Product: LC-Click-N 140 (91001) white. Motion sensor with a detection range of 140 °. Sensor head can be turned on two levels. Range can be adjusted by rotating the sensor head. Masking terminals for precise shielding of sources of interference or to limit the detection area. Adjustable lux value and the delay time with potentiometer on the sensor's underside. Wall mounting, Simple installation. Application examples: monitoring of narrow grounds, driveways. Power supply voltage: 230V ~ ± 10%. Detection range: 140 ° + 360 °. Range (approximately) in m :. max. 12 m by moving across the detection area (tangential). Protection: IP44 / Class II / CE. Dimensions: L 103 x W 78 x H 78 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Channel 1 (light control). Max Load: 1000 W, power factor measure = 1, Time settings: 4 sec. - 10 min. Brightness Value: 2-2500 Lux sec. - 10 min. Brightness Value: 2-2500 Lux.

The DETECT ME 6 motion detector has a round black plastic finish. The sensor features IP44 protection against spray water, meaning the product is suitable for use in outdoor areas such as the garden, the garage or driveways. The product allows lights with no sensor to be switched on by motion detection, enabling poor visibility areas to be illuminated when needed and deterring unwanted visitors. The integrated twilight sensor gauges the ambient light level to ensure the light only switches on when needed. With its 360° sensor, the motion detector is ideal for mounting on the ceiling.

· Complet system with control and external light sensor· 2-wired connection of control and light sensor· 35 mm module· For installation in boards on DIN rails· Class II product – cable to light sensor can be installed as 2-wired low-voltage· Easy to programme via the Lux-button and diode

Yövalo, LED, 1 W, kylmä valkoinen valo, 8000 K, valkoinen

Occupancy detector pd3n-1c/fc

Product: IR-PD-1C (92520) Infrared remote control LUXOMAT® IR-PD-1C suitable for motion detectors LUXOMAT® PD1-M-, PD2-M-, PD4-M-, PD4-M-, PD5-M- and PD9-M. Through various programs can motion sensor to be tailored to individual requirements, even after installation. Additional features such as. autoloading in the current daylight value or the useful 2 sec.-test function can be performed with IR PD-1C. The light can be switched on or off by pressing a key. A further installation of a switch is thus not necessary. Battery Lithium CR2032 - 3 Volt (included) Range (around) m: depending on lysforholdene- cloudy or dark: 5 to 6 m direct sunshine: 2 to 3m. Dimensions: L 80 x W 60 x H 8 mm

Product: IR ADAPTOR (92726) Infrared adapter for smartphone (Android and iPhone) that can program all BEG sensors, not KNX. Remember to download the free app.

The product is included with black corner bracket (item 351-10172) and IR-user remote control for item 351-26570, 351-26572 (item number 351-25315).

· For flush mounting · Connect up to 10 Slavedetectors · Large detection range - 450 m2 · Setting of functions directly on the detector · Change settings via IR remote control · Potential free relay – high class · Protection class IP54 · Preprogrammed – ready for use

The protection cap is used to protect the sensors in e.g. sports centres, gymnasiums, walking areas.For sensors 41-262, 41-274 and 41-279

Product: CdS -T-P (92367) Twilight switch with integrated switch can be operated remotely using the IR-CdS-T (optional) - more features than the traditional operation via rotary controller programmable energy saving periods at the touch of a button thanks to the integrated kontakturIndlæsning of the current brightness Examples of application: ideal for use in entrance zones, stairwells corridors where there must always be bright. Power supply voltage: 230V ~ ± 10%. Protection: IP54 / Class II / CE Dimensions: L 47 x W 57 x H 65 mm. Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high-quality. Remote controllable: IR-CdS-T. Energy Saving: Light off Flexible adjustable (only with IR-CdS-T). Channel 1 (light control) Max Load: 2300 W, power factor measure = 1 1150 VA, power factor measure = 0.5 Brightness Value: 2-300 Lux.

