Housegard-hiilimonoksidihälyttimet reagoivat haitallisiin hiilimonoksidipitoisuuksiin, ja niitä suositellaan huoneisiin, joissa on polttoainekäyttöinen lämmönlähde tai muita laitteita. Soveltuu asennettavaksi omakotitaloon, mökille, asuntovaunuun tai esim. matkailuautoon, ja se on helppo ottaa mukaan matkoille tai lomille.

LCD-näytössä näkyy nykyinen hiilimonoksiditaso ja hälytystila. Hälytysmuistitoiminnon avulla voit katsoa, onko hälytys laukaistu viimeisten 48 tunnin aikana. Taukopainikkeella voit keskeyttää laitteen toiminnan 10 minuutiksi. Varoitus ilmoittaa, kun on aika vaihtaa akku.

CA107 täyttää uuden, tiukemman hiilimonoksidihälyttimiä koskevan standardin EN 50291-1:2018 vaatimukset, ja sen käyttöikä on 10 vuotta.

Nopea reagointi haitallisiin hiilimonoksidipitoisuuksiin.
Näytössä näkyy nykyinen CO-taso.
48 tunnin hälytysmuisti.
Helppo testi- ja taukotoiminto.
Mukana toimitettu akku kestää jopa 3 vuotta.
Ilmaisee, kun paristo on tyhjä ja hälytin on vaihdettava.

Housegard Origo™ on älykäs uuden sukupolven savuvaroitin. Origo™ on langaton sarjaan kytkettävä savu- ja lämpötilahälytin. Housegard Origo™ käyttää uusinta energiasäästötekniikkaa, mikä tarkoittaa jopa 18 kuukauden paristojen kestoa 2 AA-paristolle. Paikallistamistoiminto, testi- ja taukotoiminto: vilkkuva LED ilmaisee normaalin toiminnan, paristokotelon turvatoiminto: asennusta ei voida suorittaa ilman paristoja, sarjaan voidaa kytkeä jopa 30 varoitinta.

Mounting Clip for DIN rail moun af AP200 modules

The multi-criteria detector ESMI 22051TE photothermaldetector uses thermal assistance to the corephotoelectric smoke detector to give enhanced falsealarm immunity and faster response to a wide rangeof incipient fires.No build in isolator

Housegard Optical Smoke Alarm, Pebble 10, SA710 /601143

The EM210E input modules provide one contact monitoring circuits for supervision of devices external to the fire detection system.

5MP, 1/2.7" CMOS image sensor, low illuminance, high image definitionOutputs 2688×1520(2688×1520) @ 25/30 fps, andSupports max.5MP(2592×1944) @ 20 fpsH.265 codec, high compression rate, ultra-low bit rateBuilt-in IR LED, max IR distance: 60 mROI, SMART H.264/H.265, flexible coding, applicable to various bandwidth and storage environmentsRotation mode, WDR, 3D DNR, HLC, BLC, digital watermarking, applicable to various monitoring scenesIntelligent detection: Intrusion, tripwireAbnormality detection: Motion detection, video tampering, no SD card, SD card full, SD card error, network disconnected, IP conflict, illegal access, voltage detectionSupports max. 256 GB Micro SD card12V DC/PoE power supportIP67 protection

Conventional optical detector. Used on Esco and ABDL 231 panels.

Dorma Kaba Ed 100

The Intellia multisensor detector EDI-30 comprisesoptical smoke and thermistor temperature sensorswhose outputs are combined to give the finalanalogue value. As a result, the multisensor is usefulover a wide range of applications and is highlyimmune to false alarms.

EBE200-N Essentia Xpert8 mounting base

The ESMI 2251CTLE-W plug-in fire detector combines 4 separate sensing elements to act as a single unit. CO sensing for monitoring CO products from a smouldering fire, IR sensing for measuring ambient light levels and flame signatures, optical smoke detection and heat detection.

