Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Tech-Protect Neoprene Bag is the perfect solution for those looking for effective protection for their laptop. Made of high-quality neoprene foam, it combines softness with durability, providing reliable protection against scratches, minor shocks and daily wear and tear.

The inside of the cover has been carefully finished to protect the delicate surface of the laptop in all conditions. With its compact design and lightweight form, the case is not only practical but also convenient to transport, making it the perfect companion for both everyday and travel.

The Tech-Protect Neopren Bag is a combination of functionality, aesthetics and durability that will provide your device with maximum protection.

* Please read the dimensions of the cover before purchasing.

Tech-Protect Silicone Magsafe is an elegant and functional case made of soft, but at the same time durable thermoplastic, it perfectly combines protection and minimalism.

Thanks to its slim design, the case remains ultra-light, without adding unnecessary weight or bulk to your smartphone. It also retains full access to Magsafe's wireless charging feature, allowing you to take advantage of state-of-the-art solutions.

Perfectly fitted, the phone not only remains protected against accidental damage, but also fits better in the hand, ensuring a secure and stable grip. The minimalist design of the case will allow you to fully enjoy the aesthetics of your device without overwhelming it with additional details. The high-quality case combined with the internal microfiber finish provide the highest level of protection for the phone.

An additional advantage of the case is the slightly raised form around the camera and screen, thanks to which the most prone parts of the phone are properly protected from scratches. The phone is lifted just above a flat surface, which minimizes the risk of scratches when you place the device on hard surfaces.

The Tech-Protect Magring Magsafe case is an excellent choice for those who value functionality combined with elegance. This lightweight and perfectly fitting case is made of PC, TPU and a sleek aluminum frame that wraps around the edges of the camera, providing effective protection against damage.

The key element of the case is a movable ring that can be rotated 360 degrees, which allows it to be used in various ways – as a stand for comfortable watching movies, as a finger holder for a more secure hold of the phone, and as an element that supports the MagSafe function. Thanks to its MagSafe properties, it works perfectly with MagSafe accessories, such as chargers or magnetic holders.

Tech-Protect Magring Magsafe is a stylish and perfectly crafted product that not only protects your phone, but also adds a modern look to it. This is a practical solution that will certainly meet the expectations of even the most demanding users.

The elegant Tech-Protect Stainless panel bracelet is a unique accessory created for perfection and a perfect fit. Designed with attention to every detail, the strap is made of high-quality stainless steel, ensuring not only exceptional durability but also an elegant look.

The adjustable form allows you to adjust the length of the bracelet to your individual preferences, which is extremely practical for people with different wrist sizes.
The metal clasp of the bracelet guarantees a secure hold, and the sturdy construction and secure clasp mean that the user does not have to worry about accidentally losing their smartwatch.

The band is compatible with Apple Watch models (44 / 45 / 46 / 49 mm): 8 / 9 / 10 / 11, SE 1 / 2 / 3 series, Ultra 1 / 2 / 3 series.

The Tech-Protect A200 is an ergonomic solution for people who spend a lot of time in front of a computer. The pad is designed to provide maximum comfort and protect your wrists from overload.

The contoured gel wrist rest evenly distributes pressure, minimizing the risk of pain and fatigue in your hands during prolonged use. The surface of the pad made of smooth material ensures precise and smooth tracking of mouse movements, which increases comfort both in office work and while gaming.

The non-slip bottom keeps the pad stable on the desk, eliminating slipping even during heavy use. With compact dimensions of 25 × 22.5 cm, it is ideal for any workstation, even where space is limited.

The Tech-Protect Uniq case is a combination of modern design, high protection and full functionality. Made of flexible and durable silicone, reinforced on the inside, it provides maximum protection for the phone against drops, bumps, while remaining light and comfortable to use. The microfiber-lined interior effectively protects the back of the device from scratches, guaranteeing its impeccable appearance.

The non-slip surface guarantees a secure grip, minimizing the risk of the device accidentally falling out of your hand. A stylish aluminum finish around the lens adds elegance and enhances the modern character of the case.

