Unidrain Highline RS 800 -paneeli

Outlet-talo Unidrain Ø32 vaakasuoraan ilman vesilukkoa.

Sampakin kulmamalli.

Sisältää irrotettavan vesiansan (voidaan erottaa ja puhdistaa). 180° kääntyvä, kun tarvitaan taaksepäin suuntautuva ulostulo.

Ulostuloyksikkö | linja | Ø 50 mm vaakasuuntainen sivuulostulo, sisältäen vesilukon

Runko Unidrain 1500 1000X12 mm.

Runko Unidrain 1500 800X10 mm.

Runko Unidrain 1500 700X10 mm

Runko Unidrain 1500 700X8 mm

Kiinnityslaite Unidrain 1004 ilman reunusta, pituus 800 mm.

Kiinnityslaite Unidrain 1004 ilman reunusta, pituus 700 mm.

Lattiakaivo Unidrain 1001, 1200 mm.

Kiinnityslaite Unidrain 1002, 900 mm kulma vasemmalle.

With side drain on the left.

Can be freely positioned against the back wall, independent of any side walls. Only for use with ClassicLine.

Horizontal outlet Ø 75 mm, including water trap.

Two horizontal side inlets, 40 mm, which can be opened as needed. 2 rubber adapters are included so that side inlets can be reduced to 32 mm. Easy access to the removable water trap for cleaning. Meets EN1253 standard and is VA approved.

Tyhjennysyksikkö takaseinää ja vasenta seinää vasten. Suihkukaappiin, jossa on avoin vasen sivu, lasiseinä tai vastaava. Tyhjennysyksikössä on kaksi seinän flanellia ja kaksi lattian flanellia.

The set consists of the Custom base, rail, heightener set and screws.

The set must be assembled before installation.

Glue your own floor tile to the base, to complete the solution.

The Custom solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit.

Special glue for adhesion of your own tile and 10 x 6-mm spacers to use for installation are also included.

The shower door is adapted to the height and width of the Unidrain GlassLine shower screen.Must be combined with a Unidrain top rail (p. 91). Tile thickness including tile mortar: 8-12 mm.The surface is treated with GEWE-clean® nanotechnology on the interior side of the glass.Supplied with 2 hinges and sealing strip.

10-mm tempered glass.The surface is treated with GEWE-clean® nanotechnology, so that the shower screen can be right- or left-aligned.No visible screws and fittings in the finished result.The solution fits tile thicknesses up to 15 mm for wall tiles and up to 20 mm for floor tiles.

10-mm tempered glass.The surface is treated with GEWE-clean® nanotechnology, so that the shower screen can be right- or left-aligned.No visible screws and fittings in the finished result.The solution fits tile thicknesses up to 15 mm for wall tiles and up to 20 mm for floor tiles.

To finish the shower screen.A top rail is recommended to stabilise shower screens measuring 1200 mm.The top rail is available in one length. Cut to fit the individual shower cubicle.

10-mm tempered glass.The surface is treated with GEWE-clean® nanotechnology, so that the shower screen can be right- or left-aligned.No visible screws and fittings in the finished result.The solution fits tile thicknesses up to 15 mm for wall tiles and up to 20 mm for floor tiles.

ShowerLine has a built-in slope, so that the floor in the shower cubicle slopes correctly by 2% down towards the floor drain. For added wetroom safety, the shower cubicle is framed by flanges on three sides.

The shower screen is mounted in the track on the fixed module, to eliminate the risk of working loose over time.

Combine with: Outlet unit, frame, grating/panel and shower screen.

Can be freely positioned against the back wall, independent of any side walls. Only for use with ClassicLine.

ShowerLine has a built-in slope, so that the floor in the shower cubicle slopes correctly by 2% down towards the floor drain. For added wetroom safety, the shower cubicle is framed by flanges on three sides.

The shower screen is mounted in the track on the fixed module, to eliminate the risk of working loose over time.

Combine with: Outlet unit, frame, grating/panel and shower screen.