Työkalut putkitöihin

KNIPEX 97 99 906 Lajitelmalaatikot eristetyillä pääteholkeilla

KNIPEX 86 01 300 Pihtiavain Pihdit ja avain samassa työkalussa pinnoitettu liukumisen estävällä muovilla fosfatoitu harmaaksi 300 mm

Li­Ion PLUS technology. Highly resistant Li­Ion 14.4 V Powerful and light. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power.

KNIPEX 86 01 250 Pihtiavain Pihdit ja avain samassa työkalussa pinnoitettu liukumisen estävällä muovilla fosfatoitu mustaksi 250 mm

KNIPEX 97 53 04 itsesäätyvät puristuspihdit päätehylsyille sivusisäänviennillä monikomponentti kahvakuorilla kiillotettu ruskeaksi 180 mm

KNIPEX 97 52 36 PreciForce® Kutistuspihdit monikomponentti kahvakuorilla kiillotettu ruskeaksi 220 mm

Tongue and groove pliers, 125 mm, enimmäisavaukset: 27 mm

KNIPEX 00 11 06 Yleisavain tavanomaisiin kaappeihin ja sulkujärjestelmiin 90 mm (Piikkipakkauskortti/muovipakkaus)

KNIPEX 82 02 200 TwinGrip Edestätarttumispihdit monikomponentti kahvakuorilla fosfatoitu mustaksi 200 mm

KNIPEX 00 11 01 TwinKey® Sähkökaapin avain tavanomaisiin kaappeihin ja sulkujärjestelmiin 92 mm

KNIPEX 97 21 215 Kutistuspihdit monikomponentti kahvakuorilla mustaksi lakattu 230 mm

KNIPEX 97 99 910 Lajitelmalaatikot eristämättömillä päätehylsyillä

KNIPEX 86 04 100 BK Pihtijakoavain XS Pihdit ja avain samassa työkalussa kohokuvioitu karkea pinta kromattu 100 mm

KNIPEX 86 09 180 V01 Suojusleuat tuotteeseen 86 XX 180 3 kpl kussakin

KNIPEX 86 02 180 Pihtiavain Pihdit ja avain samassa työkalussa monikomponentti kahvakuorilla fosfatoitu harmaaksi 180 mm

KNIPEX 97 99 908 Lajitelmalaatikot Twin-päätehylsyille

Ridgid 117 miniputkileikkuri

KNIPEX 87 21 300 Cobra® QuickSet Hightech-vesipumppupihdit pinnoitettu liukumisen estävällä muovilla fosfatoitu harmaaksi 300 mm

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

REMS Akku-Press 22 V ACC Basic-Pack
Electro-hydraulic battery radial press with automatic return and press pressure monitoring for the production of press joints for all common press fitting systems.
Li-Ion 22 V Technology.
Pipe press joints Ø 10 – 108 (110) mm, Ø 3/8 – 4"
"M" press 12 - 54 mm

With automatic return and press pressure monitoring.
Anti-vibration system.
Safe pressing result in a few seconds.
Automatic locking of the press bar.
Battery Li-Ion 21.6 V, 2.5 Ah for approx. 200 presses of Viega Profi press DN 15 per battery charging.

For operation of REMS press bars/press rings and for suitable press bars/press rings of other makes.
Rotatable press bar attachment with automatic lock.
Electro-hydraulic drive with powerful battery motor 21.6 V, 380 W.
Anti-vibration system.
Safety switch.
LED work lamp.
Battery Li-Ion 21.6 V, 2.5 Ah, fast charger Li-Ion 230 V, 50 – 60 Hz, 90 W

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

Robust quality tools for cutting tubes. Particularly suited for cutting stainless steel tubes.Copper tubes, thin-walled stainless steel tubes, thin-walled steel, aluminium, brass tubes Ø 6 – 35 mm Ø 18 – 138REMS RAS Cu-INOX – the compact version with telescopic spindle.

Light, portable compact machine. Universal for cutting and deburring pipes. For trade and industry. For the building site and the workshop.Stainless steel pipes of pressfittingsystems, carbon steel, copper Ø 8 – 108 mmSteel pipes EN 10255 (DIN 2440) DN 10 – 100 Ø 14 – 4, Ø 14 – 115 mmCast iron pipes (SML) EN 877 (DIN 19522) DN 50 – 100Plastic pipes SDR 11 Wall thickness s 10 mm Ø 10 – 110 mmMultilayer composite pipes Ø 10 – 110 mmREMS Cento – Cutting and deburring up to Ø 115 mm. Super fast. Right angled. Chip-free. No outer burr. Dry cutting. Universal for many pipe types.

KNIPEX 86 03 300 Pihtiavain Pihdit ja avain samassa työkalussa pinnoitettu muovilla kromattu 300 mm

KNIPEX 97 21 215 C Kutistuspihdit monikomponentti kahvakuorilla mustaksi lakattu 230 mm