Lattialämmitys - sivu 4

Pettinaroli suoraan johdotettu huonetermostaatti ilman näyttöä. 24V

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Salus Shunt GVS is equipped with a full electronic circulation pump, with a capacity for supplying 1 - 16 floor heating circuits.

Täydellinen putkisto, sisään- ja ulostulot, mukaan lukien kiinnikkeet, 20 mm liittimet ja päätökset. 5 ulostuloa.

Niille, jotka haluavat laajentaa langattoman signaalin kantamaa.

Täydellinen putkisto, sisään- ja ulostulot, mukaan lukien kiinnikkeet, 20 mm liittimet ja päätökset. 2 ulostuloa.

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Floorheating with high energy efficiency

Peruspaketti Uponor pro

Quantum SQ610 is a new smart room thermostat from SALUS. The room thermostat look is light and simple in a smart thin design. The room thermostat must be connected to 230V. The SQ610 can be used freely for either wired systems or connected wirelessly to a SALUS floor heating system / SALUS Smart Home system. When connected through SALUS Smart Home it is possible to monitor and change the thermostat settings from either PC, Smart Phone or tablet. The SALUS Quantum SQ610 offers the opportunity to increase comfort and reduce energy consumption.

Pump with 6 m lifting height and dimensions 180 mm.The pump is A + rated, that is, power consumption is minimal.

Uponor Fluvia T PUSH 12 WL-G pumppuyksikkö.

Fittting for Roth pipe and manifold

for one jig.

Työkalu putkiklipsien kiinnittämiseen lattialämmitysputkiin eristyksen päällä. Käytetään Unite-putkiklipsien kanssa.

Used on Roth manifold

Danfoss puristusliittimet. Kytkennät, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15 ja moniputki CFD.

Danfoss FHM-C2 valmiiksi koottu lattialämmitysjae säätelemään virtauslämpötilaa vesikiertoisissa lattialämmitysjärjestelmissä. Danfoss Icon -lattialämmityksen ohjaus- ja laajennusmoduulin avulla virtauslämpötilaa voidaan säätää elektronisesti kotisi lämmitystarpeen mukaan.

Salus Quantum analog smart dial thermostat for UFH.Zigbee communication. Battery 2xAAAA.11 mm deep from wall. Can be paired with CO10RF (KL08RF) & UGE600 Gateway

For fix of pipe in concrete

DEVIreg TM Touch is an intuitive, programmable timer thermostat for controlling electric floor heating elements. The thermostat is only intended for fixed installation, and thanks to the specially developed 2-part construction it fits a wide range of frames, and it is also compatible with many sensors with other characteristics. Setting up DEVIreg TM Touch is quick and intuitive with the help of the built-in guide. It has an energy-saving program, including optimal start / end control, which ensures the desired temperature at the right time and thus reduces heating costs.

Tool for sparepart

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The inlet- and return- connection is 1 ”thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 ”for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

Fittting for Roth pipe and manifold

Complete shunt