Tilta Muut - sivu 3

Tilta TT-C07. Tuotetyyppi: Lohenpyrstöurallinen levy, Tuotteen väri: Musta, Materiaali: Alumiini, Ruostumaton teräs. Tuotteen leveys: 101,6 mm, Tuotteen syvyys: 304,8 mm, Tuotteen korkeus: 25,4 mm. Sisältyvien tuotteiden lukumäärä: 1 kpl• Lohenpyrstöurallinen levy• Materiaali: Alumiini, Ruostumaton teräs• Musta

Tilta MB-T16-DCF. Tuotetyyppi: Suodatinkotelon adapterirengas, Tuotteen väri: Musta, Materiaali: Alumiini. Lukumäärä per pakkaus: 1 kpl

Tilta MB-T16-72. Tuotetyyppi: Suodatinkotelon adapterirengas, Suodattimen halkaisija: 7,2 cm, Tuotteen väri: Musta. Lukumäärä per pakkaus: 1 kpl

Without blocking the camera's hot shoe, the Tilta Full Camera Cage for Canon R5/R6, in black, provides two additional shoe mounts plus mounting threads for several optional Tilta add-ons. Dedicated 1/4"-20 threads allow you to attach side handles, single 15mm rod holders, and an HDMI clamp. There are also small threads on the front for securing a lens adapter support. For adjusting camera settings, the cage features a scroll wheel on top that controls the camera's right-hand scroll wheel .

Included with the cage is a quick release plate that attaches to the bottom. The plate offers multiple 1/4"-20 threads for balancing the cage on gimbals and other supports. The plate also allows quick release attachment to the optional Tilta 15mm LWS baseplate, which will let you expand the cage with rods and other accessories. Alternatively, Arca-Swiss and Manfrotto standard Tilta quick release plates can be purchased separately and attached in place of the included plate for direct compatibility with Arca/Manfrotto tripods and other supports.

The camera mounting platform is silicone padded for safe camera attachment. Also, a slot is provided on top for securing a safety strap, sold separately. The battery slot of the camera and all other ports and controls remain accessible through the all-aluminum cage.

These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.

Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Weight: 0.09lbs
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

Tilta MB-T15-58 kameran suodattimen lisävaruste Suodatinkotelon adapterirengas

Tilta MB-T15-TF. Tuotetyyppi: Kiinnityspuristin, Tuotteen väri: Musta, Materiaali: Hiilikuitu. Sisältyvien tuotteiden lukumäärä: 1 kpl• Kiinnityspuristin• Materiaali: Hiilikuitu• Musta

Tilta TA-QRTH5 kameran asennustarvike Kamerakahva

Tilta TA-T23-HCC-B. Tuotteen leveys: 95 mm, Tuotteen syvyys: 47 mm, Tuotteen korkeus: 109 mm

This backing for the MB-T12 matte box allows you to clamp the matte box onto lenses within a given front diameter.

This camera cage provides complete protective armor for the Panasonic GH4, GH5, and GH5S cameras. It provides several 1/4”-20 and 3/8”-16 mounting points as well as two cold shoe mounting points. The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Panasonic GH Series cage includes: the base Panasonic GH Series cage, quick release top handle, Tilta Hand Strap, Arca and Manfrotto quick release baseplates, a 15mm LWS baseplate for mounting accessories (as well as a single 15mm rod mounting clamp), an HDMI male to HDMI female cable, as well as a clamp to attach the HDMI cable comfortably to the cage and a clamp to attach both the HDMI and Nucleus Nano R/S cable comfortably to the cage.

- Includes a top plate with a shoe mount
- Four rosette mounts
- 1/4"-20 and 3/8"-16 accessory threads
- Multiple 1/4"-20 mounting threads for optimal balancing on gimbals
- Proprietary adapter plate included for attaching to the optional Tilta 15mm LWS Baseplate for RED KOMODO Cage by quick release

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, as well as a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4).

Compatible with Type II Baseplates and Type I Side Handles.

