Tech-Protect Puhelintarvikkeet - Näytönsuojat - sivu 7

Tech-Protect Glass SPY+ is a premium tempered glass with advanced privacy technology that protects your data from unauthorized access. A special privacy layer limits the visibility of the screen to outsiders looking from the side, so that the content displayed on your phone remains visible only to you. It's the perfect solution to protect the confidentiality of conversations and messages while traveling, working in public places, or everyday use.

The glass provides excellent protection for the display against scratches, bumps and dents thanks to its 9H hardness. It does not affect the touch sensitivity or color saturation, while maintaining the full functionality of the phone. The high-quality oleophobic coating minimizes the amount of fingerprints left behind, and the milled 2.5D edges ensure a smooth touch and comfort of use. The incredible smoothness of the surface has a positive effect on the comfort of everyday work with the phone.

The easy installation procedure makes the installation affordable for any user, even those who are inexperienced in putting on lenses. Perfect clarity preserves the original image display quality.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Quick Set+ is a premium tempered glass that combines exceptional durability with ease of installation and crystalline clarity. Made of 9H hardness glass, it effectively protects the screen from scratches, bumps and everyday damage, without compromising the brightness and sharpness of the displayed image.

The special oleophobic coating effectively reduces fingerprint build-up and makes it easier to keep the surface clean. The glass does not affect the sensitivity and precision of the touch, ensuring a smooth and comfortable use of the smartphone on a daily basis.

The innovative mounting system with positioning frame makes the glass application fast, precise and hassle-free – without the risk of air bubbles or exposing the screen to dust. Simply put on the frame, pull on the starter film and press down – the glass adheres perfectly to the screen the first time.

* Due to the various milling of the edges of the displays, a slight halo of air may form around the screen after the protective glass is installed on the screen. This is a natural situation and depends on the structure of the screen itself.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass, only 0.3mm thick.

The perfectly fitted design fully preserves the touchscreen's sensitivity. The manufacturer rates its hardness at 9H on a 10-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is crystal clear, preserving natural colors and display sharpness. An additional advantage is a special oleophobic coating that effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, making it easier to keep clean.

* The glass is compatible with most cases available on the market.
**Due to the varying milling patterns on display edges, a slight air halo may appear around the screen after installing a screen protector! This is a natural occurrence and depends on the milling pattern of the screen in a given unit.

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Install the cover as evenly as you can - you can position it using two leaves, sticking them to the side of the device.
4) Eliminate any air bubbles by pressing firmly in circular motions for several dozen seconds. Do this to ensure the adhesive bonds as strongly as possible to the screen.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass, only 0.3mm thick.

The perfectly fitted design fully preserves the touchscreen's sensitivity. The manufacturer rates its hardness at 9H on a 10-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is crystal clear, preserving natural colors and display sharpness. An additional advantage is a special oleophobic coating that effectively minimizes the accumulation of fingerprints and other contaminants on the glass surface, making it easier to keep clean.

* The glass is compatible with most cases available on the market.
**Due to the varying milling patterns on display edges, a slight air halo may appear around the screen after installing a screen protector! This is a natural occurrence and depends on the milling pattern of the screen in a given unit.

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Install the cover as evenly as you can - you can position it using two leaves, sticking them to the side of the device.
4) Eliminate any air bubbles by pressing firmly in circular motions for several dozen seconds. Do this to ensure the adhesive bonds as strongly as possible to the screen.

The Tech-Protect Quick Set Spy+ 2-Pack Privacy Glass is an innovative solution for maximum privacy protection during use. A special filtering technology ensures that the screen content is visible only to the user looking directly at the display, while those watching from the side see only the black screen.

The glass combines two key functions - privacy protection and full protection of the display against scratches, cracks and impacts. Made of tempered glass with a highest hardness of 9H, it provides excellent image quality without affecting the responsiveness of the touch screen.

The kit includes two protective lenses and a special installation frame that guarantees perfect positioning and application of the glass without air bubbles. This comprehensive installation system eliminates the common problems associated with tempered glass application, ensuring a professional result the first time.

