Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Supreme is an irreplaceable protective set that protects the screen and lens of your device during everyday use.

The tempered display is made of lightweight, milled glass, 0.3mm thick, with a 9H hardness rating. The crystal-clear glass ensures clear images, perfect color saturation, and doesn't affect touch sensitivity. Additionally, it's coated with a high-quality oleophobic coating that minimizes fingerprints and other contaminants.

A protective lens cover made of high-quality tempered glass with a 9H hardness. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, which makes installation very easy and accessible to literally anyone.

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Install the shell as evenly as you can - you can position it using the positioning frame from the kit.
4) Eliminate any air bubbles by pressing firmly in circular motions for several dozen seconds. Do this to ensure the adhesive bonds as strongly as possible to the screen.

The Tech-Protect Milaneseband features an elegant and modern design. Crafted from high-quality, skin-friendly stainless steel, it features a simple clasp mechanism that allows for easy adjustment of the strap length, making it suitable for a variety of wrist sizes.

Solid construction and high-quality materials make the strap durable and comfortable to wear, and add elegance to any smartwatch.

Tech-Protect FlexAir is the perfect combination of flexibility, durability and ergonomic design. The lightweight case made of durable TPU plastic effectively protects the device from scratches and minor damage, while maintaining the slim silhouette of the phone. The transparent design allows you to fully appreciate the original appearance of the smartphone without covering its design.

The case fits perfectly with the device, giving you full access to all external ports and features. The flexible material guarantees a secure grip, minimizing the risk of accidental falls. Raised edges around the screen and camera island protect the display and lenses from contact with flat surfaces.

FlexAir is the ideal solution for those who value comfort of use combined with reliable protection. Thanks to its anti-abrasion properties, the case will maintain an attractive appearance for a long time while protecting your equipment from everyday damage.

The soft and flexible Nylon Pro strap from the Tech-Protect brand is a great solution for active users.

The high quality of the material and the combination of two textile layers make the band extremely durable and resistant to shocks and impacts. It is perfect for cycling, exercising, traveling or other physical activities.

Comfortable to wear and skin-friendly strap, can be easily adjusted to the size of your wrist - the comfortable and secure fastening just slides into the appropriate loop.

Tech-Protect Glass Fit+ is a tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen, while maintaining full touch sensitivity.

The 9H hardness on a ten-point scale means that the glass can withstand contact with keys, coins and other sharp objects that you carry in your pocket every day. The thickness of only 0.3 mm practically does not change the profile of your smartphone and does not affect the responsiveness of the screen. The hardened material dissipates the force of the impact, protecting the display from cracks during falls.

The oleophobic coating minimizes the accumulation of fingerprints and makes it easier to keep the glass clean. Crystal clarity preserves natural colors and image sharpness without affecting the quality of the display. The glass design ensures compatibility with most available cases, so you can freely personalize the look of your phone.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum protection for the watch screen without compromise. The ultra-thin design of just 0.28 mm makes it virtually invisible yet extremely durable. The ceramic coating with a hardness of 7H effectively protects against scratches and pressure, while maintaining perfect clarity and full touch sensitivity of the screen.

The biggest advantage of Glass Flex+ hybrid glass is its resistance to cracking and shattering – unlike traditional tempered glass, it does not break into sharp shards in the event of an impact, which significantly increases the safety of use. The flexible design allows for a snug fit against the watch screen without creating air bubbles.

Tech-Protect Glass Flex+ is the ideal solution for active users who value reliable screen protection on a daily basis and during sports.

The Lamano Tech-Protect AirPods Case is a stylish and functional accessory that combines elegance with solid protection. Made of high-quality PC plastic, it effectively protects the headphones from scratches, falls and everyday damage, while maintaining a modern, eye-catching design.

Precise cutouts for the charging port and speaker give you full access to all functions without having to remove the case, and wireless charging compatibility allows for quick and convenient power delivery at any time.

The slim design perfectly adapts to the shape of the case, guaranteeing comfort of use and a secure grip. An additional advantage is the practical carabiner, thanks to which the case can be easily attached to your bag, backpack or keys - your headphones are always safe and at hand.

Tech-Protect Lamano AirPods are not only reliable protection, but also a fashionable accessory for people who value style, functionality and comfort. It will also be perfect as an elegant gift for lovers of modern accessories.

Equip your device with the innovative MagSafe wireless charging system!
Magmat is a special plate, compatible with MagSafe accessories, which will allow you to quickly and easily charge your phone and use the properties of magnets.

An additional advantage is the hassle-free installation. The set includes special mounting accessories, thanks to which the application is very easy and accessible to literally everyone.

The plate can be glued to the case and directly to the phone.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use.

The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use.

The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Tech-Protect Silicone Hook case is the perfect solution to protect your headphones. The elastic case has been perfectly matched and made of high-quality, scratch-resistant silicone.

The case is the epitome of minimalist design, while maintaining adequate protection of the device against scratches or falls.

In addition, the case is equipped with a practical carabiner that increases the range of possibilities of use - the headphones can be attached to a leash with keys or a loop in the pants, thanks to which falling or losing the set becomes almost impossible.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Place the mounting frame with the glass on the watch screen – the glass will be perfectly centered. Remove the protective film from the top of the glass, then press the glass with your finger in the center of the screen to begin the adhesion process.
4) Remove the mounting frame. Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Spy+ is the perfect solution for users who value the privacy and security of their data. The privacy technology used limits the visibility of the screen to outsiders, protecting against unauthorized access, which contributes to increasing the confidentiality of our conversations and messages.

