Viega Paineputket ja liittimet - sivu 18

Viega 1115.1

Viega 1118

Viega 2316

Viega 1126.1XL

Viega 2315

Sanpress Inox Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing elementd1: 22, d2: 15

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 42, d2: 28, d3: 42

Viega 1116.1

Viega 1117.2

Viega 1115.1

Viega 2318

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Profipress G T-piece with SC-Contur- gunmetal- press connectors, Rp-thread- polygonComponentsHNBR sealing elements d1: 28, Rp: 12, d2: 28

Profipress G T-stykke med SC-Contur- kobber- prestilslutningMedHNBR pakningerd1: 28, d2: 22, d3: 28

Profipress G Coupling with SC-Contur- copper - press connectors Components HNBR sealing elements d: 42

Viega 1165

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread Components EPDM sealing element, polygon, VdS certificationd: 22, R: 1

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, Rp-threadComponentsEPM sealing element, VdS certificationd: 22, Rp: 34

Viega 2315.1

Viega 2315.5

Viega 1126.1

Viega 1112.1

Viega 1115.1

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2416