Product: PD4-S-GH-P (92265) Presence detector LUXOMAT® PD4-S- GH, Slave with oval detection range and the range for mounting in fixed ceiling or PL dåse.Stort savings potential especially in large spaces and in monitoring of large surfaces. It requires only a Master of ignition of light and ventilation Possibility of detection of movement in all local segments with slaves pulse signal to the Master of detected movement. Detection of movement independent of the ambient brightness. No setting items on the Slave. Sensor and præstationsdel in a cabinet. Application examples: monitoring of warehouses and warehouse with high racks, where the mounting height is great. Power supply voltage: 230V ~ ± 10%. Detection range: 360 ° .Rækkevidde (approximately) im - across Ø 44.00 m. Protection: IP20 / Class II / CE. Dimensions: Ø 98 x H 63 mm Ambient temperature: -25 ° C to + 50 ° C. Housing: UV-resistant polycarbonate high quality Slave output Slave device: 230 V. Power consumption:> 0.5W.

Product: PD4-S-i (92254) Presence detector LUXOMAT® PD4-S, Slave and the range for recessed ceiling. Large energy savings potential especially in large spaces and in monitoring of large surfaces. It requires only a Master of ignition of light and ventilation. Possibility of detection of movement in all local segments with slaves pulse signal to the Master of detected movement. Movement Detection independent of ambient brightness sensor and præstationsdel in a cabinet. Application examples: monitoring of large redundant surfaces, for example. parking garages, gyms, warehouses, loading ramps, halls etc. Power supply voltage: 230V ~ ± 10%. Detection range: 360 °. Range (around) m: - sitting Ø 6.40 m - across Ø 24.00 m - head Ø 8.00 m Protection: IP20 / Class II / CE. Dimensions: Ø 97 x H 103 mm. Ambient temperature: -25 ° C to + 50 ° C Housing: UV-resistant polycarbonate high-quality. Pulse function: Pulse spacing 2 sec. or 9 sec. Slave output Slave device: 230 V. Power consumption:> 0.5W

Outdoor motion detector 16 m, 300°, white. The product is included with white corner bracket (item 351-10170) and IR-user remote control for item 351-26570, 351-26572 (item number 351-25315).

IR-dongle for smartphone. Transfer data from smartphone to detector. Fit to the jack-stick.

· Used with presence detector 41-700, 41-701, 41-720 and 41-721 · Used with motion detector 41-770, 41-771, 41-774 og 41-775 · Bracket for wall mounting included

· 35 mm module · Designed for fitting in boards on DIN rails · Class II - 2-wired connection of control and light sensor · Easy to set via the Lux-button and diode

· 230 V connection· Detection angle 180°• Detection range up to 11 meters (antracit)• Time delay up to 30 mins.• Setting of lux, time and meters below cover• Facility to block detection range

· White· 230 V connection· Detection angle 180°· Detection range up to 14 meters (white)· Time delay up to 30 mins.· Setting of lux, time and meters below cover· Facility to block detection range

· 230 V AC· For flush mounting· Connect up to 10 slave-detectors type 41-702· Large detections range - up to 450 m2· Small movements in a range of 9 m2· Setting of functions directly on the detector· Change settings via IR remote control· IP 54 protection class

· Surface mounting on ceiling up to 8 m · Connect up to 10 Slave-detectors 41-773 · Large detection range - up to 800 m2 · Suitable for sports halls, gymnasiums and production facilities · Settings via IR remote control · Protection class IP 54

Presence detector, surface mounted, 360°, slave• 230 V AC• For mounting on the ceiling• Connect up to 10 slave-detectors to Master type 41-701• Large detections range - up to 450 m2• Small movements in a range of 9 m2• Setting of sensitivity on the detector• IP 54 protection class – can be installed in premises where this is necessary – e.g. in changing rooms.

· 230 V AC· For flush mounting in a PL/Euro socket· Connect up to 10 slave-detectors to Master type 41-700· Large detections range - up to 450 m2· Small movements in a range of 9 m2· Setting of sensitivity on the detector· IP 54 protection class – can be installed in premises where this is necessary – e.g. in changing rooms.

· 230 V AC· 360° detection area· Covers 140 m2· Small motion sensor within 9 m2· Manual operation possible

· For the danish switch system· 230 V AC· Detection area 180°/20 m2· Can be combined with push buttons· Connect up to 10 Slave detectors· Constant ON for 2 hours· Settings for time and lux are hidden