Ideal for people working with sensitive data, traveling by public transport or simply valuing their privacy in public places.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Protect your smartphone's camera in a stylish and effective way with Tech-Protect Camfull Fit+. It is a high-quality cover made of durable aluminum and tempered glass, which protects the lenses from scratches, mechanical damage and dirt.

Thanks to the precise fit, the hood adheres perfectly to the camera module, without affecting the quality of photos or recordings. Its thin and light design makes it virtually invisible while effectively extending the life of your camera.

Installing the cover is simple and quick – just place it on the camera module to secure it. It's perfect for people who want to keep their phone in perfect condition without sacrificing its elegant look.

Tech-Protect Glass SPY+ is a premium tempered glass with advanced privacy technology that protects your data from unauthorized access. A special privacy layer limits the visibility of the screen to outsiders looking from the side, so that the content displayed on your phone remains visible only to you. It's the perfect solution to protect the confidentiality of conversations and messages while traveling, working in public places, or everyday use.

The glass provides excellent protection for the display against scratches, bumps and dents thanks to its 9H hardness. It does not affect the touch sensitivity or color saturation, while maintaining the full functionality of the phone. The high-quality oleophobic coating minimizes the amount of fingerprints left behind, and the milled 2.5D edges ensure a smooth touch and comfort of use. The incredible smoothness of the surface has a positive effect on the comfort of everyday work with the phone.

The easy installation procedure makes the installation affordable for any user, even those who are inexperienced in putting on lenses. Perfect clarity preserves the original image display quality.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Made of aluminum and glass, the camera lens caps from Tech-Protect Camring Fit+ are a very stylish way to protect this part of the device. The pads provide protection against scratches and breakage.

The set comes with a perfectly cut mounting frame, thanks to which you can position the glass perfectly. The manufacturer has simplified the installation method to such an extent that it is fully intuitive for every user.

The Tech-Protect Camalloy Fit+ cover is a precision-crafted accessory that effectively protects the camera module in your smartphone. Made of durable aluminum alloy, it protects against scratches, dirt and minor damage during daily use.

Thanks to its slim design and perfect fit, the hood does not affect the quality of photos or recordings, and its installation is quick and simple – just place it on the camera module to make it snug against the surface.

The minimalist design makes the cover almost invisible, maintaining the elegant appearance of the device. It's a practical and aesthetic solution for people who want to provide their smartphone with maximum protection without sacrificing style.

Tech-Protect Easy Set+ is a comprehensive protective kit that protects the screen and lens of the device. The tempered display coating made of lightweight, milled glass with a hardness of 9H provides maximum protection against scratches and cracks.

Crystal clear glass guarantees image clarity, perfect reproduction of color saturation and does not disturb touch sensitivity. Additionally, they are covered with a high-quality oleophobic coating that minimizes the amount of fingerprints and other contaminants left behind. Protective lens cap made of tempered glass with 9H hardness, precisely cut, provides protection against scratches and cracks.

Installation accessories are included in the set, along with the Easy Set+ positioning frame, which makes installation simple and affordable for every user. The frame guarantees perfect positioning of the glass on the screen, eliminating the risk of crooked mounting.

Tech-Protect Camring Fit+ is a camera cover that combines aluminum and tempered glass that protects your smartphone's lenses from scratches and bumps. Included is a mounting frame that guides the installation precisely and ensures that each slide is positioned perfectly. It's a sleek protection that doesn't interfere with the camera or affect the quality of your photos.

An aluminum frame surrounds the camera module, creating the first line of defense against impacts and contact with surfaces. Tempered glass covers each lens separately, protecting it from scratches from keys, sand, and other sharp objects. The design is precise enough to not affect autofocus, white balance or the quality of the footage. The black color scheme blends perfectly with most cases and adds a premium character to the phone.

The Camring Fit+ mounting system is designed for simplicity and reliability of installation. A dedicated frame guides each slide to the right place, eliminating the risk of inaccurate seating. Once installed, the cover remains invisible in daily use, preserving the full functionality of the camera. It is a comprehensive protection of the photo module without compromising on the quality of photos.

