Thermal Grizzly - sivu 2

Thermal Grizzly Duronaut is a high-performance thermal paste designed for excellent heat transfer and long-term stability.

Key features:
✔ Extremely durable
✔ High thermal conductivity
✔ Non-conductive & safe for electronics

Package includes:

1x Duronaut thermal paste 6g
1x Applicator
1x TG Spatula
1x TG Spatula Pro
 

Thermal Grizzly esittelee WireView GPU:n, laitteen joka mittaa PCI-laajennuskorttien ja plug-in-korttien virrankulutusta. Laite on kehitetty yhteistyössä Jon "elmor" Sandströmin kanssa. Samalla adapterin U-muotoinen muotoilu mahdollistaa optimaalisen kaapelinhallinnan siistin kaapelijärjestelyn saavuttamiseksi.Mitä WireView GPU tekee?WireView GPU mahdollistaa PCI-laajennuskorttien ja plug-in-korttien virrankulutuksen mittaamisen ja tallentamisen datan avulla. Tätä dataa voidaan käyttää muun muassa grafiikkakortin energiakustannusten määrittämiseen tai vertaamaan virrankulutusta muihin grafiikkakortteihin - ja se näyttää vain hienolta! - 2 x 8-Pins PCI-E - käänteinen suunta

Thermal pad with extremely high thermal conductivity and outstanding compressibility, electrically non-conductive and easy to apply for efficient heat transfer in electronic components.

The Minus Pad Pro builds on the proven Minus Pad 8 to deliver improved thermal performance and surface conformity, making it suitable for SSDs, GPU coolers, water-cooling blocks, voltage regulators and memory modules.

• Excellent thermal conductivity


• Outstanding compressibility for better surface contact


• Electrically non-conductive


• Easy to use and install


• Designed for use with SSDs, GPUs, water coolers and electronic components


• Part of the Minus Pad Basic, Advance and Pro series; further developed from Minus Pad 8

Gray material adapts to uneven surfaces to improve contact between components and heatsinks for more reliable heat transfer.

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity


• High compressibility


• Easy to use


• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.


• Minus Pad Advance: Improved thermal conductivity, higher compressibility.


• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

Thermally conductive gap filler to replace GPU thermal pads, with an operating temperature range of -40°C to +120°C.

TG Putty is a thermally conductive compound intended for GPU applications, offered in multiple sizes and performance variants.

• Replaces standard GPU thermal pads to bridge uneven surfaces


• Operating temperature: -40°C to +120°C


• Available contents: 30 g and 100 g


• Available variants: Basic, Advance, Pro


• Datasheet and technical information available for download

Ensures reliable thermal contact across gaps to support heat transfer between GPU components.

Lämpöäjohtava sovitinpala (thermal pad), punaruskea (pakkaus sisältää 2)

CPU contact frame for LGA 1851 (Intel 200 series). Can help improve cooling performance with better contact between CPU and cooler.

 Included in the package:

• 1x Intel 1851 CPU Contact Frame V1
• 4x Cylinder head screws with 3/8" UNC threads
• 1x 5/64" hex key
• 1x Torx T20 key

CPU-kontaktikehys Intel 13th gen Raptor Lake & 14th gen Raptor Lake-S, voi auttaa parantamaan jäähdytyksen suorituskykyä paremman kosketuksen avulla CPU:n ja jäähdyttimen välillä - katso asennusvideo ennen asennusta.

Suorittimen jäähdytyslevyn tahna, hopea

Thermal putty is an electrically non-conductive, flexible gap filler that replaces conventional thermal pads on GPUs and bridges height differences from 0.2 to 3.0 mm.

Formulated for GPU modifications, TG Putty is easy to shape for precise contact with VRAM and SMD components and can be applied broadly with a spatula or formed by hand.

• Electrically non-conductive alternative to thermal pads


• Fills gaps from 0.2 to 3.0 mm for consistent contact


• Apply with spatulas or by hand (gloves recommended)


• Available in variants with different thermal conductivities


• Operating range −40°C to +120°C


• Not suitable for use on processors (IHS or direct die) or directly on the GPU die

Easy to shape and tailor-made for memory and voltage-regulator contacts, it simplifies GPU pad replacement and cooler modifications.

Water cooler optimized for Intel LGA1851 direct-die mounting with a nickel-plated copper microfin cold plate, low-flow-resistance jet channels and integrated RGB lighting.

The Intel 1851 Mycro Direct-Die Pro RGB V1 is designed to sit directly on a delidded Intel CPU to send heat straight into the water loop, with an acrylic-and-aluminum cover and controllable ARGB illumination.

• Direct-die installation for LGA1851 CPUs — requires removal of the ILM and CPU heatspreader; delidding is at your own risk


• Nickel-plated copper cold plate with microfins and a jet system, engineered for low flow resistance


• Acrylic layer tempered after milling to prevent stress cracks beneath the anodized aluminum lid


• Digital aRGB LEDs under the lid, controllable via a 3-pin ARGB header (+5V/DATA/GND); LEDs also illuminate the G1/4 fittings


• G1/4-inch female threading for standard fittings


• Tested with KryoSheet and thermal pads — additional pad thickness affected contact pressure and showed no significant temperature improvements

Built for users who want a compact direct cooling path from the CPU die into a water loop while retaining customizable RGB lighting.