With full MagSafe compatibility, the case allows for quick and convenient charging without having to remove the protection. Tech-Protect Uniq combines security, functionality and style, perfectly responding to the needs of people who value a modern look and full protection for their phone.

Tech-Protect Nylon is a durable strap, made of high-quality nylon. Its design ensures comfort and durability.

Solid metal finish, allows you to easily and securely attach the watch. The subdued and versatile design suits many outfits, both everyday and more formal.

Thanks to its flexibility and resistance to damage, Tech-Protect Nylon is the perfect choice for people who value both functionality and aesthetics.

The band is compatible with Apple Watch models (44 / 45 / 46 / 49 mm): 8 / 9 / 10 / 11, SE 1 / 2 / 3 series, Ultra 1 / 2 / 3 series.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free – without the risk of air bubbles and exposure to dust.

The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass.

Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1. Start installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass.

Done! Enjoy a perfectly applied screen protector.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free – without the risk of air bubbles and exposure to dust.

The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass.

Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1. Start installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass.

Done! Enjoy a perfectly applied screen protector.

Tech-Protect Magnecklace is a minimalist protective case with a lanyard that combines elegance, functionality and the highest quality of workmanship. Crafted with tactile TPU, the case keeps you light and thin while offering a high level of protection for your device.

Featuring a matte finish, it is perfectly matched to the phone, emphasizing its modern look. The raised edge around the lens provides additional protection for the camera from scratches and damage. Tech-Protect Magnecklace is fully functional, it does not restrict access to external ports, which allows you to use the device comfortably.

The case is compatible with MagSafe, which allows for fast and hassle-free wireless charging. In addition, it is equipped with an adjustable and detachable lanyard in the form of strings, which ensures the comfort of wearing and the safety of your phone.

Choose Tech-Protect Magnecklace to enjoy a stylish and functional case that perfectly protects your phone in any situation.

Tech-Protect Magnecklace is a minimalist protective case with a lanyard that combines elegance, functionality and the highest quality of workmanship. Crafted with tactile TPU, the case keeps you light and thin while offering a high level of protection for your device.

Featuring a matte finish, it is perfectly matched to the phone, emphasizing its modern look. The raised edge around the lens provides additional protection for the camera from scratches and damage. Tech-Protect Magnecklace is fully functional, it does not restrict access to external ports, which allows you to use the device comfortably.

The case is compatible with MagSafe, which allows for fast and hassle-free wireless charging. In addition, it is equipped with an adjustable and detachable lanyard in the form of strings, which ensures the comfort of wearing and the safety of your phone.

Choose Tech-Protect Magnecklace to enjoy a stylish and functional case that perfectly protects your phone in any situation.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free – without the risk of air bubbles and exposure to dust.

The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass.

Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1. Start installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass.

Done! Enjoy a perfectly applied screen protector.

Tech-Protect Kevlar MagSafe is an armored series of cases that will protect your device 360 degrees in all conditions. Designed with an advanced hybrid design, it's a perfect fit, lightweight, and extremely durable. The two-piece case combines hard armor on the back, made of PC (polycarbonate) coating and shock-resistant TPU, providing maximum protection while maintaining a slim profile.

Additional reinforcement in the corners in the form of protective airbags effectively absorbs any fall. The front of the device is wrapped in a frame with an integrated polycarbonate cover, which perfectly separates the display, protecting it from scratches. Raised edges to protect the lens and screen from damage, a non-slip finish and the ability to charge wirelessly are other advantages of Kevlar MagSafe equipment.

MagSafe compatibility makes using your device even easier and more convenient. You can charge your phone and use a variety of magnetic accessories without any problems. The functional kickstand is an easy-to-use foot that serves as both a stand that allows you to position the phone vertically and horizontally.

The Kevlar case is military certified, which means that the product has undergone specialized endurance tests and meets strict performance requirements in extreme conditions.

The set includes two front bezels – with or without built-in polycarbonate protective glass – which allows you to customize the case to your preferences and needs, depending on the situation.

