Rycote Mikrofonit - sivu 2

For mics, ø19.0 mm (ø 3/4") to ø32.0 mm (ø 1-1/4") - all vanes fitted
For mics, ø32.0 mm (ø 1-1/4") to ø38.0 mm (ø 1-1/4") - remove every other vane

Compatible with mics up to 8" long

MiniCMIT

The Rycote Stereo Windshield WS AE ORTF Kit is designed specifically for stereo microphones used in outdoor and field recording applications. It offers superior wind protection and minimizes wind noise and external interference, ensuring high-quality, clear audio even in challenging environments.

Windjammer Lavalier Ristretto Single Grey

Mic diameters: 55-68 mm
Microphone length: up to 300 mm

Includes:
1 x Soft Grip Extension Handle 037301
1 x Portable Recorder Suspension HD 041130
1 x Hot Shoe 3/8"Adaptor 037302
1 x Sony PCM-D100 Mini Windjammer 055458

Suitable for mics 24-25mm

Virtually flat frequency response from 70Hz to 20KHz

Fits microphones up to 70mm in length

Virtually flat frequency response from 70Hz to 20KHz

Fits over 45/100 foam of Large Diaphragm Condensers.

Suitable for Sennheiser MKE 400

Note: mic not included

Fits any large-diaphragm recording microphone with a diameter between 18 and 55mm

Specifications
Frequency Range: 40Hz - 18 kHz
Self Noise: 18.0 dB-A
Polar Pattern: Bi Directional
Capsule Type: Back Electret Condenser
Output Sensitivity: 14.2 mV/Pa (-32.7 dB)
Max. Output Voltage: 4 Vp
Output Impedence: 100 Ω
Min. Load Impedance: 1 k Ω
Signal / Noise Ratio: 78 dB typical (@ 1 kHz/Pa A-weighted)
CMRR (@ 1 kHz): > 60 dB
Max. Cable Length: 100 m
Powering: P-48
Powering Valid Range: 48-24V (Max SPL reduced at 24V)
Current Consumption: 3.0 mA
Max. SPL:
135 dB SPL (at 1 kHz 1.0%
THD Typical)
129 dB SPL (at 1 kHz 0.5%
THD Typical
RFI Shield: Yes
Connector: XLR-3M

Specifications:
Suspension weight: 154g (5.4 oz)
Overall diameter: 120mm (4.72")
Mic diameters: 18-55 mm
Microphone length: up to 300 mm
Maximum Weight (vertical): 750 g (26.5 oz)
Maximum weight (horizontal): 500g (17.6 oz)
Suspension Rotation (maximum): 175%

The Rycote InVision INV-6 Shock Mount is a professional-grade suspension mount designed to provide exceptional shock isolation for large microphones. It effectively minimizes vibrations and handling noise, ensuring clear, distortion-free audio capture in both studio and field environments. This shock mount is perfect for capturing high-quality recordings in demanding conditions.

Includes:
1 x InVision INV-3 041103
1 x Brass 3/8" M to 5/8" F screw adaptor 047302

Compatible microphones:
DPA 4017B, 4018A
Neumann KMR 81i, KMR 81D
Rode NTG-3, NTG-4
Sanken CS-1, CS-2
Schoeps CMC w/Cut 1, CMIT 5U, CMC w/Cut 60
Sennheiser MKH 416, MKH 8060 w/MZF

RYCOTE Cyclone Windjammer Medium

Rycote Stickies Advanced, 23mm O's (Pack) are high-quality adhesive pads designed to securely attach microphones or accessories to various surfaces. These pads reduce unwanted vibrations and minimize noise interference, making them ideal for field recordings and professional audio applications.

Nano-Shield 60Hz Filter Cable 22cm, XLR3

RYCOTE Cyclone Cable XLR-3M - XLR-3F 260mm

Size A

Nano-Shield 80Hz Filter Cable 22cm MZL