Viega Paineputket ja liittimet - sivu 12

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2312

Viega 2312

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread ComponentsEPDM sealing element, polygon, VdS certificationd: 54, R: 2

Viega 2315.5

Viega 2315

Sanpress Inox Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, VdS certificationd1: 42, d2: 22

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 22, Rp: 34, d2: 22

Viega 2212

Viega 2211

Sanpress Sliding coupling with SC-Contur- gunmetal or silicium bronze- press connectors ComponentsEPDM sealing elements, VdS certificationd: 42

Viega 2215.1

Viega 2215.1

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elementsd1: 28, d2: 22, d3: 28

Viega 2218

Viega 2225.5

Viega 2214.2

Viega 1117.2

Viega 1118

Viega 1115.1

Viega 1112

Megapress Adapter with SC-Contur- for steel pipes in accordance with DIN EN 10220/10255 - non-alloyed steel, zinc-nickel coating- press connection, R-threadComponentsEPDM sealing element, cutting ring, separator ring, polygonDN: 10, D: 38, R: 38

Viega 2616

Viega 2216.1XL

Viega 2618