Geberit Paineputket ja liittimet - sivu 4

For heating systems, cooling and industry
For climate technical areas
For sprinkler systems (wet)
Not suitable for drinking water pipes

For heating systems, cooling and industry
For climate technical areas
For sprinkler systems (wet)
Not suitable for drinking water pipes

Lämmitysjärjestelmiin, jäähdytykseen ja teollisuuteen
Ilmastoteknisiin alueisiin
Sprinklerijärjestelmiin (märkä)
Ei sovellu juomavesiputkiin.

Bend cst 45g d54 zn-pl

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

For heating systems, cooling and industry
For climate technical areas
For sprinkler systems (wet)
Not suitable for drinking water pipes.

Geberit 31219 vesiputkien osa Letkun välikappale Ruostumaton teräs 1 kpl

Elbowad ft cst 90g d28-rp1/2 zn-pl

For heating systems, cooling and industry For climate technical areas For sprinkler systems (wet) Not suitable for drinking water pipes.

For sanitary facilities and industry, for heating systems, cooling and industry.

Saniteettitiloja ja teollisuutta varten, lämmitysjärjestelmiä, jäähdytystä ja teollisuutta varten.

Geberit 31210 vesiputkien osa Letkun välikappale Ruostumaton teräs 1 kpl

For sanitary facilities and industry, for heating systems, cooling and industry.

Geberit Mapress FZ El-forzinket

Til varmeanlæg og afkølingPresseindikatorUtæt ved manglende presningFrem- og tilbageløb kan skiftesUdvendigt forzinketT...

...

T-piece ft cst d35-rp1/2-35 zn-pl

For heating systems, cooling and industry For climate technical areas For sprinkler systems (wet) Not suitable for drinking water pipes.

Geberit 22102 vesiputkien osa Letkun välikappale Hiili, Terästä 1 kpl

Geberit 21305 vesiputkien osa Letkun välikappale Hiili, Terästä 1 kpl

T-piece ft cst d28-rp1/2-28 zn-pl

Geberit 30406 viemäri-, jäte- & ilmaputken sovite

Geberit 20702 viemäri-, jäte- & ilmaputken sovite

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Geberit 30304 viemäri-, jäte- & ilmaputken sovite

The Geberit Mapress electro-galvanized press fitting system can be used for joining pipes in closed hot and cold water systems as well as sprinkler systems, fire-fighting water pipes and compressed air networks. Mapress electro-galvanized fittings are made of unalloyed steel. The press joining of pipes and fittings must be carried out with press jaws with an M-profile. When pressing, the pipe is inserted into the press fitting to the marked insertion depth and is thus pressed together.

Please note that Geberit Mapress pipes should be cut to size with a regular pipe cutter before use, and then deburred both inside and outside with a suitable deburring tool. Cutting and deburring are important precisely to avoid damage to the O-ring when the pipe is inserted into the press fitting.