Tech-Protect Glass SPY+ is a premium tempered glass with advanced privacy technology that protects your data from unauthorized access. A special privacy layer limits the visibility of the screen to outsiders looking from the side, so that the content displayed on your phone remains visible only to you. It's the perfect solution to protect the confidentiality of conversations and messages while traveling, working in public places, or everyday use.

The glass provides excellent protection for the display against scratches, bumps and dents thanks to its 9H hardness. It does not affect the touch sensitivity or color saturation, while maintaining the full functionality of the phone. The high-quality oleophobic coating minimizes the amount of fingerprints left behind, and the milled 2.5D edges ensure a smooth touch and comfort of use. The incredible smoothness of the surface has a positive effect on the comfort of everyday work with the phone.

The easy installation procedure makes the installation affordable for any user, even those who are inexperienced in putting on lenses. Perfect clarity preserves the original image display quality.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

The Tech-Protect Magmat MagSafe case combines elegant design with the highest level of protection. The hybrid design uses high-quality TPU and PC components, guaranteeing comprehensive protection for your smartphone.

The flexible frame made of polyurethane plastic perfectly absorbs impacts and protects the phone during falls, while the hard polycarbonate back effectively protects against scratches and mechanical damage. The transparent finish emphasizes the original appearance of the device, while maintaining its unique character.

The raised form of the housing around the camera and screen protects the most sensitive components from contact with a flat surface. The built-in magnetic ring ensures full compatibility with MagSafe technology, allowing for fast wireless charging and the use of magnetic accessories. Precise cutouts guarantee full access to all ports, buttons and speakers.

Meet the innovative Tech-Protect QI15W-A42 charger that combines style, functionality and versatility. The device is fully compatible with MagSafe technology, which guarantees a perfect fit and stable charging for devices with Apple technology. The A42 supports fast charging of Qi devices, offering power outputs: 5W, 7.5W, 10W or 15W (maximum) for smartphones, 5W (maximum) for TWS headphones and 2.5W for watches.

The compact design and foldable stand make the charger convenient to use and perfect for both home, office and travel. The included 1m USB-C cable ensures a reliable connection and ease of installation. With a sleek, brushed finish and minimalist look

The Tech-Protect QI15W-A42 blends perfectly into any interior, while offering comfort and reliability. Bet on modern charging and enjoy always ready equipment!

* MagSafe magnetic only works directly with your phone or on a case with a built-in MagSafe magnetic eye.
** To use the inductive charger to its full potential, we recommend connecting it to an AC charger with an output power of at least 35W

Lightweight yet extremely durable, the SmartCase Pen is designed for comprehensive device protection and maximum convenience. The robust, precisely fitted design fits perfectly to the case, providing stability, safety and effective protection against scratches and mechanical damage.

The matte finish gives the case a sleek, modern look while minimizing the appearance of fingerprints and dirt — so your device always looks aesthetically pleasing.

The SmartCase Pen is a combination of protection and functionality. The case can be easily transformed into a practical stand, ideal for watching movies and video calls, as well as for comfortable writing or drawing. An added bonus is a dedicated stylus slot that allows you to store it securely and access it at all times – always where you need it.

The Tech-Protect Silicone Hook is a headphone case that combines stylish design with all-round protection. Made of high-quality soft silicone, it provides excellent protection against scratches, dust and minor mechanical damage. The matte finish gives the case an elegant, feminine feel.

The precise fit guarantees full protection of the case without restricting access to the charging port and LED light. The durable metal carabiner allows you to conveniently attach it to a backpack, purse, keys or trouser belt, minimizing the risk of losing the headphones during everyday use.

The soft silicone surface provides a firm grip and a pleasant to the touch finish. The case is fully compatible with wireless and wired charging, while maintaining the full functionality of the device. Easy to assemble and disassemble without the risk of damaging the charging case.

The Lamano Tech-Protect MagSafe Case is a stylish accessory that combines elegance with character. Made of high-quality PC plastic, it effectively protects your phone from scratches and damage, while maintaining a slim and lightweight design.

