This 2-20W LED driver is used with Nordtronic's mini downlights and cabinet lights. This LED driver is not dimmable.

Electronic ballast for HF-spole til 2x14, 21, 28, 35S T5

- 30 W constant voltage LED driver- 12 V constant voltage output- Lifetime (h): 30,000- Voltage range (V): 198–264- Max temperature at Tc point (°C): 80- Ambient temperature range: –15 °C .. +45 °C- IP rating: IP20- Lifetime (h): 30,000 (see more details in datasheet)

250mm cable, 8mm fixing stud, 28x56

250mm cable, 8mm fixing stud, 45x93

250mm cable, 8mm fixing stud, 28x56

250mm cable, 8mm fixing stud, 28x56

250mm cable, 8mm fixing stud, 40x68

250mm cable, 8mm fixing stud, 36x70

250mm cable, 8mm fixing stud, 36x70

250mm cable, 8mm fixing stud, 28x56

LED-ajuri, 20 watti(a), 1670 mA

250mm cable, 8mm fixing stud, 32x56

250mm cable, 8mm fixing stud, 55x122

250mm cable, 8mm fixing stud, 45x93

250mm cable, 8mm fixing stud, 40x93

250mm cable, 8mm fixing stud, 36x70

250mm cable, 8mm fixing stud, 40x93

Constant Current LED Driver / 30 W
dimmable, 24 V DC for LEDs up to 30 W total load

ECG for FL and CFL - not dimmable. Product benefits: • Long lamp life • No adverse effect from frequent on/off switching • Automatic restart after lamp replacement • Perfect lamp start for applications with motion sensors • VDE/VDE EMC certified system • Very high energy efficiency due to cut-off technology • Areas of application: • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100, industry, open-plan offices, corridors and storage rooms, public buildings, sports halls and factories, strip lighting • Suitable for emergency lighting (DC operation) • Modernization of existing systems. Product features: • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate) • Energy Efficiency Index EEI: A2 BAT • Automatic shutdown of defective lamps and at end of life (EoL T.2) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929

Product features • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Life time: >100,000 h (for T = 65°C at Tc) • Automatic shutdown of defective lamps and at end of life (EoL) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Perfect lamp start for applications with motion sensors • Automatic restart after lamp replacement