PEX-järjestelmät - sivu 10

EPDM 120x120 - halkaisija 54

Used for connection between Pex and pipe, valves etc. with thread

Used for connection between Pex and pipe, valves etc. with thread

Manifold in gunmetal with push and insert in AISI 316

Uponor 3/4 4X15 mm pipe with fixed socket

Messinkinen moniputkinen jakoventtiili, jossa on neljä ulostuloa vesi- ja lämmitysjärjestelmiin.

Messinkinen korkki jakotukille. TEA-pinta.

Messinkikorkki TEA-pinnalla 3/4 kollektorille

Täydellinen sovitussetti polyeteeniputkelle. Messinki TEA-pinnalla.

Vesille tarkoitettu monipistejärjestelmä, jossa on 3 ulostuloa. Sisältää 15 mm liittimen polyeteeniputkelle TEA-pinnalla.

Monipuolisin vesi TEA 3 ulostuloilla 15/10 mm liittimillä.

Täydellinen messinkinen sopeutumissarja TEA-pinnalla.

Monipuolisin vesi TEA 3 ulostuloilla 16/12 mm liittimillä

Monipuolisin vesi TEA 2 ulostuloilla 16/12 mm liittimillä.

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Kaksi päättelylaatikkoa, joissa on kaksi DR-messinkistä Q&E-päättelykyynärpäätä valkoisilla Q&E-renkailla, metallinen kiinnitysteline kiinnittämiseen c/c 150mm etäisyydelle ja kiinnitysruuvit. Vesitiivis liitäntä PE-Xa-putkien ja Uponor-kanavien kanssa kaikenlaisissa seinissä NT VVS 129:n mukaisesti.

For dry wall, push

Sealing membrane UPONOR M7 for junction box

Pipe cutter for up to 22mm, Unite.

Roth QuickBox-red Wallbox in gunmetal, 15 mm push.

Uponor 1016691 putkiliitin Hanasovitin

Uponor 1008669 putkiliitin Hanasovitin

Uponor 1033975 putkiliitin Päätytaite

Uponor 1008661 putkiliitin Hanasovitin

Uponor 1008663 putkiliitin Hanasovitin