Viega - sivu 20

Profipress T-piece with SC-Contur- copper- press connectorsComponentsEPDM sealing elements d1: 22, d2: 15, d3: 22

Crossover- copper- soldered connectiond: 22(quality seal for d12-54)

Pitkä nänni- asemetalli- R-kierre

Viega 1115.1

Viega 2416.1

Pitkä nänni- asemetalli- R-kierre: 12, L: 100

Viega 2316

Viega 2212

Viega 2212

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Reducer- gunmetal- R-thread, Rp-thread- round

PP connection pipe Ø50 mm x 1 1/2". For sink with plug. White.

Viega 1116.1

Raxofix Adapter with SC-Contur- silicium bronze- press connection, Rp-threadd: 16, Rp: 34

Viega 2616.1

Vähentäen kytkentää - kupari - juotettu yhteys d1: 22, d2: 18 (laatuleima d12-54)

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 35, d2: 28, d3: 35

Easytop Ball valve with SC-Contur- press connection, Rp-threadsComponents Valve casing in gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, stainless steel ball, actuation lever T-form with medium marking green/red exchangeable, EPDM sealing element.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °C with DVGW-test markDN: 15, d: 18, Rp: 12

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon.

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 25, d2: 20, d3: 20

Viega 2616

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, Rp-threadComponentsEPM sealing element, VdS certificationd: 22, Rp: 34

Viega 2426.1

Pitkä nippa asemetallista R-kierroksella. R: 34, L: 150 mm.