Rems Työkalut putkitöihin

Rems Battery Nano Li-ion 12V 2.5AH

LiIon PLUS technology. Highly resistant Li-Ion 12V battery with 2.5 Ah capacity for long service life. Powerful and light. Total discharge and overload protection with single cell monitoring. Temperature monitoring during the charging process. Operating temperature range –10 to +60 °C. No memory effect for maximum battery power.

301,13 € (239,94 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Crimping pliers Mini M15 578312

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

145,96 € (116,30 €)

Tukkurilla, 4-7 arkipäivää toimitukseen

Rems Crimping pliers Mini M22 578316

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

140,45 € (111,91 €)

Tukkurilla, 4-7 arkipäivää toimitukseen

Rems Crimping pliers Mini V22 578334

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

147,60 € (117,61 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Crimping pliers Mini HE32 578370

REMS pressing tongs MiniVery compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.

281,64 € (224,41 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Accu-press ACC Li-ion 14.4V

Universal, handy electric tool with automatic circuit control for producing pipe pressing joints for all common pressfitting systems. For battery and corded operation. Pressing joints Ø 10–108 mm / 3/8 - 4. Complete range of REMS pressing tongs/pressing rings for all common pressfitting systems.REMS Akku-Press ACC Li-Ion – universal up to Ø 108 mm / 4.With automatic circuit control and electronic service control. Secure crimping in seconds. Automatic locking of pressing tongs

1 428,69 € (1 138,40 €)

Tilaustuote, toimitusaikaa ei voida ilmoittaa

Rems Crimping pliers Mini G 32

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.

288,00 € (229,48 €)

Tilaustuote, 12-15 arkipäivää toimitukseen

Rems Deburr REG 10-54 inox

Robust quality tool for removing outer and inner burr from pipes. Stainless steel pipes, other steel pipes, copper, brass, aluminium, steel, plastic pipes Ø 10–54 mm, Ø 1/2–2 1/8.REMS REG 10-54 – the multiple edge up to Ø 54 mm

79,38 € (63,25 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Pipe scissors ROS P 42 S

Handy quality tools for clean, fast pipe cuts. For thin-walled pipes also. Sturdy aluminium design. For single-hand operation.Plastic pipes, multi-layer composite tubes Ø 42 mm Ø 158

96,07 € (76,55 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Pipe cutter cu-inox 3-28mm 113240 R

Robust quality tools for cutting tubes. Particularly suited for cutting stainless steel tubes.Copper tubes, thin-walled stainless steel tubes, thin-walled steel, aluminium, brass tubes Ø 3 – 28 mm Ø 18 – 118Cutting wheel:4327920515 REMS RAS Cu-INOX – for places with difficult access.

49,70 € (39,60 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Pressing pliers Mini up 16

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

198,27 € (157,98 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Crimping pliers Mini up 25

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

198,27 € (157,98 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Crimping pliers Mini up 32

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948).High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process.With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

207,48 € (165,32 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Pliers M54 570170

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

573,00 € (456,57 €)

Tukkurilla, 4-7 arkipäivää toimitukseen

Rems Charger 10.8-18V Ni-Cd/Li-ion 65W

Rapid charger Li-Ion/Ni-Cd 230 V, 50 – 60 Hz, 65 W

231,00 € (184,06 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Deburrer REG 8-35

Robust quality tool for removing outer and inner burr from pipes.Stainless steel pipes, other steel pipes, copper, brass, aluminium, steel, plastic pipes Ø 8–35 mm, Ø 3/8–1 3/8.

68,25 € (54,38 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Pipe support herkules 3B

Height-adjustable material support with ball guide for rotating and stationary pipe and rod material. For crafts and industry. For construction sites and workshops. Pipe Ø (1/8) 1 – 6", Ø (6) 25 – 150 mm. Rod material Ø (6) 25 – 150 mm REMS Herkules – the strong support.

401,40 € (319,84 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Cutting head 3/8" 521020

Proven technology, high-grade material and precise machining of die head, dies and cover form a unit and ensure an excellent start-cutting performance and easy threading. No stalling of dies. Long, precise pipe guidance for perfect pipe centering. The chip holes which become wider at the outside enable good chip flow and clean threads. Pipe threads R tapered, right-hand ISO 7-1, EN 10226 (DIN 2999, BSPT)

175,20 € (139,60 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Crimping pliers Mini V35 578604

High performance cropping tongs in forged and specially hardened steel for cutting threaded rods.Steel, stainless steel up to strength class 4.8 (400 N/mm2) M 6 – M 10, UNC 3/8.REMS cropping tongs Mini – cuts threaded rod in just 2 seconds.Made of forged and specially hardened steel.Reversible cropping inserts for double service life.Cropping inserts with high precision thread contour machined on CNC production centres for exact guiding of the threaded rod in the cutting process. Plier parts, cropping inserts and specially machined and hardened cutting edges, made to fit exactly, for cutting without burr.Cutting device in pliers design (Patent EP 1 459 825, Patent US 7,284,330). Very compact design and low weight of the REMS Mini cropping tongs due to special arrangement of the cropping tongs connection (Patent EP 2 347 862).

