Viemäröinti - sivu 29

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with top made of 4 mm solid stainless steel. Inserts ensure precise positioning in the fitting. HighLine Panel is sold separately.

The frames are available in 4 heights: 10, 12, 15 and 25 mm.

NB! Choose a frame height (H) that matches the thickness of the tile layer. The tile layer consists of the tile itself + approx. 2 – 8 mm tile adhesive. The thickness of the tile adhesive depends on the thickness, size and material of the tile.
If you have any questions about the thickness of the tile layer, please contact your tiler or tile supplier.

NB: PVD-treated surface.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

Complete square drain set. Package includes ClassicLine Column grating and frame 15×15 cm, steel drain unit, flow guide, water trap, outlet unit Ø 75 mm horizontal with side inlets, 3 x adapters (2 pcs. for 40 mm pipes and 1 pc. for 32 mm pipe). The height of the unit can be adjusted +/- 10 mm and rotated 360° in the outlet unit. Truncate the ClassicLine frame to tile level. Minimum tile layer 8 mm. Cleaning cloth included.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile).

The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame.

The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

The grating is selected from among six attractive designs.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Four height-adjustable feet (120-220 mm) for installation on concrete.

The set consists of a cassette, rail, heightener set and screws. The set must be assembled before installation. Available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile). Supplement cassette with your own material (e.g. matching floor tile), to complete the solution. The cassette solution is placed directly inside the drain unit. The rail is specially designed to provide a snug fit.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

ShowerLine has a built-in slope, so that the floor in the shower cubicle slopes correctly by 2% down towards the floor drain. For added wetroom safety, the shower cubicle is framed by flanges on three sides.

The shower screen is mounted in the track on the fixed module, to eliminate the risk of working loose over time. Combine with: outlet unit, frame, grating/panel and shower screen.

Rakennusten viemäröinti, Tontin viemäröinti

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

With side drain on the left.

Can be freely positioned against the back wall, independent of any side walls. Only for use with ClassicLine.

With side drain on the right.

Can be freely positioned against the back wall, independent of any side walls. Only for use with ClassicLine.

Wafix PP -järjestelmä on valmistettu uudelleenkäytettävästä PP:stä (polypropeenista), mikä antaa sekä putkille että liittimille hyvät fysikaaliset ja kemialliset ominaisuudet. Käytetty PP-materiaali on korkean E-modulin omaavaa, mikä antaa putkille hyvän pituusjämeyden ja suuren iskunkestokyvyn. Siksi Wafix PP -järjestelmälla kestää iskuja ja tärähdyksiö, jotka voivat tapahtua asennuksen ja käytön aikana - jopa miinusasteissa. Wafix PP on täydellinen viemäröintijärjestelmän putki- ja liitinvalikoima seuraavissa mitoissa: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110mm Ohjelma sisältää myös valkoisen version mitoilla 32, 40 ja 50mm erityisesti näkyviin asennuksiin sopivaksi. Järjestelmän ainutlaatuinen Fix·lock® tiivistysrengas tiivistyy jopa kolmessa pisteesssään tarjoamalla suuren rakennuspinnan putkea vasten varmistaen että liitokset ovat aina 100% tiiviitä. Se tarjoaa lisäturvallisuutta jos haluat sijoittaa tai piilottaa putket kaivoon tai muuhun tilaan.

AMAX Pro, is a drain in PP for drainage systems in buildings for transporting sewage.

PEH-osia hitsattavaksi käytetään jätevesijärjestelmissä. Niissä on TPE-äänenvaimennus.

dBlue on kolmikerroksinen PP (polypropeeni) viemäriputki. Se sopii asennettavaksi paikkoihin, joissa vaaditaan melutasoa. Putkijärjestelmällä on todistettu äänitaso 19 dB (A). Jos äänivaatimukset ovat tiukempia, suosittelemme FRIAPHON:ia.

HighLine Color on valmistettu PVD-käsitellystä ruostumattomasta teräksestä. Runko on yhdistettävä paneeliin.

ClassicLine ritilä - linja - ruostumaton teräs, harjattu: Anniversario, 1000 mm. ClassicLine Anniversario on ritilä, joka julkaistiin unidrain®'n 10-vuotisjuhlan kunniaksi vuonna 2013. Juhlaritilä tuo klassisen ritilän lähemmäs yksinoikeudellista HighLine-sarjaa ja se on valmistettu harjatusta ruostumattomasta teräksestä, joka sopii kehyksen kanssa yhteen.

AMAX Pro on PP-viemäriputki rakennusten viemäröintijärjestelmiin jäteveden kuljettamiseksi.

AMAX Pro on PP-viemäriputki rakennusten viemäröintijärjestelmiin jäteveden kuljettamiseksi.

AMAX Pro on PP-viemäriputki rakennusten viemäröintijärjestelmiin jäteveden kuljettamiseksi.