Lattialämmitys - sivu 7

Temperature - floor [°C]: 4 - 45, Temperature - room [°C]: 4 - 35, Display type: LED, Application: Floor heating

DEVIpipeheat 10 V3, 2m Self limiting with Danish plug

DEVIreg TM Touch is an intuitive, programmable timer thermostat for controlling electric floor heating elements. The thermostat is only intended for fixed installation, and thanks to the specially developed 2-part construction it fits a wide range of frames, and it is also compatible with many sensors with other characteristics. Setting up DEVIreg TM Touch is quick and intuitive with the help of the built-in guide. It has an energy-saving program, including optimal start / end control, which ensures the desired temperature at the right time and thus reduces heating costs.

Danfoss Icon2™ Main Controller for underfloor heating control. Basic model, 24V, 15 circuits. With pre-installed TWA conversion module and DK adapter with ground. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Danfoss BasicPlus ja BasicPlus2 huonetermostaatit on suunniteltu itsenäisiksi termostaateiksi, jotka ovat suoraan yhteydessä 230V toimilaiteeseen. Termostaatteja on saatavilla versioina, joissa on säädin, näyttö tai ohjelmoitava näyttö.

Used between floorheating pipe and Roth manifold.

Sovittimet toimilaitteille. Asennus toimilaitteiden kiinnittämiseksi Danfoss RAV/FJVR-venttiileihin.

Adapters for actuators. For mounting actuators on Tesa, Frese, Honeywell, Cazzaniga, Wavin manifolds

Fittting for Roth pipe and manifold

Venttiili k7037 - palautus - valmis

Laajennus 1 tuuman putkistoon, 2 piiriä. 1 tuuman putkisto, syöttö- ja paluupalkki, sisältää liittimen. Sisältää 20/16 liittimet.

Täydellinen putkisto, sisään- ja ulostulot, mukaan lukien kiinnikkeet, 20 mm liittimet ja päätökset. 5 ulostuloa.

Esikootut lineaariset kollektorit mikrometrisellä ohjauksella, termostaattivaihtoehdolla tai sähköisellä ohjauksella paluuputkille. Puristusliittimet. Ilman liittimiä. 2 ulostuloa.

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Complete shunt

Uponor Smatrix -anturi lattia/kauko-ohjain S-1XX

Uponor-termostaatti T-23 230 V.

Complete shunt

Uponor Smatrix Wave -ohjain Pulse X-265 6X on langaton lattialämmitys-/viilennysjärjestelmän ohjain, joka tukee jopa neljää ohjainta Uponor Smatrix Wave Pulse -järjestelmässä. Se ei ole yhteensopiva Uponor Smatrix Wave -ohjausyksiköiden X-163/X-165 6X kanssa. Toiminnot: Automaattinen tasapainotuselektroniikka tukee enintään kuutta huonetermostaattia ja kahdeksaa toimilaitetta (24V). Lämmitys-/viilennystoiminto kytketään kosketustunnistimen syöttöön tai yleiseen TH-pumppureleen kautta. Kattaa lattiaviilennyksen/-lämmityksen ja kattojen viilentämisen hallinnan. Uponor Smatrix com Pulse R-208 liitettävyys RJ45-kaapelin kautta. Vaihtoehdot: Ohjaus ja konfigurointi Uponor Smatrix Pulse -sovelluksen, etähallinnan ja älykodin integraation avulla käyttämällä Uponor SmatrixCom Pulse R-208:a lisää kuusi kanavaa ja toimilaiteulostuloa (24V) käyttämällä Uponor Smatrix Wave slave module Pulse M-262 6X kaappiin tai seinälle asennettava (DIN-kisko tai ruuvireiät). Sisältö: Uponor Smatrix Wave controller Pulse X-265 6X antenni ensimmäiset ohjeet turvaohjeet kiinnitystarvikkeet yhdenmukaisuus: CE / EAC käyttöjännite: 230V / 50Hz enimmäisteho syöttölaitetta kohden: 24VAC / 0.2A suojausluokka: Luokka II IP20 väri: valkoinen

Rinnakkaiskytketty shuntti sisältäen UPM3-pumpun 15/70.

Roth langaton säätö Minishuntille, tyyppi Plus

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Käytä jokaista 5 metrin putkipituutta kohti.