Sähkökeskustarvikkeet - sivu 60

Siemens 3RT2017-2BB42 luokittelematon

Siemens 3RT2916-1BB00 sähköisen kontaktorin osa ja tarvike

Lukkorunko automaattiselle sulakkeelle PSL-CB PANDUIT GmbH:ltä.

Tämä Acti9 iC60N on matalajännitepienjännitekatkaisija (MCB). Se on 2P-piirikatkaisija, jossa on 2 suojattua napa, 2A nimellisvirta ja C-laukaisukäyrä. Sitä voidaan asentaa DIN-kiskoon modulaarista asennusta varten. Piirikatkaisijana sen katkaisukyky IEC/EN 60898-1:n mukaan on 6000A/400VAC. Piirikatkaisijana sen katkaisukyky IEC/EN 60947-2:n mukaan on 50 kA /230VAC ja 50 kA /400VAC. Tämä pienoispiirin katkaisee piirit oikosulkuvirtaa ja ylikuormitusta vastaan. Sen terminaalit ovat IP20-suojaluokkaa (IEC/EN60529) . Modulaarisessa koteloissa se saavuttaa IP40-suojaluokan II luokan eristyksellään . Nopeasti sulkeutuva mekanismi parantaa sen käyttöikää . Rajoitusluokka III (IEC60898-1) parantaa alavirtapiiri suojauksen kustannuksia . Ainutlaatuinen Visitrip-ilmaisin lyhentää korjausaikoja näyttämällä viallisen piirin Visisafe-vihreän nauhan avulla varmistetaan kontaktien fyysinen avaaminen alavirtahuollon mahdollistamiseksi.

iC60N - pienoisvirtakytkin - 2P - 6A - D-käyrä

iC60N - pienoisjännitekatkaisija - 2P - 13A - C-käyrä

iC60N - pienoisvirtakytkin - 3P + N - 16A - B-käyrä

levittäjäsarja - 52,5 mm askelväli - tasainen liitäntä - 3 tolppaa

TeSys K - erotuslämpötilan ylikuormitussuoja - 1,8...2,6 - luokka 10A

TeSys D kääntökontaktori - 3P(3 NO) - AC-3 - <= 440 V 9 A - 24 V AC-kela

Pienikokoinen plug-in-rele - Zelio RXM - 2 C/O - 230 V AC - 12 A - LED-valolla.

Säädelty SMPS - 1 tai 2-vaiheinen - 100..500 V - 24 V - 3 A

This is a 3 poles basic frame for ComPacT NSX250F. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 36kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 105mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX250F is part of Schneider Electric EcoStruxure Power architecture.

This is a 4 poles basic frame for ComPacT NSX250F. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 36kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 140mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX250F is part of Schneider Electric EcoStruxure Power architecture.

This is a 3 poles basic frame for ComPacT NSX250B. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 25kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 105mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX250B is part of Schneider Electric EcoStruxure Power architecture.

Schneider Electric LC1D183BL apukosketin

This is a 3 poles basic frame for ComPacT NSX100B. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 25kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 105mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX100B is part of Schneider Electric EcoStruxure Power architecture.

This is a 4 poles basic frame for ComPacT NSX160B. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 25kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 140mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX160B is part of Schneider Electric EcoStruxure Power architecture.

This MicroLogic 2.2 is a 3 poles 3d electronic trip unit used on ComPacT NSX 250 circuit breakers. This 250A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. MicroLogic 2.2 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and ComPacT NSX basic frame.

This MicroLogic 2.3 is a 4 poles 4d electronic trip unit used on ComPacT NSX 400/630 circuit breakers. This 400A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. MicroLogic 2.3 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and ComPacT NSX basic frame.

This MicroLogic 2.3 is a 3 poles 3d electronic trip unit used on ComPacT NSX 400/630 circuit breakers. This 400A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. MicroLogic 2.3 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and ComPacT NSX basic frame.

Standard enclosure for surface mounting with 1 row and 8 modules, classified according to IP 65, without terminal block. The enclosure is pre-drilled for conduit or cable entry and made of light gray halogen-free plastic (RAL 7035).

This Acti9 iC60L is a low voltage miniature circuit breaker (MCB). It has 2P with 2 protected poles, rated current 10A and C tripping curve. Breaking capacity at 230VAC is 15000A according to EN 60898 and 50kA according to IEC 60947-2. Breaking capacity at 400VAC is 15000A according to EN 60898 and 25kA according to IEC 60947-2. This miniature circuit breaker is for protection against short circuit and overload currents in all applications. It has IP20 B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It has a longer service life thanks to its high limitation and fast closing. It offers VisiTrip for safety during maintenance and VisiSafe to reduce intervention time.

This Resi9 product is a modular residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole and 13A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The rated short-circuit breaking capacity is up to 6000A conforming to EN/IEC 61009-2-1 standard. This product protects against short-circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product complies with EN/IEC 61009-2-1 and EN/IEC 61009-1 standards. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. This circuit-breaker has a position contact indicator, and also has a ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 230VAC with operating frequency of 50Hz. The Ui rated insulation voltage is up to 400V. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 4. The dimensions are (W) 36mm x (H) 82mm x (D) 70.5mm. The product colour is white (RAL 9003). The product weight is 186g. The pollution degree is 2. The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. The wire stripping length is 13mm (top or bottom). According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in modu

This Acti9 product is a hybrid horizontal comb busbar 12 modules for bottom connection. It is dedicated to 3L+N installations. The type is NL1L2L3 (Line). It is a set of 1 device. It is suitable for 4 devices (3P+N). The length is 218mm.The total number of modules of 18mm is 12. The distance between each way is 54mm. The Ie rated operational current at 40°C is 80A. The Isc short circuit current is compatible with the breaking capacity of Schneider Electric circuit breakers. The Ui rated insulation voltage is 440VAC. The Ue rated operational voltage is 230VAC phase to neutral. The color of the device is white (RAL9003). The pollution degree is 3. According to IEC 60695-2-1 standard the fire resistance is self-extinguishing at 960°C within 30s. It complies with EN/IEC 60439-1 standard.