Puhelintarvikkeet - Näytönsuojat - sivu 48

The crystal clear Easy Slide tempered glass from Ringke perfectly renders the displayed colors and does not affect the sensitivity of the touch.
Made of recycled and reinforced tempered glass. The high degree of hardness (9H) makes Easy Slide scratch-resistant even in contact with sharp objects (knife or keys).

The glass is covered with a special oleophobic coating, thanks to which the aspect of leaving fingerprints or other contaminants on the surface of the glass is minimized.

Easy Slide is dedicated in particular to protecting the screen from scratches as well as impacts resulting from an unexpected fall of the phone.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

* The glass has the widest possible Case Friendly die-cut, which means it will be compatible with most cases on the market and with any Ringke case.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1. Start the installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

Tempered glass with a revolutionary installation method - if you have been terrified by this aspect of using tempered glass so far, your problems have just been solved!

The tempered glass from the "EZ Fit" series from Spigen has been secured with a mounting frame perfectly cut to the front of the phone, thanks to which you can perfectly position it on the screen. The manufacturer has simplified the method of installation to such an extent that it is fully intuitive for every user.

Privacy Glass is a thin coating that has been hardened to 9H hardness during the production and tempering process. This makes it scratch-resistant even when in contact with sharp objects such as keys or knives.

The glass is covered with an oleophobic and hydrophobic layer that prevents fingerprints or other impurities from leaving on the screen. It is crystal clear and perfectly reflects the displayed colors. It also does not affect touch sensitivity and has exceptional smoothness, thanks to which running your finger across the screen becomes a pleasure.

Its additional function is to protect privacy - the glass blocks the light emitted by the display at a certain angle, thereby achieving an effect similar to that of ATMs.

The glass is designed specifically to protect the screen against scratches and minimizes the risk of screen damage in the event of an unexpected fall.

High-quality Ringke Easy Slide tempered glass with a protective filter function is an ideal way to protect the screen from damage and also limit its visibility to outsiders. The polarizing filter limits the visibility of the screen at an angle of 28° and completely reduces it at an angle of 40°.

The glass has a hardness of 9H, which is sufficient to effectively protect the screen, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

Trust the Ringke brand and its excellent quality!

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

ASSEMBLY INSTRUCTIONS:

1. Start installation in the bathroom right after bathing – water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.Done! Enjoy a perfectly applied screen protector.

SBS Omniglass X Kirkas näytönsuoja Universaali 1 kpl

High-quality Ringke Easy Slide tempered glass with a protective filter function is an ideal way to protect the screen from damage and also limit its visibility to outsiders. The polarizing filter limits the visibility of the screen at an angle of 28° and completely reduces it at an angle of 40°.

The glass has a hardness of 9H, which is sufficient to effectively protect the screen, with high resistance of the glass itself to superficial scratches. It is also covered with an oleophobic layer, which reduces the degree of fingerprints leaving on the screen.

Additionally, to ensure easy installation, the Easy Slide installation tool is included to make glass application simpler and more precise.

Trust the Ringke brand and its excellent quality!

* The glass is cut only to the flat part with an emphasized structure, in accordance with and on the basis of the die prepared by the manufacturer of a given phone model.
** Due to the variety of milling, a slight halo of air may form around the screen after installing the protective glass on the screen. This is a natural situation and depends on the device itself.

INSTALLATION INSTRUCTIONS:
1. Start installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles by swiping your finger in a circular motion.

Done! Enjoy a perfectly applied screen protector.

Perfectly fitting and crystal clear tempered glass from Ringke designed to protect your phone's camera lens from damage.
Ringke glass is a 5-layer protective coating made of high-quality components.

The glass fully covers the camera sections and provides protection against scratches and breakage.

AMAZINGthing RADIX Näytön yksityisyydensuoja Apple 1 kpl

Näytön suojus tuotteelle matkapuhelin, lasi malleihin Apple iPhone 15 Plus, 16 Plus

Made from TPU for durability
Complete display coverage from edge to edge
Includes 1 screen protector and installation kit
Material: Flexible Film

PanzerGlass SARNUWFG58319 luokittelematon

Wozinsky Privacy Glass is a combination of solid screen protection and effective privacy protection – now in a set of 2 pieces. The anti-spy filter blocks the screen's visibility at an angle so that outsiders can't see the content you're seeing. The 9H hardness glass effectively protects the phone screen from scratches and falls. All the necessary mounting accessories are included, and a special reinforcing frame enhances the aesthetics and durability of the protection. The screen remains fully touch-sensitive and does not lose the quality of the displayed image – comfort and safety in one form.

Wozinsky Tempered Glass Tempered Glass for Xiaomi Redmi Pad Pro 5G
Wozinsky Tempered Glass protects your phone's screen from everyday surprises. Made of the highest quality materials, it offers not only durability, but also transparency. Simple installation and complete application kit enable immediate and trouble-free protection.

Tech-Protect Glass Spy+ is the perfect solution for users who value the privacy and security of their data. The privacy technology used limits the visibility of the screen to outsiders, protecting against unauthorized access, which contributes to increasing the confidentiality of our conversations and messages.

The Tech-Protect Glass Spy+ also provides excellent protection for the display against scratches, bumps, and dents, ensuring that your phone stays in top condition for a long time. Its hardness level is rated by the manufacturer at 9H on a ten-point scale. It does not affect the touch sensitivity and saturation of the displayed colors. In addition, it is covered with a high-quality oleophobic coating, which minimizes the number of fingerprints left.

It is also worth noting the incredible smoothness of the touch, which affects the comfort of using the phone.
In addition, the easy installation procedure makes it affordable for anyone, even those who are inexperienced in glass installation.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Näytön suojus tuotteelle matkapuhelin, heijastusta estävä, lasi, yksityisyyssuodattimella, 2-suuntainen malleihin Apple iPhone 15 Plus, 16 Plus

AMAZINGthing TITAN Näytön yksityisyydensuoja Apple 1 kpl

Näytön suojus tuotteelle matkapuhelin, kirkas

Näytön suojus tuotteelle tabletti, lasi, kirkas

Näytön suojus tuotteelle matkapuhelin, kokonäyttö, 4H Brilliant, kalvo, läpinäkyvä malleihin OnePlus 15

Näytön suojus tuotteelle matkapuhelin, lasi, kirkas malleihin Apple iPhone 13 Pro Max

Takakansi matkapuhelimelle, kirkas, sekä Karkaistun lasin näytönsuoja malleihin Apple iPhone 16 Pro

Näytön suojus tuotteelle matkapuhelin, koko ruutu, 3D, lasi, kehyksen väri musta malleihin OnePlus 12

Näytön suojus tuotteelle matkapuhelin, lasi, kirkas malleihin Apple iPhone 16 Plus

Näytön suojus tuotteelle matkapuhelin, koko ruutu, 2.5D, lasi, kehyksen väri musta malleihin Samsung Galaxy S25 Ultra

Näytön suojus tuotteelle matkapuhelin, 3D, kalvo, läpinäkyvä malleihin Samsung Galaxy S24, S25

Näytön suojus tuotteelle matkapuhelin, lasi, kirkas malleihin Apple iPhone 15 Pro Max