Paineputket ja liittimet - sivu 4

XPress ruostumaton liitin mutterilla FF 22XG1

XPress ruostumaton kulma-adapteri 90 astetta FF 18XRp1/2

XPress ruostumaton kulma-adapteri 90 astetta FF 28XRp1

VSH 90 asteen mutka liitin/nänni 54 mm X 2 happokestävä.

XPress Carbon+ruostumaton teräs o-rengas viton LBP 28

XPress Carbon T-liitin FFF 54

XPress Carbon kyynärpää 90 astetta FM 18XR1/2

For sanitary facilities and industry, for heating systems, cooling and industry.

Viega 1118

Viega 1115.1

Viega 1111

Viega 1126.1XL

Viega 1116

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Viega 2216

XPress ruostumaton suora liitin FF 15XRp1/2

XPress ruostumaton suora liitin FM 54XR2

XPress ruostumaton liukupari FF 35

XPress ruostumaton suora liitin FF 28

Viega 2312

Viega 2311

Sanpress Inox Coupling with SC-Contur- steel non-corroding - press connectorsComponents EPDM sealing elements d: 54(VdS certification)

Sanpress Inox Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, VdS certificationd1: 54, d2: 42

Viega 2212.1

Viega 2215.5