12MP, 1/1.7"CMOS image sensorMax output 12MP (4000×3000)@30fps3D DNR,AWB,HLC, BLC,ROI, SVC, SMART H.264/H.265People counting in multiple areas, queuing management in multiple areas, heat map (number of peole /time), and track map2/2 Alarm in/out, 1/1 audio in/out12V DC/POE power support IP67, IK10 protection

Addressable integrated siren base with isolator. Powered by the loop. Consumes only 5 mA. Can synchronize with other sounders on the loop. Two sound levels: 55-75 / 75-91 dB addressed with dil switch.

- High reliability of detection thanks to evaluation electronics- Active adjustment of the threshold (drift compensation) if the optical sensor becomes dirty- Activation of a remote external detector alarm display possible- Mechanical removal lock(can be activated/deactivated)- Dust-repellent labyrinth and cap construction

The MS2001 mounting boxes arerecommended in sites where moisture in theambient air can cause problems by the effect ofcondensation on the sensor.

Series 65 Optical Smoke Detector Series 65 incorporates a pulsating LED located inside the detector housing. It is identical to the ionization detector, but has an indicator LED, which is visible in the resting state, but generates a red light alarm. It is doing well in slow burning and smoldering fires. Suitable for bedrooms and escape routes. Unaffected by wind or atmospheric pressure Flashing LED and magnet operated test switch option

This is an/a ED standard arm for lintel depths of up to 225 mm, SI

Conventional sounder.Red.EN54-3.IP21.

Housegard-vesivuotohälytin antaa nopeasti hälytyksen vuotavasta vesijohdosta, pesukoneesta, astianpesukoneesta tms. Housegard-vesivahti hälyttää, kun se on kosketuksissa veden kanssa.

This is an/a ED slide channel arm for lintel depths of up to 60 mm, SI

Esmi addressable loop controller ALC2. Label: Esmi fire detection panels - range of product: Esmi fire detection panels - product or component type: loop controller - Range Presentation: Fire safety systems are a critical part of any business. Schneider Electric offer intelligent, innovative fire detection products that are user-friendly, modular, flexible, scalable and highly reliable.Esmi fire detection system grows easily with the site because of its modularity. Fire protection needs vary according to the level of protection desired, the use and purpose of the area covered, insurance company recommendations, the regulations imposed by fire and rescue officials, and the individual demands of the property owner. All Schneider Electric’s panels are CPR certified and comply with European standards EN54-2 and EN54-4. - Range Benefits: - cost-effective solutions - detectors for every need - simplified security operations - all-round service concept - easy installation - modulari

The ESMI 22051TLE multi-criteria, Photo Thermal, Infra Red (PTIR), detector is the environmentally friendly alternative to the ionisation detector. The “PTIR" offers comparable speed of response to the ionisation technology for a fast flaming fire and is less susceptible to false alarms. No build in isolator

4MP, 1/1.8 CMOS image sensor, low illuminance, high image definitionOutputs max. 4MP (2688 × 1520) @30 fps, 2MP(1920 × 1080) @60 fpsBuilt-in IR LED, max. IR distance: 40 m ROI, SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments Rotation mode, WDR, 3D DNR, HLC, BLC, digital watermarking, applicable to various monitoring scenes Intelligent detection: Tripwire, intrusion, fast moving (the three functions support the classification and accurate detection of vehicle and human), abandoned object, missing object, loitering detection, people gathering, parking detection, heat map, face detection, face attributes and people counting Supports max. 256 G Micro SD card, built-in Mic 12V DC/PoE power supply, ePoE network transmission over long distance, easy for installation IP67 protection

700 Series detectors continually monitor their own sensitivity and operational status. Once a day they perform a full diagnostic test that includes dynamically testing the sensing chamber and internal electronics. The DP721I is an optical smoke detector with field exchangable optical chamber and remote indicator output facilities. Automatic self diagnostics: Dynamic full detector and sensitivity testManual self diagnostic with visual sensitivity indicationField sensitivity testing without external metersField exchangeable and disposable optical chamberHigh false alarm immunityFloating background with drift compensationSeparate fire and fault LED12 - 24 VDC operationPolarity insensitiveFull range: optical, heat and optical/heat multi criteria sensorEN54 approved