Viega - sivu 15

Viega 3815

Raxofix T-piece with SC-Contur- silicium bronze- press connectors.

Bottom valve 1 1/2'' with plug. Chrome plated.

Sanpress Inox Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing elementd1: 28, d2: 18

T-piece - copper - solder connection.

Screw fitting- gunmetal- R-thread, Rp-thread- conical sealing

Profipress G Coupling with SC-Contur- copper - press connectors Components HNBR sealing elements d: 35

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Easytop Ball valve with SC-Contur- for water- and heat meter- not suitable for Easytop Insulating shell 2275.90- press connection, G-threadComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, black powder-coated actuating lever made of metal, EPDM sealing element, EPDM flat seal.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test mark DN: 20, d: 22, G: 34

Reducer- gunmetal- R-thread, Rp-threadComponentsPolygonR: 212, Rp: 112

T-piece - copper - solder connection.

T-piece- gunmetal or silicon bronze- Rp-threads

Viega 1117.2

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 20, d2: 16, d3: 20

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, Rp-threadd: 32, Rp: 1

Raxofix Coupling with SC-Contur- Silicium bronze - press connection d1: 40, d2: 40

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Nipple- gunmetal- G-threadG: 12

Screw fitting- gunmetal- Rp-thread- conical sealing

Plug- gunmetal- R-threadComponentsQuadraticR: 38

Viega 3241

Viega 3092

Viega 2626.1

Viega 2626.1

Viega 2426.1