Wera Työkalut - sivu 9

High quality Wera Micro screwdriver for precision mechanical jobs. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit.

Korkealaatuinen Wera Micro -ruuvimeisseli tarkkuusmekaanisiin töihin. Nopea kääntäminen saavutetaan kiinnittämällä käsi päähän ja käyttämällä nopeasti pyörivää aluetta juuri sen alla. Tämä tekee aikaa vievistä otteen säädöistä tarpeettomia. Voimavyöhykkeet, joissa on integroidut pehmeät osat, varmistavat suuren löysäämisen ja kiristysmomentin siirron; tarkkuusvyöhyke oikealle kiertokulmalle hienosäätötöissä. Mustapiste-kärki tarjoaa optimoidun korroosionkeston ja täsmällisen istuvuuden.

Tough viscous Wera bits for hexagon socket screws for universal use. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. ¼” hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

Ruuvitaltan kahva, 163.5 mm, 6.35 mm

High quality Wera Micro screwdriver for precision mechanical jobs. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit.

High quality bits out of stainless steel for Pozidriv* screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. ¼” hexagon, suitable for holders as per DIN ISO 1173-F 6.3. * Pozidriv = registered trademark of European Industrial Service Ltd.

Manual and power tool socket insert (ISO 2725-Part 3) by Wera allows applications both in manual as well as power tools. "Take it easy" Tool Finder with colour coding according to size - for simple and rapid accessing of the required tool. Featuring a good grip to allow easy pick-up even with oily hands. Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome-plated.

Interchangeable blade with reduced shaft diameter and integrated insulation protection; this means that low-lying screws and spring elements can be accessed and actuated. Individually tested tools as per IEC 60900. Individual test in water bath at 10,000 volts for secure work at the permissible voltage of 1,000 volts. The Wera Black Point tip offers a perfect fit and optimised corrosion protection.

Especially small bit-holding Stubby screwdriver handle with short blade for hard to reach areas. Suitable for the mounting of bits with ¼"
hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1.With strong permanent magnet, which also holds large and
heavy screws. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise
working. The hexagon anti-roll protection prevents annoying rolling away of bits in the workplace.

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous, for universal use. ¼” hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

VDE-terä Kraftform Kompakt VDE -kahvalle/vaihdettavalle teräjärjestelmälle nopeaa terän vaihtoa varten ilman erityistyökaluja. Yksilöllisesti testatut työkalut IEC 60900 -standardin mukaisesti. Yksittäistestaus vesikylvyssä 10 000 voltilla turvallista työtä varten sallitulla jännitteellä 1 000 volttia. Wera Black Point -kärki tarjoaa täydellisen istuvuuden ja optimoidun korroosionkeston.

Serie 300 XXL 2, Ruuvitalttasarja

Wera 8740 A HF 1 Pistorasia

High quality Wera Micro screwdriver for precision mechanical jobs. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit.

High quality Wera Micro screwdriver for precision mechanical jobs. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit.

Non-magnetic design. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

Nutsetter for hexagon head screws
1/4" hexagon drive
Non-magnetic design
Metric

Korkealaatuiset ruostumattomasta teräksestä valmistetut bittit urauraisille ruuveille. Wera Stainless -bittit on valmistettu ruostumattomasta teräksestä, mikä estää epämiellyttävän ylimääräisen ruosteen muodostumisen. ¼” kuusikulmainen, sopii pidikkeisiin DIN ISO 1173-F 6.3 mukaisesti.

High quality bits for recessed TORX® screws. Ballpoint: the ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling “round the corner” screwdriving. Tough viscous for universal use. ¼” hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

Wera 05050210001 ruuvimeisselin teräkotelo 25,4 / 4 mm (1 / 4") 1 kpl

Torque wrench, 6.35 mm, 2, 12 N·m

Wera 05053457001 ruuvimeisselin teräkotelo Ruostumaton teräs 25,4 / 4 mm (1 / 4") 1 kpl

Series 900 932/918, Ruuvitalttasarja, 6 osat, sisässä (in) lokerikko

Wera 895/4/1 K ruuvimeisselin teräkotelo 25,4 / 4 mm (1 / 4") 1 kpl

Wera 05060198001 talttaterä 1 kpl

Wera 05073421001 hylsy & hylsysarja Pistorasia