The Tech-Protect Glass Spy+ also provides excellent protection for the display against scratches, bumps, and dents, ensuring that your phone stays in top condition for a long time. Its hardness level is rated by the manufacturer at 9H on a ten-point scale. It does not affect the touch sensitivity and saturation of the displayed colors. In addition, it is covered with a high-quality oleophobic coating, which minimizes the number of fingerprints left.

It is also worth noting the incredible smoothness of the touch, which affects the comfort of using the phone.
In addition, the easy installation procedure makes it affordable for anyone, even those who are inexperienced in glass installation.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Tech-Protect C4S strap is an elegant and functional accessory that is perfect for everyday use.

Equipped with an adapter that we place on the inside of the case, it allows you to carry your phone safely and comfortably.

The C4S can be used as a stylish phone lanyard, but it will also be great as an addition to keys or a backpack, adding a modern look to the whole.

*Two adapters are included

The Tech-Protect Silicone strap is an indispensable accessory for users who want to combine comfort and style. Made of high-quality TPU, it provides unparalleled durability and functionality.

Its lightweight design makes it extremely comfortable to wear on your wrist, even during intense physical activities.

The adjustable length allows it to be adjusted to individual preferences, ensuring a perfect fit on the wrist.

In addition, Silicone is extremely durable and resistant to everyday scratches and weather conditions. You don't have to worry about damage or unexpected events, because this strap will accompany you for a longer time, maintaining its durability and aesthetic appearance.

Tech-Protect MagFlex is a functional case with a colorful frame and transparent back - it exposes the original beauty of your phone while providing additional protection. The slim design makes the phone fit easily in your pocket, and at the same time does not interfere with texting, gaming or taking selfies.

Equipped with a magnetic ring compatible with MagSafe accessories, it givesyou the ability to wirelessly recharge your energy without having to remove the case from your phone. Now you can use charging anytime, anywhere, without any obstacles.

MagFlex also guarantees comprehensive protection for the camera on your phone. You don't have to worry about damage or scratches to the camera lens. Every photo you take will be clear, sharp and full of detail. No matter what conditions you find yourself in, you can be sure that your photos will always be perfect.

The Tech-Protect NC200W-GaN is a 200W AC charger that uses GaN (gallium nitride) technology to charge devices efficiently. With four ports, you can power your laptop, tablet, smartphone, and other accessories at the same time, making it a practical solution for those who work with multiple devices on a daily basis.

Equipped with three Type-C ports and one USB-A port with significant power, the charger offers unlimited possibilities. The two main Type-C ports can deliver 100W each at the same time, allowing you to charge two premium laptops at the same time in a flash. The Type-C3 port offers a robust 65W, perfect for ultrabook or Pro tablets, while the USB-A port delivers an impressive 60W with Super Charge support. All four ports can work simultaneously with intelligent power distribution.

An advanced power management system with Power Delivery and Quick Charge 3.0 protocols automatically optimizes charging parameters for each connected device, guaranteeing maximum speed and safety. The compact design makes the charger take up little space and looks good both at home, in the office or on the go. The Tech-Protect NC200W-GAN is absolute power in a compact form factor – the ideal charging station for the most demanding users.

The Tech-Protect Rugged Shield is a hybrid case that combines a durable flexible TPU frame with a matte polycarbonate back. The design provides maximum protection for your phone, while maintaining easy installation and comfort for everyday use.

Reinforced corners with cushioning technology absorb shocks during falls, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect against scratches and contact with surfaces when the phone is lying flat. The textured TPU sides provide a non-slip grip and prevent it from slipping out of your hand.

The matte finish on the back is resistant to fingerprints and debris, maintaining an aesthetic appearance for a long time. Precise cutouts allow full access to all ports, buttons and functions of the phone without having to remove the case.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect 5906302319657 matkapuhelimen suojakotelo 16 cm (6.3") Suojus Läpinäkyvä, Musta

The Tech-Protect Silicone Hook is a headphone case that combines stylish design with all-round protection. Made of high-quality soft silicone, it provides excellent protection against scratches, dust and minor mechanical damage. The matte finish gives the case an elegant, feminine feel.

The precise fit guarantees full protection of the case without restricting access to the charging port and LED light. The durable metal carabiner allows you to conveniently attach it to a backpack, purse, keys or trouser belt, minimizing the risk of losing the headphones during everyday use.

The soft silicone surface provides a firm grip and a pleasant to the touch finish. The case is fully compatible with wireless and wired charging, while maintaining the full functionality of the device. Easy to assemble and disassemble without the risk of damaging the charging case.

The Tech-Protect MagSlim MagSafe is a minimalist and ultra-thin case made of durable PC polycarbonate that perfectly combines protection with an elegant design. Thanks to its ultra-thin design, the case remains virtually invisible, without adding unnecessary weight or volume to your smartphone, while retaining its original slim silhouette.

The built-in magnetic ring ensures full MagSafe compatibility, while maintaining full access to wireless charging and a stable connection to magnetic accessories. The hard polycarbonate back effectively protects against scratches and mechanical damage, and at the same time provides an excellent grip. A precise fit ensures that the phone remains protected against accidental damage while maintaining full functionality.

The raised form around the camera and screen protects the most sensitive components from contact with a flat surface. The phone is lifted just above the surface, which minimizes the risk of scratches when placing the device. The minimalist design of the case allows you to fully enjoy the aesthetics of the device, emphasizing its original design.