Schneider Electric - sivu 14

Schneider Electric XB4 Nappi

Ulostuloritilä muovia, leikattu 125x125mm kokoisena, ulkomitat 137x117mm, IP54.

valitsinkytkimen kanta Ø22 3-asentoinen pysyvä Ronis 455

musta täydellinen valitsin kytkin Ø22 3-asento jousipalautus 2NO

Lt-in LED indicator allows for easy monitoring of the relay status. Zelio RSL Slim -releet ovat Zelion valikoiman kompakteimpia pistorasiareleitä. Niiden leveys on vain 6,2 mm, mikä säästää arvokasta tilaa paneelin DIN-kiskolla. RSL-releet ovat saatavilla joko kokonaisena yksikkönä tai erillisenä releenä ja pistorasiana. Sisäänrakennettu LED-merkkivalo mahdollistaa helpon releen tilan seurannan.

This Acti9 electrical auxiliary is a modular OC and fault contact. The 2 contacts (2 NO/NC) can report the signalling information of the associated device to a programmable logic controller. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 2 position switches with contacts type 2 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC and fault contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC60 and iID double terminals residual current circuit breaker (RCCB). The OC and fault contact is installed for only Acti9 ranges such as iID, iDPN Vigi, iSW-NA, ARA, iC60 and RCA devices which includes 2 changeover contacts. If there is no comb busbar, it is also compatible with iC40, iC40 ARC, iCV40, iCV40 Vigi ARC. The iSD+OF is either used for device short name or compatibility code. The mechanical indicator is provided on the product for signalling (Local). It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 90mm x (D) 73mm. The product colour is white

Säädelty SMPS, 1 tai 2 vaihe - 100..240 V AC - 24 V 20A

Schneider Electric NSYS3D6420P

Schneider Electric ATV320D15N4B taajuusmuuttaja Musta

iC60N - pienoisjännitekatkaisija - 2P - 13A - C-käyrä

Joystick-ohjain Ø22 2-suuntainen jousipalautus 1NO suuntaa kohden.

Tummanharmaa tyhjä kotelon kansi, jossa on vaaleanharmaa pohja - 3 leikkausta - UL/CSA-sertifioitu

musta Ø40 sienen muotoinen painikepää Ø22 lukitseva kääntövapautus

yksittäinen kontaktipalikka rungolla/kiinnityskauluksella, 2NC ruuvipuristinliitin

musta valitsinpään Ø22 3-asentoinen jousipalautus

Spacial S3D tasainen ovi kiinnityslevyllä. H300xL400xS150 IP66 IK10 RAL7035.

Schneider Electric Linergy DX sähköliitäntöjen suojakotelo

Schneider Electric XB5

Residual current module 3P + N, 40A, 30mA, Class A. A fault current Vigi iC40 module is an add-on module for Acti9 iC40 type of circuit breakers. The result is optimum protection of humans, installations and electrical devices against over-currents, fault, an electric shock by direct and indirect contact, transients and fire hazard. This Vigi iC40 fault current module is 3 pole, marked to 40A, 400V and has a sensitivity of 30mA. The unit has test button on the front and is equipped with Schneider Electric's patented VisiTrip TM technology, which ensures rapid troubleshooting with clearly marked on the front. The module is 90 mm wide and easy mounting of clips on a DIN rail with automatic fuse.

iC60N - pienoisvirtakytkin - 3P + N - 6A - C-käyrä

Schneider Electric ZA2BS834 luokittelematon

Schneider Electric ZB5 Nappi

Schneider Electric XALK01TH26 laitteiston kiinnityssuoja 1 kpl Muovi

Schneider Electric ZB4

Pienikokoinen plug-in-rele - Zelio RXM - 2 C/O - 230 V AC - 12 A - LED-valolla.