Työkalut putkitöihin - sivu 2

KNIPEX 81 11 250 Sifon- ja liitinpihdit pinnoitettu liukumisen estävällä muovilla fosfatoitu mustaksi 250 mm

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

KNIPEX 86 03 400 Pihtiavain XL Pihdit ja avain samassa työkalussa pinnoitettu muovilla kromattu 400 mm

Leikkuri, 150 litran putkisto

Hand pressure test pump with manometer, p = 60 bar/6 MPa/870 psi, for pressure and tightness testing of pipe systems and containers up to 60 bar/6 MPa/870 psi. Corrosion-resistant, powder-coated steel container for 12 l volume. 1.5 m high-pressure hose with 12" connection. In carton.

KNIPEX 87 21 250 Cobra® QuickSet Hightech-vesipumppupihdit pinnoitettu liukumisen estävällä muovilla fosfatoitu harmaaksi 250 mm

KNIPEX 85 51 250 C Letkunsidepihdit klikattaville letkusiteille pinnoitettu liukumisen estävällä muovilla fosfatoitu harmaaksi 250 mm

Proven hand unit for quick application to remove pipe blockages in kitchen, bath, toilet.For pipes Ø 20–50 (75) mm. For cables Ø 6, 8, 10 mm.REMS Mini-Cobra – by hand or electric.Indispensable to remove small blockages.

REMS Frigo 2 F Zero. Electric tube freezer with closed refrigerant circuit. For steel, copper, plastic and plastic pipes with metallic insert Ø 1/8–2", Ø 10–60 mm. Cooling unit 230 V, 50 Hz, 430 W, 2 coolant hoses, 2 clamping bands, spray bottle. Equipment for Ø 1/4"–1 14", 15–42 mm. In stable steel cabinet. Internal refrigerant: R290.

KNIPEX 97 61 145 A Puristuspihdit johdinpääteholkkeihin pinnoitettu muovilla 145 mm

Universal, handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pressing joints Ø 10–108 mm / 3/8 - 4. Complete range of REMS pressing tongs/pressing rings for all common pressfitting systems.REMS Akku-Press ACC Li-Ion – universal up to Ø 108 mm / 4.With automatic circuit control and electronic service control. Secure crimping in seconds. Automatic locking of pressing tongs

REMS pressing tongs MiniVery compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.

KNIPEX 88 01 250 SB Alligator® Vesipumppupihdit pinnoitettu liukumisen estävällä muovilla fosfatoitu mustaksi 250 mm (Piikkipakkauskortti/muovipakkaus)

Powerful, easy-to-operate electric tool for threading with unique support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.Pipe threads 18 – 114, 16 – 40 mm Bolt threads 6 – 30 mm, 14 – 1Set includes Die heads R 12 - 34 - 1 - 114REMS Amigo – the smallest, lightest, strongest and fastest up to 114.

REMS cutter wheel St for steel pipes, cast iron pipes (SML)

Powerful, electric pressure testing pump for pressure and tightness tests of piping systems and receptacles. Testing and pressure range p 60 bar/6 MPa/870 psi. Pumping capacity 6.5 l/min water, hydrous solutions, emulsions, ph-value of liquids 7-10, temperature of liquids 60°C, viscosity of liquids 1.5 mPa s.REMS E-Push 2 – electric charging and testing. Up to 60 bar. With adjustable pressure limiting. 1300 W. Self sucking.

KNIPEX 90 31 02 SB TubiX® putkileikkuri 180 mm (Piikkipakkauskortti/muovipakkaus)

Pyörä, leikkuri e4546 105/205 hd

KNIPEX 87 02 300 Cobra® Hightech-vesipumppupihdit monikomponentti kahvakuorilla fosfatoitu harmaaksi 300 mm

KNIPEX 87 21 250 SB Cobra® QuickSet Hightech-vesipumppupihdit pinnoitettu liukumisen estävällä muovilla fosfatoitu harmaaksi 250 mm (Piikkipakkauskortti/muovipakkaus)

Ridgid rp-219 leuka 19 kn v28

KNIPEX 97 53 09 itsesäätyvät puristuspihdit päätehylsyille etusisäänviennillä monikomponentti kahvakuorilla kiillotettu ruskeaksi 190 mm

KNIPEX 87 02 250 Cobra® Hightech-vesipumppupihdit hoikilla monikomponentti kahvakuorilla fosfatoitu harmaaksi 250 mm

REMS Solar-Push K 60. Electric filling and flushing unit for easy and quick filling, flushing and venting of closed systems. In carton. Transport performance = 36 l/min., container volume 30 l. With centrifugal pump, temperature resistant for constant load = 60°C. Shipping pressure = 5.5 bar/0.55 MPa/80 psi. Condenser motor 230 V, 50 Hz, 860 W. 2 pcs. flexible, transparent woven PVC hoses 1/2" T60, each 3 m long, temperature resistant = 60°C.

Bahco 302-35 putken ja letkun leikkuulaite