Liitostarvikkeet putkille - sivu 27

STAD-tasapainotusventtiili tarjoaa tarkkaa hydronista suorituskykyä vaikuttavassa valikoimassa sovelluksia. Se sopii ihanteellisesti käytettäväksi lämmitys- ja jäähdytysjärjestelmissä sekä käyttövesijärjestelmissä toissijaisella puolella.

Danfoss insulation cap for AB-QM DN20Tailpieces, union connections etc. for AB-QM

Danfoss insulation cap for AB-QM DN32Tailpieces, union connections etc. for AB-QM

Danfoss insulation cap for AB-QM DN10Tailpieces, union connections etc. for AB-QM

QT is a self-acting thermostatically controlled actuator developed for use as return temperature control in 1-string heating systems. QT is intended to be used with the dynamic balancing and control valve AB-QM 4.0. AB-QM 4.0 together with QT is a complete 1-string solution: AB-QT.Main data:• Setting range: 35–50°C, 45–60°C, 65–85°CDeveloped for AB-QM 4.0 DN 15-20• External surface sensor that is easy to install

SKINTOP® MS-M BRUSH, messinkinen kaapelinippa kaksinkertaisella lamellitiivisteellä, nopeampi, vähävastuksinen 360° näyttökontakti, helppo asentaa.

Danfoss AB-QM is a Pressure Independent Control Valve (PICV) that combines high accuracy with market-leading ease of use. AB-QM's design is fully geared to ensure that your projects meet your schedule and budget, while providing the most efficient HVAC system. Pressure-independent valves are control valves that have an automatic balancing function. A built-in pressure regulator maintains a constant differential pressure across the control valve, ensuring full authority and automatic flow limitation. By combining two functions in one, regulation and automatic water balance, PICVs from Danfoss offer a cost-effective solution to the challenges that far-sighted designers of HVAC systems face.

BROEN - BALLOFIX F/M 1/4 KAHVALLA, KROMI

TA 500 Globo ruostumattomasta teräspallosta valmistettu monitoiminen sulkuventtiili, jota käytetään juomaveden sovelluksissa. Runko on valmistettu korroosionkestävästä messinkiseoksesta. Pallonventtiilissä on vankka kahva helppoa käyttöä varten.

BROEN BALLOMAX DN100 LIIKELAITTEEN KANSI/KANSI

VSH XPress venttiili, galvanoitu, paine/paine, korkea

Kaksitoista Spirotop-messinkiä / TPX / 180 °C / 10 baaria

TA Zeparo ZUT 1/2 ilmanpoistinventtiili.

Danfoss 003Z4001 putkiliitin

Danfoss 003Z4043 putkiliitin

ASV-PV is a automatic balancing valve that maintains constant differential pressure across the riser. ASV-PV can be set to control the differential pressure in several Dp setting ranges: Between 5 to 25 kPa (10 kPa factory setting), 20 to 40 kPa (30 kPa), 35 to 75 kPa (60 kPa), and 60 to 100 kPa (80 kPa). When supplied ASV-PV is set at factory setting. It incorporates a shut-off function and a drain cock. ASV-PV is designed for installation in the return pipe.

Danfoss 065Z0156 putkiliitin

Danfoss AB-QM is a Pressure Independent Control Valve (PICV) that combines high accuracy with market-leading ease of use. AB-QM's design is fully geared to ensure that your projects meet your schedule and budget, while providing the most efficient HVAC system. Pressure-independent valves are control valves that have an automatic balancing function. A built-in pressure regulator maintains a constant differential pressure across the control valve, ensuring full authority and automatic flow limitation. By combining two functions in one, regulation and automatic water balance, PICVs from Danfoss offer a cost-effective solution to the challenges that far-sighted designers of HVAC systems face.

Easytop Ball valve- Inlet/outlet: Rp-threadComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, stainless steel ball, actuation lever T-form with medium marking green/red exchangeable. Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test markDN: 32, Rp: 114

Easytop Ball valve- Inlet/outlet: Rp-threadComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, stainless steel ball, actuation lever T-form with medium marking green/red exchangeable. Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test markDN: 50, Rp: 2

Plug-in piece - gunmetal - plug-in end, Rp-thread.

Adapter - gunmetal - soldered connection, Rp-thread.

Valmiiksi valmistetut ja irrotettavat korkit, jotka tekevät lämmitysjärjestelmien lämpöhäviön minimoinnin nopeaksi ja helpoksi sekä estävät kondensaation jäähdytysjärjestelmissä.

MTCV DN15, A-version, multifunctional thermostatic circulation valve for domestic water systems, (gunmetal)

VSH XPress -venttiili ruostumattomasta teräksestä 316L. Yhteensopiva VSH press-järjestelmän kanssa.