Ancel Työkalut

Ancel BZ700 is a professional OBD2 scanner optimized for Mercedes-Benz, Sprinter and Smart vehicles with 16-pin ports, while supporting most cars (1996+). It reads and clears DTCs across engine, transmission, ABS, SRS, TPMS, lighting, fuel and brake systems. Includes service routines like oil reset, transmission adaptation, DPF regeneration, injector coding, AdBlue reset, EPB and battery registration. 2.8″ backlit LCD, Auto VIN, multilingual menus (15 languages) and free lifetime updates.

Ancel X6 is a professional automotive OBD2 diagnostic scanner with a 10.1-inch dust- and drop-resistant display. Running on Android 7.8, it offers full vehicle system diagnostics and 10 reset functions including oil reset, ABS bleeding, DPF regeneration, injector coding, TPMS reset, BMS reset, and EPB/SAS/TPS functions. Compatible with 72 vehicle brands and supporting multiple languages, it provides lifetime free updates and ready-to-use functionality out of the box.

Ancel MT700 is a portable motorcycle battery and starter/charging system tester. It measures actual starting capacity (CCA), battery condition and defective cells, and supports lead-acid, AGM (flat/spiral) and gel batteries. Operates at 8–16 V DC, offers reverse-polarity protection and tests starter cranking and charging performance. Supports standards (CCA, BCI, CA, MCA, JIS, DIN, SAE, GB), multilingual menus and PC data export. Includes MT700 unit, mini-USB cable and user manual.

Ancel MT100 is a compact diagnostic scanner for motorcycle engine and ABS systems. It supports OBD2 modes—reads and clears fault codes, shows live and freeze-frame data, I/M readiness and O₂ sensor checks. Compatible with OBDII-compliant Honda, Suzuki and Yamaha models that meet national Standard IV. Includes Suzuki, Yamaha and Honda adapter cables, a DAB adapter cable and a user manual.

The ANCEL BS200 is a 12 V engine starting aid using supercapacitor technology to assist with starting vehicles with a weak battery. It delivers a peak current of up to 700 A and can operate with battery voltages above 5 V. The device supports charging from the vehicle battery or via USB-C and can be ready for use within approximately 3–50 minutes depending on the charging method. With an operating temperature range from -40°C to 80°C, IP65 protection and a rated lifespan of up to 100,000 charge and discharge cycles, it is designed for repeated use in demanding conditions.

The ANCEL MT100 PRO is a diagnostic scanner for motorcycles from brands including Honda, Yamaha, Suzuki, Kymco, SYM and Hero. It can read and clear engine and ABS fault codes and supports OBDII diagnostics for compatible vehicles. The scanner supports CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000 protocols. A 2.8-inch colour TFT display provides a clear overview of diagnostic data, while the function buttons simplify menu navigation and operation. The available functions depend on the motorcycle's make, model and model year. Software updates can be installed via USB connection to a computer.

The ANCEL MT300 BMW is a diagnostic scanner designed for BMW motorcycles, providing access to fault-code reading and clearing, system scanning, live data, and selected service functions. It features a 3.5-inch colour TFT display and supports automatic vehicle identification through Auto VIN. The scanner also supports OBDII diagnostics and major protocols including CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000, making it suitable for OBDII-equipped vehicles manufactured since 2000. Depending on the motorcycle, available functions include ABS bleeding, oil and ETC reset, throttle position adjustment, and access to systems such as DME, ABS, KOMBI, SME and ESA2.

The ANCEL L5000 PRO is a diagnostic leak detector for automotive systems that uses air and smoke to locate leaks. It supports low-pressure testing at 0.5 psi, high-pressure testing at 20 psi and adjustable pressure from 0.5–20 psi. The device can perform air, smoke, pressure decay and vacuum leak tests, making it suitable for systems such as EVAP, air intake, exhaust, intercooler, oil and water circuits. An LCD display and four-button control panel provide straightforward operation, while the built-in self-test function assists with troubleshooting. The unit is designed for 12 V vehicle electrical systems and delivers a flow rate below 8 l/min.

Ancel BM700 is a professional OBD2 scanner tailored for BMW, MINI and Rolls-Royce, delivering workshop-level diagnostics at home. It reads and clears fault codes, shows live sensor data, runs I/M readiness and EVAP tests, and accesses VIN/calibration info. Advanced BMW service features include CBS resets, DPF regeneration, battery registration, SAS calibration, throttle and transmission adaptations. Also functions as a universal OBD2 scanner for other makes. Intuitive menus and a clear LCD simplify complex tasks.

Compact dual-mode leak detector for air and smoke testing of intake, EVAP, EGR, exhaust, cooling, crankcase, turbo and cabin systems. Built-in smoke generator (6–8 L/min), digital pressure gauge with selectable units (PSI/Bar/kPa/kg/cm²), adjustable smoke flow and internal air pump enable fast, precise leak detection without an external compressor. Protective functions include overheat shutdown and anti-frost operation. Oil level indicator, easy controls and clear readouts. Supplied with hoses, adapters, power cord and service accessories for workshop use.

The ANCEL MT310 is a motorcycle diagnostic scanner with a 3.5-inch colour TFT display and support for BMW, Harley, Honda, Yamaha, Suzuki and Kawasaki motorcycles. It provides access to diagnostic functions such as reading and clearing fault codes, viewing live data and checking vehicle information. Auto VIN enables automatic vehicle identification, while manual selection is available when required. The scanner also supports OBDII and protocols including CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000, making it suitable for many motorcycles manufactured since 2000. Available functions vary according to the motorcycle model and configuration.

Ancel S160 is a 12V leak detection smoke generator with built-in air pump, operating in Smoke and Air modes at 0.8–14.5 PSI and <10 l/min flow. It detects leaks in intake, crankcase, EVAP, cooling, fuel and exhaust systems. Features include rapid smoke generation (<10s), built-in pressure gauge and flow meter, overheating and freeze protection, metal housing, ergonomic handle, and a full accessory set including hoses, adapters, clamps and funnel.

Ancel PB500 is a compact 12–24V circuit tester for cars, trucks, motorcycles and boats. It offers seven diagnostic modes — DC/AC voltage, resistance, diode test, frequency, duty cycle and injector circuit checks — displayed on a color TFT for real-time analysis. Built-in overload protection, an LED probe tip and simple button control speed up fault finding. Supplied with battery lead, probe extender, diagnostic hook, extension cable, protective case and manual.

The Ancel S100 is a compact automotive smoke leak detector that helps pinpoint leaks in EVAP, fuel, exhaust, and cooling systems. It heats up in just 1 minute, operates at a safe 0.5 PSI, and includes safety features like overheat and reverse polarity protection. Perfect for workshops, it ensures fast, accurate diagnostics even in hard-to-reach places.

Ancel S3000 is a compact diagnostic leak detector for vehicles, supporting Smoke and Air modes for EVAP, turbo, EGR, intake, fuel, cooling, exhaust and vacuum systems. It features a pressure gauge, flow meter with adjustable knob, independent mode control, thermal protection, and metal housing with hook and Velcro strap. Dense, stable smoke highlights leaks after 20 ml of test oil. Complete with hoses, adapters, funnel, clamps and user manual.