Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, Rp-threadComponentsEPM sealing element, VdS certificationd: 22, Rp: 34

Viega 2315.1

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 20, d2: 16, d3: 20

Raxofix Adapter with SC-Contur- for all Viega metallic systems- silicium bronze- press connectorsComponentsEPDM sealing elementd1: 20, d2: 22

Raxofix Wall plate with SC-Contur- silicium bronze- press connection, Rp-threadd: 16, Rp: 12

T-piece- gunmetal or silicon bronze- Rp-threads

Viega 5318

Viega 2315.5

Viega 1126.1

Gemini mounting unit - Solder connection, Rp-threads Components - short gunmetal elbow, galvanised steel (flat) mounting bracket d: 15 mm, Rp: 12, depth gauge: 150 mm

Viega 1112.1

Viega 1115.1

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 2416

Viega 1115.1

Viega 1111

Viega 1115.5

Viega 1115

Viega 4212

Viega 1126

Viega 1126.1

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 22, Rp: 34, d2: 22

Prestabo T-piece with SC-Contur- galvanised non-alloyed steel- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 42, d2: 22, d3: 42

Long nipple- gunmetal- R-thread

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread Components EPDM sealing element, polygon, VdS certificationd: 28, R: 34