Schneider Electric - sivu 13

TeSys LE - suljettu DOL-käynnistin - 9 A - 230 V AC-kela

Schneider Electric XALD144 sähkökytkimen lisävaruste Kahva

Schneider Electric GV2MCK04 sähköliitäntöjen suojakotelo IP55

Schneider Electric LC1D09V7 apukosketin

Schneider Electric RM17JC00MW luokittelematon

iC60N - pienoisjännitekatkaisija - 1P + N - 6A - B-käyrä

TeSys D - aikaviiväapukosketinlohko - 1NO + 1NC - ruuviliittimet

TeSys D kääntökontaktori - 3P(3 NO) - AC-3 - <= 440 V 9 A - 24 V AC-kela

TeSys D lämpötilan ylikuormitussuojausreleet - 0,16...0,25 A - luokka 10A

Schneider Electric XB4

TeSys LE - kotelo DOL-käynnistimelle - ilman painikkeita

TeSys GV2 - Sulakekatkaisija - termomagneettinen - 6...10 A - ruuviliittimet

kytkin-erotin VBF - 3 - 690 V 25 A - lukittava musta kahva

musta täydellinen valitsin kytkin Ø22 2-asento pysyvä 1NO+1NC

Schneider Electric A9F07216

Schneider Electric A9F04101

vihreä painonappipää Ø22 jousipalautuksella, merkitsemätön

Kytkin-katkaisija iSW 4P 63A jännite 415VAC luokka AC22A leveys 72mm

Schneider Electric TeSys D control relay sähkörele Valkoinen

Schneider Electric A9C20132 apukosketin

socket RPZ - mixed contact - 16 A - < 250 V - screw clamp - for relay RPM2..

Climasys Simple Thermoso C (NA Vent.) - Climasys-yksinkertainen Thermoso C (NA-venttiili)

Säädelty SMPS, 1 tai 2 vaihe - 100..240 V AC - 24 V 20A

This Acti9 electrical auxiliary is a modular OC and fault contact. The 2 contacts (2 NO/NC) can report the signalling information of the associated device to a programmable logic controller. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 2 position switches with contacts type 2 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC and fault contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC60 and iID double terminals residual current circuit breaker (RCCB). The OC and fault contact is installed for only Acti9 ranges such as iID, iDPN Vigi, iSW-NA, ARA, iC60 and RCA devices which includes 2 changeover contacts. If there is no comb busbar, it is also compatible with iC40, iC40 ARC, iCV40, iCV40 Vigi ARC. The iSD+OF is either used for device short name or compatibility code. The mechanical indicator is provided on the product for signalling (Local). It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 90mm x (D) 73mm. The product colour is white

Schneider Electric XB5