Paineputket ja liittimet - sivu 57

Viega 1117.2

Viega 2226.1

Viega 2212

Forcing plug- for leakage test, temporarily closed pipeline section- brass- compression fitting, hose connection for filling hoseComponentsKFE tap, union nut screw fittingd: 28

Viega 2218

For heating systems, cooling and industry
For climate technical areas
For sprinkler systems (wet)
Not suitable for drinking water pipes.

Sovitin mt, jossa on liitin cst d22-r1/2 zn-pl.

For sanitary facilities and industry, for heating systems, cooling and industry.

For sanitary facilities and industry, for heating systems, cooling and industry.

Viega 2211

For heating systems, cooling and industry
For climate technical areas
For sprinkler systems (wet)
Not suitable for drinking water pipes

Geberit 31109 viemäri-, jäte- & ilmaputken sovite

Geberit 35309 vesiputkien osa Letkun välikappale Ruostumaton teräs 1 kpl

Geberit Mapress Stainless Steel union with union nut made of CrNi steel: d=35mm

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Viega 1115.1

Viega 2226XL

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elements d1: 54, d2: 22, d3: 54

TuotetiedotArtikkeli XPress Copper suora liitin FM 22xR1/2 Artikkelinumero (GTIN) 38110 (05022050200617) Yksittäiskappaleen GTIN 05022050200501 Osa artikkeliryhmää S3 - XPress Copper suora liitin Koko 22xR1/2 Tuotteen paino 0,07 kg l x w x h 38x32x32 Pakkaus (5 kpl pussi) OminaisuudetVärit Kupari Materiaalit Pronssi, kupari Valmistaja Pegler Yorkshire Muoto Suora, supistusliitin Liitostyyppi Puristusliitos (M), R - uroskierre kaasukartioinen (BSPT) Tiivistys EPDM

Sanpress Inox Connection screw fitting with SC-Contur- steel non-corroding- press connection, G-thread- flat sealingComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting d: 18, G: 34

XPress Stainless lopetuskappale F 28

XPress ruostumaton aksiaalikompensoija FF 22

XPress ruostumaton aksiaalikompensoija FF 18

XPress ruostumaton suora liitin FF 28XRp3/4