Slim and light case with built-in glass designed to fit perfectly on your Apple Watch.
Defense360 from Tech-Protect is a stylish way to fully protect your Watch.

The integrated tempered glass does not affect the touch sensitivity or the quality of the displayed image.
During installation, degrease the screen surfaces with an alcohol-based liquid.

Made of aluminum and glass, the camera lens caps from Tech-Protect Camring Fit+ are a very stylish way to protect this part of the device. The pads provide protection against scratches and breakage.

The set comes with a perfectly cut mounting frame, thanks to which you can position the glass perfectly. The manufacturer has simplified the installation method to such an extent that it is fully intuitive for every user.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Made of aluminum and glass, the camera lens caps from Tech-Protect Camring Fit+ are a very stylish way to protect this part of the device. The pads provide protection against scratches and breakage.

The set comes with a perfectly cut mounting frame, thanks to which you can position the glass perfectly. The manufacturer has simplified the installation method to such an extent that it is fully intuitive for every user.

Made of aluminum and glass, the camera lens caps from Tech-Protect Camring Fit+ are a very stylish way to protect this part of the device. The pads provide protection against scratches and breakage.

The set comes with a perfectly cut mounting frame, thanks to which you can position the glass perfectly. The manufacturer has simplified the installation method to such an extent that it is fully intuitive for every user.

Tech-Protect Glass Fit+ is a tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen, while maintaining full touch sensitivity.

The 9H hardness on a ten-point scale means that the glass can withstand contact with keys, coins and other sharp objects that you carry in your pocket every day. The thickness of only 0.3 mm practically does not change the profile of the tablet and does not affect the responsiveness of the screen. The hardened material dissipates the force of the impact, protecting the display from cracks during falls.

The oleophobic coating minimizes the accumulation of fingerprints and makes it easier to keep the glass clean. Crystal clarity preserves natural colors and sharpness of the image. The glass design ensures compatibility with most available cases.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Supreme Set+ is an advanced hydrogel film that provides reliable protection for your smartwatch's screen. The exceptional flexibility of the material guarantees a perfect fit to the curved display, protecting it from scratches and minor damage. A special coating prevents fingerprints, keeping the screen clean.

The film is distinguished by its self-healing properties, which allow for the automatic removal of small scratches within a few hours. The ultra-thin design maintains full transparency and excellent image quality without affecting the sensitivity of the touchscreen. Precise adjustment to the shape of the display ensures full coverage and protection without interfering with the functioning of the device.

Simple installation is facilitated by the tools included in the kit, including the positioning frame, which eliminates the risk of air bubbles and guarantees perfect application of the film.

Tech-Protect Easy Set Flex+ is a revolutionary hybrid glass with an advanced mounting system. The set includes three lenses and an orange mounting frame that guides the installation precisely and eliminates the risk of incorrect embedding. It is a solution created for those who value simplicity and perfect effect.

The ultra-thin design virtually disappears on the screen of your watch. The ceramic coating with a hardness of 7H effectively protects against scratches from daily contact with surfaces. The biggest advantage of hybrid glass is its flexibility – unlike traditional tempered glass, the material absorbs impact energy without cracking or crumbling. This means long-term protection without the risk of violent damage.

The Easy Set system is a well-thought-out tool that makes installation intuitive and secure. The orange bezel precisely holds the watch and glass in the perfect position, allowing for stress-free installation. Full Clarity maintains the display's crystal clear clarity and natural color reproduction, without affecting touch sensitivity or the operation of any Apple Watch features. The three lenses in the set provide long-term protection for the future.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use.

The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

The Tech-Protect Hydro Flex+ hydrogel film is a modern screen protector that, thanks to its flexible and self-healing surface, effectively protects the display against scratches, dirt and minor mechanical damage.

It perfectly adapts to the shape of the screen, including curved edges, providing full coverage without affecting image quality and touch sensitivity. The ultra-thin design guarantees high transparency and comfort of use, and easy application allows for quick and trouble-free application of the film without the formation of air bubbles.