Grease spatula (pakkaus sisältää 3)

Kapton Insulation Sheet is a polyamide film that can be used at high temperatures up to 280 degrees Celsius and acts as an assembly aid for electrically conductive thermal interface material (TIM). It is ideal for covering components such as SMDs on a CPU or GPU if they are to be used with Conductonaut liquid metal, Carbonaut or KryoSheet.

Brief Informations:

• 50 adhesive strips 10x60mm
• Thickness of 40µm
• Electrically insulating
• Max Temp: 280°C
• Breakdown voltage: Over 1 kV
• Clean the adhesive surface beforehand!

Scope of delivery

• 10x carrier foil with  5 Kapton Insulation Sheets each
   

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity


• High compressibility


• Easy to use


• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.


• Minus Pad Advance: Improved thermal conductivity, higher compressibility.


• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

Lämpötahna, Thermal Grizzly Duronaut Pro 6g, yhdistää erinomaisen lämmönjohtavuuden, äärimmäisen pitkäaikaisstabiilisuuden, sähköä johtamattomuuden eikä se kovetu ajan myötä vaativiin PC- ja teollisiin jäähdytysjärjestelmiin.

Sen erityisesti kehitetty silikoniöljy, alumiinimikrojauhe ja sinkkioksidinanopulveri auttavat minimoimaan pump-out-ilmiön, parantamaan tarttuvuutta pintaan ja vähentämään lämpökontaktivastusta.

Pakkaus sisältää Duronaut Pro 6g, levittimen, TG Spatula ja TG Spatula Pro tehokkaaseen levitykseen ohuina levityskerroksina.

Ihanteellinen pelaajille, ylikellottajille ja vaativiin jäähdytyskokoonpanoihin, jotka tarvitsevat kestävää ja tehokasta lämmönsiirtoa CPU:n ja jäähdyttimen välillä.

Lämpöäjohtava sovitinpala (thermal pad), punaruskea

Aeronaut thermal grease is the ideal beginner's product with high effectiveness. Great surface protection, as well as good heat transfer capabilites make Aeronaut the ideal choice for users who want to optimize their cooling solution in an effective way, or maybe want to use an alternative to the thermal grease included with their hardware, with a remarkable cost effectiveness to boot.

• very good thermal conductivity
• long-term durability
• no curing
• no electrical conductivity

Thermal pad for component cooling combines a highly elastic, adaptable surface with medium thermal conductivity, high compressibility and electrical insulation.

Thermal Grizzly minus pad 8 is designed to compensate for small gaps between components and support constant heat transfer with a flexible ceramic silicon formula complex and nano aluminum oxide composition.

• Electrically insulating
• Easy to process and apply
• High compressibility
• Flammability rated V-0
• RoHS-compliant

A practical thermal interface solution for reliable heat transfer in electronic component assemblies.

Lämpöäjohtava sovitinpala (thermal pad), punaruskea

Short back plate for AM5 motherboard, for mounting AM4 coolers with custom retaining kit on AM5, made from black anodised aluminium

Lämpötahna

Thermal Grizzly Duronaut is a high-performance thermal paste designed for excellent heat transfer and long-term stability.

Key features:
✔ Extremely durable
✔ High thermal conductivity
✔ Non-conductive & safe for electronics

Package includes:

1 × Duronaut thermal paste 2 g
1 × Applicator
1 × TG Spatula
1 × TG Spatula Pro

Thermal Grizzly esittelee WireView GPU:n, laitteen joka mittaa PCI-laajennuskorttien ja plug-in-korttien virrankulutusta. Laite on kehitetty yhteistyössä Jon "elmor" Sandströmin kanssa. Samalla adapterin U-muotoinen muotoilu mahdollistaa optimaalisen kaapelinhallinnan siistin kaapelijärjestelyn saavuttamiseksi.

Mitä WireView GPU tekee?WireView GPU mahdollistaa PCI-laajennuskorttien ja plug-in-korttien virrankulutuksen mittaamisen ja tallentamisen datan avulla. Tätä dataa voidaan käyttää muun muassa grafiikkakortin energiakustannusten määrittämiseen tai vertaamaan virrankulutusta muihin grafiikkakortteihin - ja se näyttää vain hienolta!

- 1 x 12VHPWR -> 3 x 8-Pins PCI-E - käänteinen suunta

Thermal Grizzly esittelee WireView GPU:n, laitteen joka mittaa PCI-laajennuskorttien ja plug-in-korttien virrankulutusta. Laite on kehitetty yhteistyössä Jon "elmor" Sandströmin kanssa. Samalla adapterin U-muotoinen muotoilu mahdollistaa optimaalisen kaapelinhallinnan siistin kaapelijärjestelyn saavuttamiseksi.

Mitä WireView GPU tekee?WireView GPU mahdollistaa PCI-laajennuskorttien ja plug-in-korttien virrankulutuksen mittaamisen ja tallentamisen datan avulla. Tätä dataa voidaan käyttää muun muassa grafiikkakortin energiakustannusten määrittämiseen tai vertaamaan virrankulutusta muihin grafiikkakortteihin - ja se näyttää vain hienolta!

- 1 x 12VHPWR -> 3 x 8-Pins PCI-E - normaali suunta

Thermal Grizzly TG Shield on korkean lämpötilan konformaalipinnoite, joka suojaa komponentteja nestemäisen metallin oikosulkuilta. TG Shield kuivuu nopeasti ja tarjoaa luotettavan suojan PC-komponenteille yhdessä nestemäisen metallin kanssa.