Tilta RS-TA-SYA videovakauttajan lisätarvike Ohjauskaapeli Musta Kupari, Ruostumaton teräs 1 kpl a6/a7/a9/a7sIII, FX3, A1

Tilta MB-T15-67. Tuotetyyppi: Suodatinkotelon adapterirengas, Suodattimen halkaisija: 6,7 cm, Tuotteen väri: Musta. Lukumäärä per pakkaus: 1 kpl

This support bracket helps to fully stabilize and secure your camera when mounted on the Gravity G1, G2, or G2X by attaching from the tilt arm of the gimbal to the hot shoe mount of your camera.

These follow focus marking disks attach to the hand wheel of the FIZ hand unit to allow you to create drawn-on custom marks for accurate focus pulls.

1. (1) 19mm dovetail plate
2. (2) Hand grips can be rotated 360 degrees from the Rosettes
3. High density foam handle for better support and stability
4. Quick Release Shoulder Pad (only compatible with the TILTA Alexa Mini baseplate)
5. (2) Side arms
6. Hard Shell Case
7. Great for handheld camerawork with any camera system

TECHNICAL DETAILS
Color: black
Material: aluminum-alloy

Tilta TA-SH1-97-G. Tuotetyyppi: Kahva, Tuotteen väri: Harmaa, Materiaali: Alumiini, Ruostumaton teräs. Tuotteen leveys: 190,5 mm, Tuotteen syvyys: 139,7 mm, Tuotteen korkeus: 88,9 mm. Sisältyvien tuotteiden lukumäärä: 1 kpl• Kahva• Materiaali: Alumiini, Ruostumaton teräs• Harmaa

1. (1) 15mm dovetail plate
2. (2) Hand grips can be rotated 360 degrees from the Rosettes
3. High density foam handle for better support and stability
4. Quick Release Shoulder Pad (only compatible with the TILTA Alexa Mini baseplate)
5. (2) Side arms
6. Hard Shell Case
7. Great for handheld camerawork with any camera system

TECHNICAL DETAILS

Color: black
Material: aluminum-alloy

Tilta MB-T15-72 kameran suodattimen lisävaruste Suodatinkotelon adapterirengas

The Quick Release Baseplate for Canon C500 Mk II/C300 Mk III connects to your camera via 1/4″-20 and 3/8″-16 tie down screws and features a non-slip, cushioned shoulder pad designed to be comfortable and secure.

The dual rosettes on each side of the baseplate allows users to quickly mount extension arms for better handheld support while the lens adapter support allows you to attach various lens mount adapters via a 1/4″-20 screw.

Front and back 15mm LWS rod supports allows you to easily mount accessories both in front of and behind the shoulder pad.

The baseplate’s VCT locking extension and locking toggle allows you to choose between mounting the baseplate to either a standard VCT plate or a Tilta standard dovetail plate.

Tilta TA-SFH1-97-G kameran asennustarvike Kahva

Tilta TA-LSP8-B kameran asennustarvike Kahva

Tilta Nucleus-M Wireless Lens Control System Partial Kit III
The Tilta Nucleus-M Wireless Lens Control System Partial Kit III contains the essential elements for pulling focus wirelessly while handholding. The kit includes the Nucleus-M left handgrip controller, one Nucleus-M motor, one removable lens belt, two motor power cables, and a battery charger unit (batteries not included). The handgrip controller provides wireless fingertip lens control while functioning as handgrip support for your camera rig, and the system enables pulling either focus, iris, or zoom on your lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens.

This partial kit is a single axis system, but the Nucleus-M left handgrip controller will allow you to control additional motors (not included) so you can control more than one lens ring. The included motor power cables allow you to power a motor from either a D-Tap power source or a second motor via the 7-pin to 7-pin connector. The included power cables allow you to easily add a second motor (not included) to the system. The included rosettes aid in mounting the handgrip controller to your camera or rig with ARRI-style rosettes. The system can wirelessly pull focus from up to 1000' away, and with separately available batteries you can power the hand unit for approximately 10 hours on a single charge.