product to your needs. Small magnets on the back of the cover ensure quick and trouble-free installation. The magnets ensure that the cover clicks into place easily and can be removed just as easily when you want to change it.

ELL Cover – Replaceable cover that fits ELL Front.

ELL Cover is designed for easy replacement, so you can quickly adapt your product to your needs. Small magnets on the back of the cover ensure quick and trouble-free installation. The magnets ensure that the cover clicks into place easily and can be removed just as easily when you want to change it.

Vibration-damping rubber feet for heat pumps. Str. 1000 X 95 X 180 mm (LxHxW). Set of 2 pcs. With mounting rail and fastening bolts.

Vibration-damping riser for rubber feet. Fits rubber feet from Andersen Electric in size 1000 X 95 X 180 mm. Str. 1000 X 130 X 190 mm (LxHxW). Set of 2 pcs. Simple installation.

180 liter stainless hot water tank developed for use with Bosch ground and air to water heat pumps. The hot water tank is white lacquered metal front and side plates with the rounded corners give the well-known Bosch heat pump design.

The Bosch VVB SWDP 200 O C has the same physical dimensions and design as the Bosch Compress 7001i LW ground source heat pump with metal front. The physical dimensions are as follows: width 600 mm x depth 610 mm x height 1,200 mm.

Pakkassuojaventtiili Cimberio CIM 138 on lämpöpumpputarvike pakkassuojaukseen lämpöpumppuasennuksissa.

Venttiili on listattu käytettäväksi lämpöpumppujen kanssa ja tarjoaa erillisen komponentin järjestelmiin, joissa pakkassuojaus on tarpeen.

Tiivis valinta pakkassuojaustoiminnallisuuden lisäämiseen lämpöpumppukokoonpanoon.

ELL Cover – Replaceable cover that fits ELL Front.

ELL Cover is designed for easy replacement, so you can quickly adapt your product to your needs. Small magnets on the back of the cover ensure quick and trouble-free installation. The magnets ensure that the cover clicks into place easily and can be removed just as easily when you want to change it.

ELL Cover – Replaceable cover that fits ELL Front.

ELL Cover is designed for easy replacement, so you can quickly adapt your product to your needs. Small magnets on the back of the cover ensure quick and trouble-free installation. The magnets ensure that the cover clicks into place easily and can be removed just as easily when you want to change it.

ELL Cover – Replaceable cover that fits ELL Front.

ELL Cover is designed for easy replacement, so you can quickly adapt your product to your needs. Small magnets on the back of the cover ensure quick and trouble-free installation. The magnets ensure that the cover clicks into place easily and can be removed just as easily when you want to change it.