Viega - sivu 4

Kyynärpää 90° - kupari - juotettu liitos, pistokepää: 12 (laatuleima d12-54:lle)

Viega 2312

Viega 2311

Sanpress Inox Coupling with SC-Contur- steel non-corroding - press connectorsComponents EPDM sealing elements d: 54(VdS certification)

Sanpress Inox Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, VdS certificationd1: 54, d2: 42

Easytop Insulating shell Suitable for Easytop CRV slanted seat valve 2138, 2238, 2238.1, 2238.3, 2238.5, 5338, 5338.5, Easytop Inox CRV slanted seat valve 2338, 2338.5, Easytop Inox Slanted seat valve 2337, 2337.5, Easytop Slanted seat valve 2137, 2237, 2237.1, 2237.3, 2237.5, 5337, 5337.5- self-lockingComponentsInsulating layer thickness according to EnEVDN: 32

Easytop Ball valve with SC-Contur- press connectorsComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, actuation lever T-form with medium marking green/red exchangeable, stainless steel ball, EPDM sealing elements.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test markDN: 15, d: 18

Viega 2212.1

Viega 2215.5

Sanpress Coupling with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elementsd: 35

Sanpress Reducer with SC-Contur- gunmetal or silicium bronze- plug-in end, press connectionComponentsEPDM sealing elementd1: 42, d2: 35

Viega 2218

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elements d1: 15, d2: 15, d3: 15

Long nipple- gunmetal- R-thread

Screw fitting- gunmetal- R-thread, Rp-thread- conical sealing

Viega 2415.1

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Plug-in piece - gunmetal - plug-in end, Rp-thread.

Viega 2415.3

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

T-piece - copper - solder connection.

Prestabo adapter with SC-Contur- galvanised non-alloyed steel- press connection, Rp-thread

Long nipple- gunmetal- R-threadR: 12, L: 80

Viega 2416

Kyynärpää 45° - kupari - juotettu liitos, pistokepää: 15 (laatuleima d12-54)