The distinctive design gives the case a modern, predatory character – perfect for women who value fashion and individual style. It is not only protection, but also a fashionable accessory that attracts attention and emphasizes personality.

The raised bezel around the lens provides additional protection for the camera from chafing and accidental impacts, protecting the most sensitive component of the phone. The precise workmanship guarantees a perfect fit to the shape of the device, ensuring a comfortable grip and comfort of everyday use.

With full MagSafe compatibility, the case allows you to use magnetic accessories quickly and effortlessly without having to take them off. Easy assembly and disassembly make the Tech-Protect Lamano MagSafe a practical solution for those who value style and functionality – also a great choice as a gift.

Tech-Protect Bounce Pro is an advanced protective case that combines effective protection with multifunctionality. Made of durable, transparent silicone, it protects the charging case from scratches, bumps and everyday wear and tear, while maintaining the visibility of the original design of your headphones.

The magnetic closure with an improved safety lock design makes opening and closing the case even easier and more secure, protecting your headphones from accidental opening and dropping. Thanks to the stand function, you can conveniently place your phone in a horizontal position while watching movies or video calls.

Reinforced corners absorb impact during falls, protecting the case from damage. A practical lanyard with a carabiner is included, which allows you to attach the case to your keys, backpack or trouser belt, ensuring constant access to the headphones.

Tech-Protect Bounce Pro is an advanced protective case that combines effective protection with multifunctionality. Made of durable, transparent silicone, it protects the charging case from scratches, bumps and everyday wear and tear, while maintaining the visibility of the original design of your headphones.

The magnetic closure with an improved safety lock design makes opening and closing the case even easier and more secure, protecting your headphones from accidental opening and dropping. Thanks to the stand function, you can conveniently place your phone in a horizontal position while watching movies or video calls.

Reinforced corners absorb impact during falls, protecting the case from damage. A practical lanyard with a carabiner is included, which allows you to attach the case to your keys, backpack or trouser belt, ensuring constant access to the headphones.

Tech-Protect FlexAir is the perfect combination of flexibility, durability and ergonomic design. The lightweight case made of durable TPU plastic effectively protects the device from scratches and minor damage, while maintaining the slim silhouette of the phone. The transparent design allows you to fully appreciate the original appearance of the smartphone without covering its design.

The case fits perfectly with the device, giving you full access to all external ports and features. The flexible material guarantees a secure grip, minimizing the risk of accidental falls. Raised edges around the screen and camera island protect the display and lenses from contact with flat surfaces.

FlexAir is the ideal solution for those who value comfort of use combined with reliable protection. Thanks to its anti-abrasion properties, the case will maintain an attractive appearance for a long time while protecting your equipment from everyday damage.

Tech-Protect Bounce Pro is an advanced protective case that combines effective protection with multifunctionality. Made of durable, transparent silicone, it protects the charging case from scratches, bumps and everyday wear and tear, while maintaining the visibility of the original design of your headphones.

The magnetic closure with an improved safety lock design makes opening and closing the case even easier and more secure, protecting your headphones from accidental opening and dropping. Thanks to the stand function, you can conveniently place your phone in a horizontal position while watching movies or video calls.

Reinforced corners absorb impact during falls, protecting the case from damage. A practical lanyard with a carabiner is included, which allows you to attach the case to your keys, backpack or trouser belt, ensuring constant access to the headphones.

Tech-Protect FlexAir is the perfect combination of flexibility, durability and ergonomic design. The lightweight case made of durable TPU plastic effectively protects the device from scratches and minor damage, while maintaining the slim silhouette of the phone. The transparent design allows you to fully appreciate the original appearance of the smartphone without covering its design.

The case fits perfectly with the device, giving you full access to all external ports and features. The flexible material guarantees a secure grip, minimizing the risk of accidental falls. Raised edges around the screen and camera island protect the display and lenses from contact with flat surfaces.

FlexAir is the ideal solution for those who value comfort of use combined with reliable protection. Thanks to its anti-abrasion properties, the case will maintain an attractive appearance for a long time while protecting your equipment from everyday damage.