Viemäröinti - sivu 12

Wavin PP bend 30° 200mm

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

PEH-osia hitsattavaksi käytetään jätevesijärjestelmissä. Niissä on TPE-äänenvaimennus.

Kohotettu osa yksisuuntainen lattiakaivo

48041022 Asennussarja vinyyli lattiakaivoille puurakenteisiin

Valurautainen Purus 50 mm lattiakaivo ruostumattomalla teräsritilällä.

Wafix PP -järjestelmä on valmistettu uudelleenkäytettävästä PP:stä (polypropeenista), mikä antaa sekä putkille että liittimille hyvät fysikaaliset ja kemialliset ominaisuudet. Käytetty PP-materiaali on korkean E-modulin omaavaa, mikä antaa putkille hyvän pituusjämeyden ja suuren iskunkestokyvyn. Siksi Wafix PP -järjestelmälla kestää iskuja ja tärähdyksiö, jotka voivat tapahtua asennuksen ja käytön aikana - jopa miinusasteissa. Wafix PP on täydellinen viemäröintijärjestelmän putki- ja liitinvalikoima seuraavissa mitoissa: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110mm Ohjelma sisältää myös valkoisen version mitoilla 32, 40 ja 50mm erityisesti näkyviin asennuksiin sopivaksi. Järjestelmän ainutlaatuinen Fix·lock® tiivistysrengas tiivistyy jopa kolmessa pisteesssään tarjoamalla suuren rakennuspinnan putkea vasten varmistaen että liitokset ovat aina 100% tiiviitä. Se tarjoaa lisäturvallisuutta jos haluat sijoittaa tai piilottaa putket kaivoon tai muuhun tilaan.

Can be freely positioned against the back wall, independent of any side walls. The rear flange has been moved 6 mm backwards, to fit 6 – 20mm wall tiles + tile mortar + wetroom membrane.

NB! Only for HighLine Custom frameless.

Complete floor drain against rear wall 1000 mm, 10 mm frame, Column grate, 75 mm vertical outlet housing

Water trap for corner outlet houses 2001.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile).

The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame.

The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

The grating is selected from among six attractive designs.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Flex frames are used to extend the floor drain’s visible length. They are laid endto-end to the frame, using tile mortar, so there is no need to cut small pieces of tile.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

HighLine Panel, Cassette or Custom must be selected.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Flex frames are used to extend the floor drain’s visible length. They are laid endto-end to the frame, using tile mortar, so there is no need to cut small pieces of tile.

Flex frames are used to extend the floor drain’s visible length. They are laid endto-end to the frame, using tile mortar, so there is no need to cut small pieces of tile.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

For shower cubicles without fixed walls.

The drain unit has four floor flanges.

Including four heght-adjustable feet (40-190 mm).

ShowerLine has a built-in slope, so that the floor in the shower cubicle slopes correctly by 2% down towards the floor drain. For added wetroom safety, the shower cubicle is framed by flanges on three sides.

The shower screen is mounted in the track on the fixed module, to eliminate the risk of working loose over time.

Combine with: Outlet unit, frame, grating/panel and shower screen.

Geberit sähköfuusiotarra kiinnityspisteelle: D=50 mm, D1=58 mm.

Geberit 367.115.16.1 viemäri-, jäte- & ilmaputken sovite

Putkiston hajulukko - pesualtaalle - muoviosat Joustava viemäriputki, jätevesiletkuliitäntä G: 112, L: 500, DN: 40/50

The set consists of a cassette, rail, heightener set and screws. The set must be assembled before installation. Available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile). Supplement cassette with your own material (e.g. matching floor tile), to complete the solution. The cassette solution is placed directly inside the drain unit. The rail is specially designed to provide a snug fit.