Sähkökeskustarvikkeet - sivu 48

iC60N - pienoisjännitekatkaisija - 1P - 2A - B-käyrä

TeSys GV2 - Sulakekatkaisija - magneettinen - 14 A - ruuviliittimet

iC60N - pienoisvirtakytkin - 3P - 20A - D-käyrä

Montagegreb NH P215592

NH3 500A GL/GG 500V sulake

[7825300454]

Siemens 3RV2917-4B virtakiskon osa ja tarvike

interface plug-in relay - Zelio RSB - 1 C/O - 12 V DC - 12 A

Schneider Electric LC1D18B7 apukosketin

Schneider Electric A9C23712 apukosketin

Siemens 5SY6306-7 virrankatkaisin 3

Siemens 5SY4110-7 luokittelematon

Handle knob. Mounting directly to the switch, no shaft needed. Padlockable in off-position. Black, 40 mm. Fits OT16...125F3/F4 og OT16...40F6/F8

iC60N - pienoisjännitekatkaisija - 3P - 2A - C-käyrä

Siemens 7KT5807 sähköinen ajastin

iC60N - pienoisvirtakytkin - 3P - 13A - C-käyrä

TeSys GV3 - Sulakekatkaisija - magneettinen - 40 A - EverLink BTR-liittimet

Kampa-kiskojen yhdistäminen - Helppo leikata - Acti 9 tasapainotettu 4-napainen 24 moduulia 100A

Zelio RSB are a series of compact plug-in relays with a width of only 16 mm.The relays are available with 1 C/O with either 12 and 16A or 2 C/O contacts with 8A maximum load.It is possible to insert a protection module (diode, varistor or RC-circuit) into the relay socket if needed.The sockets RSZE1S35M and RSZE1S48M has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RSB2A080BDPV is a complete plug-in relay mounted into a RSZE1S48M socket with a maintaining clamp, which secure that the relay stays in the socket even in an environment with vibrations.The socket has a blocking diode for protection against reversed polarity.The diode module has also a build-in LED for indication of supply to the relay.RSB2A080BDPV has 2 C/O AgNI contact with a maximum load of 8A.The relay has a lifetime of 100.000 cycles (depending on load).Supply voltage to the RSB2A080BDPV is 24 VDC and average coil consumption is 0,45W.Minimum switching curr

Siemens 3RT2016-1BB41 luokittelematon

Siemens 3RV2901-1E virrankatkaisimen lisävaruste

kääntölohko LU2M - 32 A - 24 V DC - suora asennus

sitop ups1600 10 a katkoton virtalähde syöttöjännite: 24 V DC lähtöjännite: 24 V DC/10 A

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE08P is a socket with separate push-in terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.The RGZE08P fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm2 and there is a integrated test point built into the socket.For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.The socket is marked with both NEMA and IEC markings.

This MicroLogic 2.2 is a 4 poles 4d electronic trip unit used on ComPacT NSX 160/250 circuit breakers. This 160A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. MicroLogic 2.2 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and ComPacT NSX basic frame.