Viemäröinti - sivu 40

Flex frames are used to extend the floor drain’s visible length. They are laid endto-end to the frame, using tile mortar, so there is no need to cut small pieces of tile.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Siirtyminen Jo-Flex 11/4 nännistä 40 mm: iin.

AMAX Pro on PP-viemäriputki rakennusten viemäröintijärjestelmiin jäteveden kuljettamiseksi.

Geberit fixing point tape 90mm, t / weld, pe

With union nut, with angled hose connector d40mm G1 1/2 white alpine

Wavin PVC transition 200mm, for concrete sleeve

The set consists of a cassette, rail, heightener set and screws. The set must be assembled before installation. Available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile). Supplement cassette with your own material (e.g. matching floor tile), to complete the solution. The cassette solution is placed directly inside the drain unit. The rail is specially designed to provide a snug fit.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Runko Unidrain 1500 1200/8 mm.

Wafix PP -järjestelmä on valmistettu uudelleenkäytettävästä PP:stä (polypropeenista), mikä antaa sekä putkille että liittimille hyvät fysikaaliset ja kemialliset ominaisuudet. Käytetty PP-materiaali on korkean E-modulin omaavaa, mikä antaa putkille hyvän pituusjämeyden ja suuren iskunkestokyvyn. Siksi Wafix PP -järjestelmälla kestää iskuja ja tärähdyksiö, jotka voivat tapahtua asennuksen ja käytön aikana - jopa miinusasteissa. Wafix PP on täydellinen viemäröintijärjestelmän putki- ja liitinvalikoima seuraavissa mitoissa: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110mm Ohjelma sisältää myös valkoisen version mitoilla 32, 40 ja 50mm erityisesti näkyviin asennuksiin sopivaksi. Järjestelmän ainutlaatuinen Fix·lock® tiivistysrengas tiivistyy jopa kolmessa pisteesssään tarjoamalla suuren rakennuspinnan putkea vasten varmistaen että liitokset ovat aina 100% tiiviitä. Se tarjoaa lisäturvallisuutta jos haluat sijoittaa tai piilottaa putket kaivoon tai muuhun tilaan.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile).

The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame.

The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

The grating is selected from among six attractive designs.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Can be freely positioned against the back wall, independent of any side walls. The rear flange has been moved 12 mm backwards, to fit 15 -20mm wall tiles + tile mortar + wetroom membrane.

NB! ClassicLine or HighLine frame must be used.

ShowerLine has a built-in slope, so that the floor in the shower cubicle slopes correctly by 2% down towards the floor drain. For added wetroom safety, the shower cubicle is framed by flanges on three sides.

The shower screen is mounted in the track on the fixed module, to eliminate the risk of working loose over time. Combine with: outlet unit, frame, grating/panel and shower screen.

Choose between two models. A panel completely without frame, or the model with panel including frame.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

MAGE DUO liittimet valurautaputkille, jätevesikäyttöön. Runko kromi-nikkeli terästä. Kumitiiviste EPDM:ää. Ei paineistettuihin järjestelmiin. Max lämpötila 80°. Ei maahan asennukseen sopiva. Kiinnitys kahteen ruuviin.

Jätevesiputkisto GM-X, galvanoitu taivutus DN 50, 45 astetta.

Jet RAPID liitin viemärijärjestelmään. Jet RAPID -liittimessä on 1 pultti. Ruostumattomasta teräksestä valmistettu kansi. Sisällä EPDM-kumi.

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

NB: PVD-treated surface.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.