196,10 € (156,26 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Crimping pliers Mini TH20 578358

High compression pressing tongs/pressing rings in forged and specially hardened steel. Pressing contours of REMS pressing tongs/pressing rings are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC & REMS Mini-Press 22V ACC drive units. Read and follow the installation and assembly instructions of the system provider/manufacturer.

201,04 € (160,19 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Crimping pliers Mini V15 578328

REMS pressing tongs Mini Very compact design and low weight of the REMS Mini pressing tongs due to special arrangent of the pressing tongs connection (Patent EP 1 952 948). High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer. Traceability according to EN 1775:2007 REMS pressing tongs Mini with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the g after the pressing process. This enables the user to check again whether the most suitable pressing tongs have been used to make the pressfit connection even after the pressing process. With this traceability REMS fulfils the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

152,00 € (121,12 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Crimping pliers M28 570140

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

136,57 € (108,82 €)

Tukkurilla, 4-7 arkipäivää toimitukseen

Rems Mini cobra pipe cleaner 170010

Proven hand unit for quick application to remove pipe blockages in kitchen, bath, toilet.For pipes Ø 20–50 (75) mm. For cables Ø 6, 8, 10 mm.REMS Mini-Cobra – by hand or electric.Indispensable to remove small blockages.

199,76 € (159,17 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Rems Pressing pliers up 25

REMS pressing tongs High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour. Hence far closer tolerances compared to as cast pressing contour.Drive through all REMS radial presses (except REMS Mini-Press ACC) and suitable radial presses of other makes. Read and follow the installation and assembly instructions of the system provider/manufacturer.Traceability according to EN 1775:2007 REMS pressing tongs/pressing rings with pressing contour M, V, SA, B, RN and UP have worked a specific marking into the pressing contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.With this tracability REMS fulfills the recommendations of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

211,80 € (168,77 €)

Tilaustuote, toimitusaikaa ei voida ilmoittaa

Rems Crimping pliers Mini BMP 5/8"

High compression pressing tongs in forged and specially hardened steel. Pressing contours of REMS pressing tongs are system-specific and correspond with the respective pressfitting system. Thus perfect system-conformity, safe press jointing. Pressing jaws of pressing tongs manufactured on CNC production centres ensure high-precision machining of pressing contour.Drive through REMS Mini-Press ACC drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer.

234,45 € (186,81 €)

Tukkurilla, 3-6 arkipäivää toimitukseen

Maanantai - Perjantai	10.00 - 16.00
Lauantai, sunnuntai & Tanskan pyhäpäivät:	Suljettu
Huom! Suljettu perjantaina 5.6.2026
Ota meihin yhteyttä

Rems Työkalut putkitöihin - sivu 3

Rems Battery Nano Li-ion 12V 2.5AH

Rems Crimping pliers Mini M15 578312

Rems Crimping pliers Mini M22 578316

Rems Crimping pliers Mini V22 578334

Rems Crimping pliers Mini HE32 578370

Rems Accu-press ACC Li-ion 14.4V

Rems Crimping pliers Mini G 32

Rems Deburr REG 10-54 inox

Rems Pipe scissors ROS P 42 S

Rems Pipe cutter cu-inox 3-28mm 113240 R

Rems Pressing pliers Mini up 16

Rems Crimping pliers Mini up 25

Rems Crimping pliers Mini up 32

Rems Pliers M54 570170

Rems Charger 10.8-18V Ni-Cd/Li-ion 65W

Rems Deburrer REG 8-35

Rems Pipe support herkules 3B

Rems Cutting head 3/8" 521020

Rems Crimping pliers Mini V35 578604

Rems Crimping pliers Mini TH20 578358

Rems Crimping pliers Mini V15 578328

Rems Crimping pliers M28 570140

Rems Mini cobra pipe cleaner 170010

Rems Pressing pliers up 25

Rems Crimping pliers Mini BMP 5/8"