Paineputket ja liittimet - sivu 28

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon.

Geberit 31225 vesiputkien osa Letkun välikappale Ruostumaton teräs 1 kpl

T-piece cst d28-15-28 zn-pl

Megapress-sovitin SC-Conturilla juomavesiasennuksiin - teräsputket DIN EN 10220/10255 mukaisesti, galvanointi DIN EN 10240 mukaisesti - messinki tai piibronssi - puristusliittimetKomponentitEPDM-tiivistysosa, leikkausrengas, erotusrengasDN: 20, D: 34, d: 22

Viega 2318

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2211

Viega 2217.2

XPress Stainless alennettu T-haara FFF 108X42X108

VSH 90 asteen mutka-nippa 15 mm happokestävä.

Sanpress Coupling with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elementsd: 15

XPress ruostumaton teräksinen kierteellinen T-haara FFF 76XRp3/4X76

XPress Stainless alennettu T-haara FFF 28X22X28

XPress Carbon suora liitin FF 88,9

XPress Carbon vähennetty T-kappale FFF 108X88,9X108

VSH 45 asteen mutka liitin/liitin 108 mm fz.

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Viega 1118

Viega 1115.1

Viega 1109.3

Profipress T-piece with SC-Contur- copper- press connectorsComponentsEPDM sealing elements d1: 22, d2: 15, d3: 22

Viega 1115.1

Viega 2416.1

The Geberit Mapress electro-galvanized press fitting system can be used for joining pipes in closed hot and cold water systems as well as sprinkler systems, fire-fighting water pipes and compressed air networks. Mapress electro-galvanized fittings are made of unalloyed steel. The press joining of pipes and fittings must be carried out with press jaws with an M-profile. When pressing, the pipe is inserted into the press fitting to the marked insertion depth and is thus pressed together.

Please note that Geberit Mapress pipes should be cut to size with a regular pipe cutter before use, and then deburred both inside and outside with a suitable deburring tool. Cutting and deburring are important precisely to avoid damage to the O-ring when the pipe is inserted into the press fitting.

Artikkeli XPress Copper suora liitin FF 28xRp3/4 Artikkelinumero (GTIN) 6270G2834 (05022050204141) Yksittäiskappaleen GTIN 05022050204097 Osa artikkeliryhmää XPCU270G - XPress Copper suora liitin Koko 28xRp3/4 Tuotteen paino 0,13 kg p x l x k 40x39x39 Pakkaus (5 pussi)