Viega 2218

Sanpress Coupling with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elementsd: 22

Viega 2212

Sanpress Sliding coupling with SC-Contur- gunmetal or silicium bronze- press connectors ComponentsEPDM sealing elements, VdS certificationd: 42

Viega 2212

Viega 2215

Viega 2234

Viega 2612

Viega 2215XL

Viega 2612

Viega 2212.1

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Viega 2226.1

Viega 2225.5

Viega 1116

Viega 2315.1

Profipress Cap with SC-Contur- copper - press connection Components EPDM sealing elements

Viega 1126.1

Prestabo T-piece with SC-Contur- galvanised non-alloyed steel- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 54, d2: 22, d3: 54

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

T-piece - copper - solder connection.

PP connection pipe Ø50 mm x 1 1/2". For sink with plug. White.

Inlet, drains and overflows in acc. with DIN EN 274 for bathtubs and shower trays. Mechanical and electronic equipment, design versions and accessories.Well-thought-out building services for simple mounting.Drain and overflow casing made of PP (polypropylene) with the best features for domestic waste water.Award-winning design versions for individual bathroom configuration.Multiplex Trio E mixer unitsElectronic fittings for use with Multiplex Trio or Rotaplex Trio drain and overflows.Control elements for water flow can be placed anywhere.Displays for showing important functions.WLAN function for remote control via App.All model variations can be combined with electronically actuated Multiplex and Rotaplex drain valves.Multiplex Trio/Rotaplex TrioDrain and overflows for bathtubs, with water flow through the overflow unit.For bathtubs with drain hole Ø 52/90 mm.Electronically actuated drain valves in combination with Multiplex Trio E mixer units possible.Multiplex Trio FDrain and overflows for bathtubs, with water flow through the drain.Multiplex/RotaplexDrain and overflows for bathtubs, with drain hole Ø 52/90 mm.TempoplexDrains for flat shower trays with drain hole Ø 90 mm.Flat models for renovations.Tempoplex Plus for wellness showers with particularly high drainage capacity.

Viega 3240